2011 Land Rover LR2 Cabin Air Filter

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You need 45-1/2" crossbar system for your 2023 Subaru Ascent raised rails, so the correct complete roof rack system is the following: - Yakima TimberLine FX Roof Rack for Raised Side Rails #Y68UV You can then add lock cores for the roof rack…

The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long…

Hey there Don; the Curt #C13329 and etrailer #e33AR are the only 2" hitches confirmed to fit your friends 2018 Niro Hybrid. These hitches are compatible with the standard hybrid, which it sounds like your friend has, just not the PHEV or EV.…

Hey Bill, yes the Air Lift Load Lifter part #AL57385 that fits your 20116 Ford F-150 does fit with your B and W Gooseneck hitch. The Compressor kit part #AL25980 also fits too. Are you getting some sag when you are towing your gooseneck trailer?

Hey Uwe, I would definitely go with the Hellwig Load Pro 35 part #HE93XR over the Timbren. The Timbrens are notoriously harsh and bouncy and since that's not what you want I would definitely avoid them at all costs. Hellwig will give you the…

Hi Dave; yes, the Curt #C94WR also fits the 2025 Hyundai Tucson Hybrid. You can actually see it on a hybrid model in the picture I added to this page. The hitch has the 2" receiver you need and a max tongue weight of 525 lbs to handle your bike…

Hi Bill; I'm not surprised the #T53MR gives you a rough ride since it is the severe service kit. Timbren SES isn't overly forgiving to begin with, and this particular design is for constant loads like a slide-in camper. I would recommend the…

For your 2018 Jeep Wrangler JL, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #DT78MR is a great option made by the same manufacturer as Reese components. The Curt Trailer Hitch Receiver - Custom Fit - Class III -…

The differences between the Yakima HoldUp #Y02443-2 and the HoldUp EVO #Y02479-2 include an integrated SpeedKnob to take out movement of the bike rack, an easier system for tilting the bike rack, and the ability to add fat bike tires (up to 5"…

Hey Ryan, The Demco Hydraulic Brake Actuator #DM72VR is approximately 18-1/8" long and 6" tall (9-1/4" if you include the height of the breakaway lever).

The problem is either the power or the ground side of the wiring of the LED assemblies. First thing to do is check that 12 volts are making it to the trailer connector. You can use a circuit tester like our part #3808. Next, trace the wiring back to…