2010 Chevrolet Express Van BOLT brand vehicle and hitch locks

Hello Tyler, thanks for reaching out. We may have what you need, but I will need more information in order to know what locks will work. Does your ARE cap use the Bolt brand locks that key to your ignition key? If so, the Replacement Lock Cylinder…

Thanks for reaching out, Hal! That's a really good question. Based off what I could find, if the old cylinder worked with your ignition key you would want to get part #BL692918. I included the ignition key compatibility diagram below for you. You…

Hey Jeff, thanks for reaching out. I just went out to our warehouse and measured the P&F Products J-Channel Rail for Enclosed Trailers #PF26FR. The interior dimension of the J-channel I measured at 0.17". What thickness plexiglass were you…

Hey John. The Replacement Lock Cylinder for BOLT Toolbox Latch - Codes to Ford Side-Cut Key item #BL7025636 isn't available with a standard key. This ones designed to work with the factory key that came with your 2020 Ford F-150. I've…

Hey Jonathan, We do have a kit from Infinite Rule for locking pins specifically for that B&W Tow And Stow With Pintle #IR52FR. This comes with the specific locks needed for that pintle hook you have and will have all points lockable. What are you…

Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…

Hey there Daniel - it really depends on your trailer height and what you’re loading. The 6' RapidRamps kits (part numbers #e47XV for 5–6-1/2' wide trailers and #e67XV for trailers over 6-1/2' wide) give you a gentler approach angle, which…

Unfortunately The Replacement Lock Cylinder for BOLT Toolbox Latch #BL692917 is not confirmed to fit your 2020 Ford F-350 Super Duty. You will need The Replacement Lock Cylinder for BOLT Toolbox Latch #BL7025636. This lock will work with your side…

Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…

Hi Mark; B&W does not have a 3" version of the Tow & Stow Pintle Hook at this time. What you can do is use the #BW77BR for a 2-1/2" hitch along with the BTBRV Magnetic Hitch Receiver Reducer Sleeve #BTBRV74FR. The reducer sleeve…

Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…