# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Performed as designed
The trailer hitch ball mount fits great. The floor mats for on the 2016 Honda Odyssey fits nicely and the color choice turn out nice.
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
The Ball Mount Kit makes it easy to change from 1 7/8 to 2" ball without tools. Great design and carrying bag is very convenient touch. As with any ball mount a large wrench is needed. Also making sure the ball mount pin doesn't turn when installing is somewhat difficult. But once installed this is an outstanding product.
The hitch was delivered on time as scheduled. It looks great and will fit the van perfectly. I will provide a follow up post once it's installed and functional. This is my 5th hitch from etrailer and i wouldn't buy from anyone else. Thanks etrailer!
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
The trailer hitch ball mount fits great. The floor mats for on the 2016 Honda Odyssey fits nicely and the color choice turn out nice.
Great website, very informative about each product. The how to videos make the installation of the product easy to understand. Product was delivered on time and undamaged. This product was installed on a 2016 Honda Odyssey, with the low ground clearance of a mini van I needed a hitch that would set my trailer to the correct height to make my trailer level while towing. this product corrected that issue for me.
# 4
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
I have had absolutely no issues with this product, or for that matter, any of the products I have purchased from etrailer... wish they made more of the products I use. love the Youtube instructional videos too. Thanks for selling a great product and having great customer service
The Ball Mount Kit makes it easy to change from 1 7/8 to 2" ball without tools. Great design and carrying bag is very convenient touch. As with any ball mount a large wrench is needed. Also making sure the ball mount pin doesn't turn when installing is somewhat difficult. But once installed this is an outstanding product.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 6
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
I have never regretted ordering through etrailer. As always, this order arrived precisely on-time. The wiring for trailer lights proceeded exactly as expected. The online video describing the installation was very helpful with no surprises encountered while following the instruction. Don't forget to order a hitch pin. Surprisingly, it wasn't included with the drawbar.
The bar was exactly as I expected, but there were two deep dings that penetrated the paint and actually deformed the underlying metal. Disappointing as this is, knowing that it will probably develop rust prematurely while in use, I decided to not go through the hassle of requesting a replacement unit.
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Very please with the purchase. Solid construction and raised the overall height of the receiver hitch on my Honda Odyssey with added ground clearance. Excellent service/shipping from eTrailer as usual.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 8
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 9
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 10
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Works as intended, pretty rock solid. Note on here said to only use it in the RISE position, not the drop position.
I wanted to attach a small luggage carrier behind my odyssey. I had to grill another mounting hole to alter the angle so it would not drag. Excellent product. Was able to customize it easily. Thank you.
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you
Works great. Needed the drop to tow a utility trailer at level.
# 12
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
The trailer hitch ball mount fits great. The floor mats for on the 2016 Honda Odyssey fits nicely and the color choice turn out nice.
Great website, very informative about each product. The how to videos make the installation of the product easy to understand. Product was delivered on time and undamaged. This product was installed on a 2016 Honda Odyssey, with the low ground clearance of a mini van I needed a hitch that would set my trailer to the correct height to make my trailer level while towing. this product corrected that issue for me.
# 13
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 14
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
I wanted to attach a small luggage carrier behind my odyssey. I had to grill another mounting hole to alter the angle so it would not drag. Excellent product. Was able to customize it easily. Thank you.
Works as intended, pretty rock solid. Note on here said to only use it in the RISE position, not the drop position.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 16
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 17
Curt Fusion Ball Mount for 2" Hitches - 1-7/8" Ball - 2" Rise - 5,000 lbs
Fits snug with the built-in tapers. Seems sturdy. Hopefully will last a long time.
Exactly what i ordered and it came fairly quickly! Im very happy worh everything!
# 18
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
Very convenient kit. Nice to have the locking pin and receiver cover. I reversed to the 2" rise position since my 2016 Honda Odyssey already sits low to the ground.
# 19
Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 20
Draw-Tite Ball Mount - 6-3/4" Rise, 8" Drop - 10" Long - 5,000 lbs
Great website, very informative about each product. The how to videos make the installation of the product easy to understand. Product was delivered on time and undamaged. This product was installed on a 2016 Honda Odyssey, with the low ground clearance of a mini van I needed a hitch that would set my trailer to the correct height to make my trailer level while towing. this product corrected that issue for me.
The trailer hitch ball mount fits great. The floor mats for on the 2016 Honda Odyssey fits nicely and the color choice turn out nice.
What our customers are saying:
"Fast Shipping They are AOK Thanks"