Most Popular No Ball for 2011 Honda Odyssey

Pretty straight forward, Got what I ordered in a timely manner and was the correct part.

Excellent information from the catalog which got me exactly what I needed. All parts arrived in perfect condition. Delivery was fast. I needed additional height for my boat connecting to a 2011 Honda Odyssey so I used this part up-side-down. In this configuration it matches the hitch height on my truck.

Excellent information from the catalog which got me exactly what I needed. All parts arrived in perfect condition. Delivery was fast. I needed additional height for my boat connecting to a 2011 Honda Odyssey so I used this part up-side-down. In this configuration it matches the hitch height on my truck.

Pretty straight forward, Got what I ordered in a timely manner and was the correct part.

I have never regretted ordering through etrailer. As always, this order arrived precisely on-time. The wiring for trailer lights proceeded exactly as expected. The online video describing the installation was very helpful with no surprises encountered while following the instruction. Don't forget to order a hitch pin. Surprisingly, it wasn't included with the drawbar.

The bar was exactly as I expected, but there were two deep dings that penetrated the paint and actually deformed the underlying metal. Disappointing as this is, knowing that it will probably develop rust prematurely while in use, I decided to not go through the hassle of requesting a replacement unit.

Very please with the purchase. Solid construction and raised the overall height of the receiver hitch on my Honda Odyssey with added ground clearance. Excellent service/shipping from eTrailer as usual.

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.

This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.

As advertised and quick delivery, I am an Etrailer fan!

Strong and works perfectly!

Works as intended, pretty rock solid. Note on here said to only use it in the RISE position, not the drop position.

I wanted to attach a small luggage carrier behind my odyssey. I had to grill another mounting hole to alter the angle so it would not drag. Excellent product. Was able to customize it easily. Thank you.

I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you

Works great. Needed the drop to tow a utility trailer at level.

Excellent information from the catalog which got me exactly what I needed. All parts arrived in perfect condition. Delivery was fast. I needed additional height for my boat connecting to a 2011 Honda Odyssey so I used this part up-side-down. In this configuration it matches the hitch height on my truck.

Pretty straight forward, Got what I ordered in a timely manner and was the correct part.

With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.

Click to Enlarge

I wanted to attach a small luggage carrier behind my odyssey. I had to grill another mounting hole to alter the angle so it would not drag. Excellent product. Was able to customize it easily. Thank you.

Works as intended, pretty rock solid. Note on here said to only use it in the RISE position, not the drop position.

I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you

Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!

Click to Enlarge

Click to Enlarge

This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.

This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.

I ordered this extra length ball mount to keep the back end of my Honda Odyssey out of the water when I launched my boat. It does exactly what I wanted. It connects with the hitch I purchased from etrailer last year. Going to etrailer was my first step when I realized I needed additional length. I wish that more Internet companies had the service I get from etrailer. John Boddie

Great!

This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.

Excellent information from the catalog which got me exactly what I needed. All parts arrived in perfect condition. Delivery was fast. I needed additional height for my boat connecting to a 2011 Honda Odyssey so I used this part up-side-down. In this configuration it matches the hitch height on my truck.

Pretty straight forward, Got what I ordered in a timely manner and was the correct part.

This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.

This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.

Great instructions and video on this website. The item was ship right away.

Looks like the picture - I'm happy.

Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.

This simple ball mount will get the job done. It's a solid casting so it weighs a lot.

This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.

This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.