First I want to make sure you verify your channel mount for the Demco Trailer Coupler #DM14040-81 has a 21K or larger capacity as often times they are less like the Demco #DM15349-52 which often times people look at and think it is a channel mount…
Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…
Hey Mark, no there aren't any locking pins you could use in place of the mounting bolts of the Curt Channel Mount Coupler part #C25329 that you referenced. Typically trailer thieves don't bring with them the exact size wrenches you'd need…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Hey, Danae. Sorry to that's going on with the Buyers Products RV Backup Camera part #3378883020. I know it may sound like a silly and basic question but have you checked the volume level yet? There's "+" and "-" on the…
The only difference between the Curt Channel-Mount Coupler - Squeeze Latch - 2-5/16" Ball - 15,000 lbs #C25328 and Trailer Coupler - Adjustable Channel Mount - Squeeze Latch - Black - 2-5/16" Ball - 15,000 lbs #CTA-280 is the manufacturer.…
I found a surge coupler that will work well on your trailer. However, the part that you referenced, #DM8204011, is designed only to work with drum brake systems. Disc brake systems need higher psi for the calipers to activate the brakes and drum…
All of that is not necessary. All you have to do is lock out the surge coupler so it cannot move in and out or disconnect the brake lines. By removing the old coupler you would have to remove the brake lines any way. A surge coupler can still be used…
Hi Dave! I am not aware of an adapter that will do what you want, so I think the etrailer Electric Trailer Jack w/ 7-Way - Drop Leg - A-Frame - 22-1/2" Lift - 5K #e74GV is your best option. It is also the quickest and easiest way to proceed.…
Dutton-Lainson does not give a separate holding capacity for their Pipe Mount Jack #DL22685. The Fulton Drop-Leg Stabilizer Jack #FSJ1-SJ2 is one of the popular options for your type of situation. Each of these have a 3,000lb capacity so with one on…
You certainly can use the Trimax Coupler lock #TMX47FR with the Demco 2-5/16" Ez latch coupler like the #DM14040-81. The Demco coupler is 2-7/8" wide on the outside so it will undoubtedly fit with the Trimax lock, which is more or less…
Hello David, thanks for reaching out. It is possible to switch your trailer over to a lunette ring/pintle hitch system. Basically you will need to replace your current A-frame coupler with a channel coupler like part #LR76VR. This will allow you to…
Filters
