Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
You need item ETBC7 ($129.19) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C51170-C51322
Trailer Brake Controller Specs:
Features:
...trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C51170-C51322
Trailer Brake Controller Specs:
Features:
...trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C51170-C51515
Trailer Brake Controller Specs:
Features:
...trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall Control knob...
Installation Notes:
You need item ETBC7 ($129.19) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: C24VV-C51322
Trailer Brake Controller Specs:
Features:
...included Plug-in, vehicle-specific brake control adapter (sold separately) can be used to reduce installation time on certain vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C24VV-C51322
Trailer Brake Controller Specs:
Features:
...included Plug-in, vehicle-specific brake control adapter (sold separately) can be used to reduce installation time on certain vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Trailer Brake Controller Specs:
Features:
...Weatherproof casing protects the unit from the elements Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Made in the USA Specs: Application: trailers with up to 3...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
...Weatherproof casing protects the unit from the elements Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Made in the USA Specs: Application: trailers with up to 3...
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
...Weatherproof casing protects the unit from the elements Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems Made in the USA Specs: Application: trailers with up to 3...
Installation Notes:
You need item ETBC7L ($114.65) to install your controller.
More Information >Trailer Brake Controller Specs:
Features:
...2" tall Length of hardwire pigtail: 30" Mounting: 360 degrees vertically Limited lifetime warranty Gain Power Adjustment You can adjust the gain (also known as output) with the thumbwheel...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...2" tall Length of hardwire pigtail: 30" Mounting: 360 degrees vertically Limited lifetime warranty Gain Power Adjustment You can adjust the gain (also known as output) with the thumbwheel...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Trailer Brake Controller Specs:
Features:
...2" tall Length of hardwire pigtail: 30" Mounting: 360 degrees vertically Limited lifetime warranty Gain Power Adjustment You can adjust the gain (also known as output) with the thumbwheel...
Installation Notes:
You need item ETBC7 ($129.19) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: C84VV-C51322
Trailer Brake Controller Specs:
Features:
...brake control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with low-volt, PWM, ABS...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C84VV-C51322
Trailer Brake Controller Specs:
Features:
...brake control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with low-volt, PWM, ABS...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: C74VV-C51322
Trailer Brake Controller Specs:
Features:
...control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with low-volt, PWM, ABS, cruise...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Code: C74VV-C51322
Trailer Brake Controller Specs:
Features:
...control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with low-volt, PWM, ABS, cruise...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: HA81760-HA81783-HBC
Trailer Brake Controller Specs:
Features:
...separately) available for select vehicles to reduce installation time Made in the USA Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electric or electric-over-hydraulic...
Installation Notes:
You will also need item 37185 ($55.58) to complete your wiring.
The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.
More Information >Code: HA81760-HA81783-HBC
Trailer Brake Controller Specs:
Features:
...separately) available for select vehicles to reduce installation time Made in the USA Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electric or electric-over-hydraulic...
Installation Notes:
The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.
More Information >Trailer Brake Controller Specs:
Features:
...separately) available for select vehicles to reduce installation time Made in the USA Specs: Application: trailers with up to 3 axles (6 brake assemblies) Compatible with electric or electric-over-hydraulic...
Installation Notes:
You need item ETBC7 ($129.19) to install your controller.
You may also need a 4-Flat connector to complete your wiring.
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your…
view full answer...I&…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...Filter Products (42)