# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
The hitch that I purchased for my Murano fit exactly and was a snap to install. It only took about an hour and the instructions were great. The wiring kit and controler took about an hour also. I'm glad the instructions for this kit were so clearly written. Thanks again for the great products and support. This is the third car I have equipped for towing with the help of etrailer.
Easy to purchase and extremely fast delivery. And the product product is amazing. I recommend you shop with etrailer!
# 2
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
The hitch that I purchased for my Murano fit exactly and was a snap to install. It only took about an hour and the instructions were great. The wiring kit and controler took about an hour also. I'm glad the instructions for this kit were so clearly written. Thanks again for the great products and support. This is the third car I have equipped for towing with the help of etrailer.
Easy to purchase and extremely fast delivery. And the product product is amazing. I recommend you shop with etrailer!
# 3
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Excellent product. Received the hitch receiver and wiring harness for 2015 Nissan Murano. Received package very quickly after order was processed, and all materials arrived in perfect condition. Installation was very easy, especially as I am a novice when it comes to car installations. All clips on harness matched up perfectly and hitch receiver fits perfectly into Pre-cut holes on car frame. I highly suggest watching video demo of both installations provided by etrailer.com. Thank you for a successful order and installation.
# 4
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Quality of product is excellent! Heavy metal, solid welds, great finish! Shipping was faster than promised. Communications were excellent. I'll certainly look here next time I have need. I highly recommend!
totally awesome folks to deal with... service was great. Their website very user friendly and was able to find materials specific to my car. Keep up the good work folks.
# 5
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 6
Curt Ball Mount for 2" Hitches - 5" Rise, 6-1/8" Drop - 9-3/8" Long - 10,000 lbs
Perfect size for my application thanks to the etrailer website recommendation.
# 7
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 8
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
# 9
Curt Dual Length Ball Mount for 2" Hitches - 4-1/2" Rise, 5-3/4" Drop - 7,500 lbs
Perfect for our 2019 Shadow Stablemate Trailer and 2017 Hyundai Santa Fe.
Didn't work out for it's intended purpose. Wanted it to use on my mini van to pyll Scamp travel trailer. But I couldn' open my tailgate without unhitching the trailer
# 10
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Slightly longer, so you can open your tailgate with a cargo trailer attached. Trailers with a tongue jack that is forward are problematic for tailgates...
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
# 11
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Excellent product. Received the hitch receiver and wiring harness for 2015 Nissan Murano. Received package very quickly after order was processed, and all materials arrived in perfect condition. Installation was very easy, especially as I am a novice when it comes to car installations. All clips on harness matched up perfectly and hitch receiver fits perfectly into Pre-cut holes on car frame. I highly suggest watching video demo of both installations provided by etrailer.com. Thank you for a successful order and installation.
# 12
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
Gave me the right lift to tow a small utility trailer with my wife's Murano. Received the hitch in just a few days with the appropriate 2" ball. Both products look to be of high quality. Couldn't be happier.
# 13
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
I should have paid closer attention to the hole dimension of this item. A lot of times when you buy a product, you get a notification that says “people that bought this item also bought”, then it lists additional related items. That is when I bought the wrong size ball, I bought the first one that was shown, assuming it would fit. I neglected to read the description in detail.
# 14
Brophy Ball Mount - 5" Rise, 6" Drop - 16" Long - Aluminum - 8,000 lbs
Perfect for my Tahoe. I have a 2019 Tahoe LS 4x4 with the max tow package. The receiver is mounted higher than than on the truck it replaced. Six inches of drop appears to be just about right for my boat trailer.
I bought a new trailer that came with a tongue mounted jack stand. The problem was the hand crank was to close my truck and prevented me from lowering my tailgate while the trailer was connected, by about a 1/2 inch. I had a standard steel 6 inch drop Reece ball mount. This one has more weight capacity, but is half the weight of the older ball mount. It added just enough distance from the truck I can put the tailgate down!
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Good, very solid ball mount with just the extra rise I needed, 2 3/4", to get level trailer and good clearance for the trailer jack. But excessive shipping charges from etrailer, $[XX] for an $[XX] purchase. Found out to my cost later that [online vendor] would have shipped for free.
As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon. Thanks etrailer for a great experience !
# 16
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 17
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.
This simple ball mount will get the job done. It's a solid casting so it weighs a lot.
# 18
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 19
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
Easy ordering, fast shipping and a quality product. I can't believe how much this Brophy Ball Mount Hitch weighs! Incredible.
# 20
B&W Heavy-Duty Ball Mount - 1" Rise, 2" Drop - 8-1/2" Long - 16,000 lbs
Perfect size for my application thanks to the etrailer website recommendation.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."