Yakima StickUp 2 Hitch Bike Rack Review - 2013 Dodge Durango

Review of the Yakima StickUp 2 Hitch Bike Rack on a 2013 Dodge Durango

Today on our 2013 Dodge Durango well be test fitting the Yakima Stickup two bike carrier, part number Y02420. To begin our test fit well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin hole and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 13 inches of ground clearance. The closest part of the carrier to the closest part of the vehicle here at the rear bumper is about two inches. With the platform folded up weve added about 11 inches to the overall length of the vehicle.

We can now pull the red knob at the base of the carrier to tilt the platform down and well measure from the rear bumper to the end of the platform and well get a measurement of 32 inches. With the platform folded down we can now have access to our cargo area. To load the bike well pull the red pin at the center of the platform to unfold the mast. Well put the frame hooks to the top of the mast and well undo the strap. Well set the bike into the wheel trace, adjust the frame hook tightly against the frame and secure with the strap.

That completes todays test fit for the Yakima Stickup two bike carrier, part number Y02420 on our 2013 Dodge Durango.