bing tracking image

Best 2013 Dodge Durango Bike Racks

change vehicle


Bike Rack Videos

Yakima FullTilt Hitch Bike Racks Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango, we're going to be doing a test fit on the Yakima Full Tilt. This is our 4-bike folding and tilting style rack. It's been designed for use with 1 1/4 inch or 2-inch hitches. Part number on it is Y02462. Now, you can also get this in a 5-bike if you prefer, Y02463 will be that part number. To begin our test fit, we're going to slide the shank into the receiver tube of our hitch.



Saris Bike Porter Hitch Bike Racks Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango, we are going to be doing a test fit on the Saris Bike Porter. This is a folding and tilting 4 bike rack. It's been designed for use with inch and a quarter or two inch hitches. The part number on it is SA404B. Now this is also available in a two bike configuration if you'd prefer that, part number there is SA402B. To begin the test fit we are going to slide the shank of the rack into the receiver tube of our hitch. We slide it in far enough to line up that threaded hole with our hitch pin hole.



Saris Axis Hitch Bike Racks Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango we're going to be doing a test fit on the Saris Axis. This is a 2-bike folding and tilting-style rack. It's been designed so you can use it with an 1-1/4" or 2" hitches. The part number on it is SA832. Now this is also available in a 3-bike as part number SA833, or a 4-bike as part number SA834B. To begin the test fit we'll slide the shank of the Axis into the receiver tube of our hitch. We'll line up the threaded hole with our hitch pinhole.



Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango we're going to be doing a test fit on the Saris Freedom Superclamp. This is a 2-bike platform-style rack designed for 1-1/4" or 2" hitches. Part number on it is SA4025. Now to begin our test fit we're going to slide the shank of the rack into the receiver tube of our hitch. We'll line up our threaded hole with our hitch pinhole. With those in line we can our standard anti-rattle bolt. You will want your washer to be on there.



Thule Domestique Roof Bike Rack Review - 2013 Dodge Durango

Today on our 2012 Dodge Durango we'll be test fitting the Thule Domestique fork mount roof mounted carrier, part number TH513. Now this vehicle is equipped with factory installed cross bars so to begin our test fit we'll sit the carrier onto the vehicle and loosen up the front and rear sets of bracket to swing on the underside of the cross bar. Then use the included Allen key to tighten it down and secure the carrier to the vehicle. Note that you cannot access the Allen bolts without removing the skewer in the front part of the carrier. Now with the carrier secured to the vehicle we're ready to load our bike. We'll undo the cradle strap, slide the skewer to the front part of the carrier, and sit our bike onto the carrier.



Thule Doubletrack Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Thule Doubletrack platform style two bike carrier, part number TH990XT. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 12 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about two inches. With the platform folded up weve added about 10 inches to the overall length of the vehicle.



Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Thule Apex Swing four bike carrier, part number TH9027. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, insert the spring-loaded pin into the pin hole and turn the black knob to engage our anti-rattle device. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 13 inches of ground clearance. From the closest part of the carrier to the closest part of the vehicle here at the rear bumper is about two inches. With the cradle arms folded down weve added about 11 inches to the overall length of the vehicle.



Yakima StickUp 2 Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Yakima Stickup two bike carrier, part number Y02420. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin hole and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 13 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about two inches. With the platform folded up weve added about 11 inches to the overall length of the vehicle.



Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Yakima Doubledown Ace four bike carrier, part number Y02451. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, insert our pin with the red knob into our pin hole and turn the black knob at the base of the carrier to engage our anti-rattle device. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 12 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about five and a half inches. With the cradle arms folded down weve added about 10 inches to the overall length of the vehicle.



Thule Vertex 4 Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Thule Vertex four bike carrier, part number TH9029. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 4inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about five inches. With the cradle arms folded down weve added about 11 inches to the overall length of the vehicle.



Softride Dura Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Softride Dura Parallelogram tilting four bike carrier, part number SR26247 To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 13 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle is about six inches. From the cargo door to the end of the cradle arms is about 38 inches. To load the bike well undo the cradle straps, set the bike into the frame cradles and secure it with the straps.



Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Hollywood Racks Traveler five bike carrier, part number HR9200. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten with a wrench. Now well go ahead and go over a few measurements to see how the bike carrier and this vehicle will fit together. Theres about 13 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about 11 inches. With the cradle arms folded down weve added about 13 inches to the overall length of the vehicle.



Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Hollywood Racks Traveler four bike carrier, part number HR8500. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin hole and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 13 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about six inches. With the cradle arms folded down weve added about eight inches to the overall length of the vehicle.



Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango, we'll be test fitting the Thule Hitching Post Pro, part number TH934XTR. Now to begin our test fit, we'll slide the bike rack shank into the hitch using the included adapter for the 2-inch hitch. We'll line up the hitch pin hole and install and tighten down our anti-rattle bolt. With the anti-rattle bolt tight, our bike is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance here at the bike rack is 12-1/4 inches and from the closest point of the bike rack to the back of the vehicle is 7 inches.



Kuat Sherpa Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Kuat Sherpa Aluminum Hitch Mounted 2 Bike Carrier part number S102. To begin our test fit using the included 2-inch adaptor well slide the bike rack shank into the hitch, line up the hitch pin hole and install our hitch pin. Well then move to the back of the shank where well tighten the knob securing the bike rack to the vehicle. We can now go ahead and give you a few measurements. Our ground clearance here at the bike rack is 13-1/2 inches. From the closest point of the bike rack to the back of the vehicle is 3-1/2 inches.



Thule Apex 4 Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Thule Apex 4 Bike Carrier part number TH9025. Now to begin our test fit well slide the bike rack shank into the hitch and allow the integrated locking hitch pin to fall into the hitch pin hole. We can then move to the anti-rattle knob where well tighten it down securing our bike rack to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance here at the bike rack is 13-1/2 inches and from the closest point of the bike rack here at the anti-rattle knob to the back of the vehicle is 2 inches. Well now pull the hitch switch here at the base of the rack which will allow us to tilt the mast down.



Swagman Titan Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango, we'll be test fitting the Swagman Titan 4 Bike Carrier, part number S63410. Now with our included adapter for the 2-inch hitch already installed, we'll go ahead and slide our bike rack shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With our bolt tight, our bike is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance here at the bike rack is 16 inches and from the closest point of the bike rack to the back of the vehicle is 10-1/2 inches. We'll now go ahead and pull the switch here at the base of the rack which will allow us to tilt the mast down.



SportRack Escape 3 Hitch Bike Rack Review - 2013 Dodge Durango

Today on our 2013 Dodge Durango will be test fitting the SportRack Escape 3 Bike Hitch Mounted Bike Carrier for both 1-3/4 and 2 inch hitches, Part Number A30403. Now to begin our test fit, we'll slide our bike rack shank into the hitch, line up the hitch pinholes, and install and tighten down our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now, we can go ahead and give you a few measurements. Our ground clearance here at the bike rack, measures 12-1/2 inches. From the closest point of the bike rack to the back of the vehicle is 8-1/2 inches.





2013 Dodge Durango Bike Rack Questions