Camping Kitchen - Weather-Resistant

The drawer dimensions of the MORryde Trail Kitchen for Jeep Wrangler Or Wrangler Unlimited #MR83MR are 15-3//4 inch wide by 25-1/2 inch long by 6.6 inches tall.

The top tray on the MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler #MR83MR measures 0.947" so you're looking at just under an inch tall, which I confirmed with my contact at MORryde. Hope this helps you out!

Hey Lynn, yes the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR could be used to lift a fifth wheel trailer frame like you asked about. This has a height range of up to 37-3/4 inches and a 12k capacity so it would work great for you.

The height of just the mounting bracket of the MORryde part #MR73QR is 6.6 inches and the length is 30 inches. It weighs 84 lbs.

Hello David, thanks for getting in touch. The 2019 GMC 1500 AT4 has a 2" lift, and the #AL88388 kit you mentioned has taller brackets to fit the 2" lift. I looked up the X31 model and it does say it has offroad suspension, but it didn't…

Hey Doug! The Napier Truck Bed Tents all have a full tape-seamed floor. You can choose from the following based on style, truck bed size, and color: -Napier Backroadz Camo Truck Bed Tent - 5' Bed - 2 Person - Camouflage #NA37FR -Napier Backroadz…

The MORryde Trail Kitchen with Stove Tray #MR73QR has a platform that is 25-1/2" long and 15-3/4" wide. The Dometic CFX75 Cooler is 34.92" long and 19.48" wide which is much to large to fit this platform. Of the Dometic Coolers…

Due to the Countertop Extension #MR95MR fitting into pre-existing mounting holes on the MORryde Trail Kitchen #MR83MR (see the included picture), it will be driver side specific. These mounting holes do not appear on the passenger side,…

I went out to the warehouse and pulled a Rola cargo basket extension #59505 to take some measurements. The overall length is 22-3/4 inches but the useable length, once installed, will 18-3/4 inches. Overall width is 40-11/16 inches. Width on the…

Hey Olegas, yes you can install what I think you're describing as a trailer hitch on your 2025 Honda HR-V. As long as your trailer and motorcycle combined don't weigh more than 2,000 lbs then you can use the Curt Trailer Hitch Receiver…

No, it does not but Firestone does make one. It is the No-Drill Mount Kit for Firestone Air Tank and Compressor item #F2530. This will allow you to get the Firestone Air Command Extreme Duty Air Compressor with Tank item #F46VV installed and you…

Sounds like you are looking for something like the Erickson Adjustable Wheel Net part #77314 which attaches to a section of E-track and holds a vehicle wheel securely. This is pretty similar to the Pack Em #PK-WTD that you referenced as well.