# 1
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
The product looks like good quality. I bought it to use a 1 1/4" bike carrier in a 2" receiver. I have not used it yet, however.
Nice product works great
# 2
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 3
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop - 10K GTW, 400 lbs TW
As advertised, delivered quickly, very stout and sturdy built out of solid square steel, not tubing. Powder coated for great lasting appearance. Very satisfied with this purchase. Haven't used the quiet hitch yet, but it looks to be well made and engineered.
Ordered exactly what I needed to lift my tow bar !!! Love that etrailer carries roadmaster products
# 4
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
Fantastic Product. Saved me from having to buy a brand new bike holder for my new car with a different hitch size.
Professional, delivered a day early. As promised. What more can you want.
# 5
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Exactly what I needed. Now able to add storage box and still pull tow Dolly.
I contacted etrailer and spoke with Terri N. I had previously purchased on 3 separate occasions another brand of dual hitch (none from etrailer) which all bent when pulling my 2018 Jeep Wrangler behind our 2014 Fleetwood Bounder 35K Motorhome with a Hollywood bike frame carrying 2 Rad Power e-bikes. Apparently, we were using the wrong adaptor. She was VERY helpful with information, discouraging more than 1 hitch adaptor and recommended the 10,000 pound dual hitch receiver with a 2-4 in drop/rise. So far, it seems to be working fine. My only concern is that there is not enough clearance to fold up my Blue Ox tow bar while connected to the hitch. Also, the front of the Jeep bumper is VERY close to the bike rack upon turning the Motorhome.
# 6
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
This hitch adapter is just what the doctor ordered!! It met my needs in making it possible to "adapt" a rear cargo carrier to our 2007 Ford Explorer. This gives us extra capacity to transport wedding-related items from our home in Columbus, OH to Battle Creek, MI without having to rent a trailer or use two vehicles. Not only that, etrailer.com "performed a miracle" in getting this delivered in 2 days at no extra cost!! GREAT JOB in supplying what we needed, when we needed it, at a price we could afford.
Solidly made. Wish all of these would come with optional locking pins and clamps to minimize movement as I use mine primarily for a bike rack with very nice bikes aboard.
# 7
Curt Extender for 2" Hitch Receivers -18" Long
Made in China!!! NOT HAPPY ABOUT THAT..........
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
# 8
Hitch Extender for 2" Trailer Hitches - 8" Long
I needed this extension for a bike carrier on my Explorer, now I don't have to remove a peddle. It works great.
Just received my 80307 Hitch Extender for 2" Trailer Hitches - 8" Long. My newly upsized spare tire had been preventing the use of my hitch rack. Was very pleased with the etrailer service and the ease of using the website. The excellent descriptions, photos, and even videos really help shopping for these types of specialty parts. Shipping went well and expediently. I trial fit the extension with my hitch rack today, and the photos are attached. It fit well and did the trick. I drove around and heard no rattles from it at all.
# 9
Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
I love the product not just for the obvious reasons such as it’s extremely durable and well made for safety but specifically for length of the arm. The arm length is just long enough to clear my hitch rack walls, which allowed me to plug in my bike rack. I would certainly recommend this product to others. I haven’t seen any marketing for this specific use case so have at it.
I’ve been using this product every day for over a year at this point. On the back of our Class C RV it supports a bike rack carrying 3 bikes (one is a heavy eBike) and a Roadmaster tow bar, which connects to a Jeep Wrangler when we travel. It provides the need height for the bike rack and the drop needed for the tow bar to be level with front of the Jeep. We are full time RVers, so it gets a lot of use. It has worked perfectly and remains in new condition.
# 10
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You
I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.
# 11
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
Does exactly what I need it to. Have '06 explorer pulling a motor cycle trailer - have to keep it level and this did the trick
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
# 12
Hitch Extender For 2" Trailer Hitch Receiver 7"
I needed my bike to clear my bumper on a front hitch and this did the trick. This extender is hollow so I was able to use anti rattle/ lock before adding bike rack.
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
# 13
Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
Dont know what say, they are going to build this truck in april!! Thanks for quick service,cant wait to install.Thanks
product worked out just fine / GREAT!!!
# 14
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
Beefy. I have no doubts of the capacity of either side of this hitch adapter, there's plenty of weld to hold it all together. Very few options will provide minimal drop (for an off-road trailer) and minimal rise on the other side for an additional bike rack or cargo carrier. Jeeps are tough since you need to be able to open the gate. This one clears no problem. My spare is up on a slant back carrier, but I think the stock spare should clear as well. Get you a "Trimax THC200 Universal Anti-Rattle Clamp Fits 2" Hitch" and this thing is solid as stone.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 15
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
This hitch worked well on my Kona electric. Etrailer provides outstanding service. Will definitely purchase from this quality company again.
Excellent product, very sturdy. We have been using them on our trailers for years.
# 16
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
This adapter allows us to use a bike rack we have across all our cars. It is perfect for light duty applications, easy to use and it can be stored in the trunk until you need it. I would definitely recommend it.
I was concerned that the adapter might not fit on my 2023 Toyota Venza, LE, but it fits just fine. So, the notice that the adapter will not fit a class one hitch does not apply to the Venza, even though the Venza specifications indicates it is a class one hitch.
# 17
Brophy Hitch Extender with Step - 2" Hitches - 18" Long - 6-1/2" x 17" Platform
I recently bought a truck tent that sets up over the open tailgate. I have a bump/step that became totally useless as it was covered by the tailgate. Then I came across the ST18 extension. Now after the tent is set up, I install the extension then the bump/step itself and your able to step up and into the tent with no problems, and it's also extremely stable!
This is exactly what I needed. Being a long time RV owner, I have purchased many items from E-trailer and have never had a bad experience. Great service, product exactly as described.
# 18
Buyers Products 3" to 2" Receiver Tube Adapter
Unfortunately this receiver adapter did not fit my Ford F250 3" hitch, way too tight. Worked with Arthur from e-trailer to obtain a return/refund. After looking at reviews, I see many other folks had the same issue. If I were e-trailer I would pull this item from my product offering.
When I went to use this my bike rack would not fit in the 2" receiver because it was poorly made. Unfortunately it was well past etrailers 60 day return policy so they told me they would not help me. I contacted buyers myself and they were happy to help me and took the old one back and shipped me a new one that works great. If buyers did it for me, they certainly would have done it for etrailer but etrailer couldn't be bothered with it. I will buy buyers products again but will not buy anything from etrailer anymore. They also told me I would need to buy a whole new $XXX base for my bw companion hitch because the parts were not available. A quick call to bw and my. $XX parts were on their way. Again,poor service from etrailer. Back to local shops for me.
# 19
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Works great! I use it on my motorhome to carry my bikes with a Rocky Mounts Carrier and flat tow my car with my Blue Ox system. It places the bike carrier at an optimal height over the front of the car but my may be different for other bike carriers. Very sturdy and seems to be quality all around.
# 20
MaxxTow Hitch Extender with Step - 2" Hitches - 13-1/2" Long - 7" x 14" Platform
Affordable front step (wide platform) to service lifted vechicles and will provide distance between exterior mounted spare tire and hitch rack. Suggestion: design the step to fold up or down for a full time install.
Works as advertised. I use it full time. I painted the step surface with Herculon bed liner for a rubberized non slip surface, that works even when covered with frost or mud. Only down side, is that it reduces the tongue weight of the truck hitch by 50%. I typically use it to haul a 2 horse trailer. If it ever gets damaged, I will immediately by a replacement.
What our customers are saying:
"Very broad selection and outstanding service."