Backup Camera - Rear Mount, Furrion

...Hey Bill, yes the Furrion Vision S+ # FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though...

Hi Bob! We have you covered for both. For the base plate, I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM77GR. They make the best base plate in the industry and are the ones to get. That said, do you already have tow…

Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…

...Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System # FR57AD, # FR74AD, and # FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must...

...Can I use this to replace the old Furrion AC on my 2022 Grand Design travel trailer? Will it work with everything else I have installed...

Hey Darrel. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks item #RM-2460-2580 is without a doubt the best upgrade you can make to your Grand Design's suspension system. It's going to come with everything you need to swap out…

...Im looking for a 3.5 monitor only for a Furrion S+ I can only find a 5 on your website. Must be looking in the wrong place...

Hey Butch, on the B and W Continuum Weight Distribution System part #BW94BR the distance from the center of the hitch pin hole to the center of the hitch ball is 11-3/8 inches. Is that enough clearance for you?

...I have a Vision S on my travel trailer right now and I need to replace it. My trailer was pre-wired for Furrion before. Will the Vision S+ fit the same mount and plug right in...

Hey James, the best diamond pattern snow chain we have that fits your tire size of 285/70R17 would be the Konig part #KON44FR if you wanted the easiest install, the best traction and the longest life from the set. If you wanted a lower priced option…

Hey Jim, we had a customer of ours with a similar Kia Sorento SX to yours let us know that the Curt harness part #C63RV did fit so it would work great for your 2021 model. Do you have a hitch already?

Hey Michael, we have a version of the B and W Continuum that fits 2.5 inch hitches with the part #BW53FR but we do not have a very version for this hitch size that has an extended length shank. Do you need the added length shank?