Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…
Hi Carl; the saddle attachment on the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR is 3-1/4" wide at the base of it before the sides flare out. What will you be using the jack for?
Hey Todd, The Power Mountain TallBoy Off-Road Jack is a single piston hydraulic jack. Designed to lift 12,000lbs with a lift range of 8-1/2" all the way up to 37-3/4". What kind of off road vehicle do you have?
Hey Todd! At the lowest setting, the saddle of the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR sits at 14" and the top of the saddle arms are at 15-3/8". I took a photo of it out in our warehouse, and while I wasn't able to get…
Hello Warren, The Vitrifrigo #VT79FR is a fantastic pick for a box van kitchen because it’s compact, efficient, and designed with mobile living in mind. It gives you 2.6 cubic feet of storage space (enough for a good amount of fresh food, drinks, and…
Hey Kevin. The only suggestion I have would be to buy a hardcase and store the jack in it. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only available with the included bag. The bag is helpful because a hydraulic bottle jack needs…
Hey Howard, the easiest way to determine what your total trailer weight is would be to find a local weigh station to you and just pull the trailer onto the scales. Then you can determine from there with a tongue weight scale like the part #BTBRV004…
Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…
Gerald, the 12-ton Tallboy #PM94FR weighs about 37 lbs all-in, including the base plate, extensions, and carry bag. It’s a little heavy, but that’s the tradeoff for stability and steel construction - the 9-1/2 inch base plate and solid risers are…
Hey Matt! Yes, you can store the #PM44FR on its side - just make sure the oil fill plug is facing up so it doesn’t leak (it shouldn't leak either way, but this is best practice). The manufacturer recommends doing that only for short trips though…
Hey Justin, thanks for reaching out! I went out to the warehouse and confirmed that the Curt Adjustable 2-Ball Mount #C79NR measures 12-1/4" from the center of the hitch pin hole to the center of the hitch ball. Not sure what tape measure Curt…
Filters
