2027 Jeep Wagoneer Bug Shield

Hey Matt, welcome back! The Installation Bolt Kit for 5th Wheel Pin Boxes and 5th Wheel to Gooseneck Adapters item #GY86FR uses twelve 5/8" Grade 8 bolts that should be tightened to 160 ft-lbs. This kit is exactly what you need to install the…

Hey Keith, yes the Reese Ford puck adapter part #RP30156 that you referenced is what you would need. This fits the OEM pucks of your 2019 Ford F-450 and also provides the type of rails that your Pullrite ISR hitch is designed to fit so it work…

Hey Rob, congrats on the new SUV. To add a hitch to your 2026 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit for your Pilot and comes with all hardware necessary for installation. The etrailer item #e27KR is a class III…

Hey Ralph, the Putco Window Visors part #P45QR that you referenced are in-channel mount like you asked about.

Hi Dan; the WeatherTech Custom Fit Hood Protector #WT94BF only has the small WeatherTech logo in the corner. This does not have "Super Duty" imprinted on the hood protector.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…

Hey Roger, a set of chains on all 4 of your tires like the Konig part #TH01571255 is going to give you the best traction for your Sprinter. I really like these Konigs because of how well they improve traction, how easy they are to install, and how…

Hi Gerald, It cannot; I checked with WeatherTech for you and the WeatherTech Custom Fit Hood Protector #WT28BQ that fits your 2024 Chevy Silverado 1500 should not be taken through that type of car wash. Per the instructions, it says, "Do not use…

Hey Adam, yes the B and W hitch part #BW47BR that you referenced is a confirmed fit for your 2025 Toyota RAV4 plug in hybrid. What are you planning on using the hitch for?

Hey James, thanks for reaching out. Aluminum valve stems, especially the clamp-in style, are built for high pressure and can typically handle up to around 200 psi. That’s a big step up from standard rubber snap-in stems, which are usually rated for…

It definitely will Michael. The Reese Elite Series Underbed Rail Adapter item #RP30156 is going to drop right down into your F-350's factory puck system and provide you with a base equivalent to a set of industry standard 5th wheel rails.…