bing tracking image
  1. Wiring
  2. Deka
  3. Wire
  4. Single Wire
  5. 10 Gauge
10 Gauge Wire - Blue Primary - Per Foot
Deka

10 Gauge Wire - Blue Primary - Per Foot

Part Number: 10-1-1
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$1.83
Wiring
Deka Wire - 10-1-1
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Great Prices for the best wiring from Deka. 10 Gauge Wire - Blue Primary - Per Foot part number 10-1-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (103)
  • Q & A (0)
  • Photos

Deka Wiring - 10-1-1

Highlights

  • Standard Copper Wire: 10-gauge wire for reliable brake and electrical connections
  • Resilient GPT Insulation: Resistant to acids, gasoline, and industrial solvents
  • SAE J1128 Compliant: Suitable for original equipment and replacement wiring needs
  • Temperature & Voltage: Handles up to 50 volts and 176°F, ideal for trailers
  • Versatile Application: Perfect for connecting electric brakes on trailers
  • Custom Length Options: Order by the foot to avoid unnecessary waste

Features to know about

Effortless Wiring Customization: Cut-to-Length 10 Gauge Primary Wire

If you're tired of purchasing whole rolls of wire when you only need a specific length, this product is perfect for you. The 10 Gauge Primary Wire by Deka is sold by the foot, allowing you to order exactly what you need for your project—no excess, no waste. This feature is particularly valuable for projects like rewiring trailers or adding auxiliary circuits where precision is key.

Reliable Power Transmission for Trailer Brakes: High-Quality Copper Wire

Ensure your trailer brakes function flawlessly with Deka's 10 Gauge Primary Wire. This wire is often used for wiring electric brakes on trailers, offering a reliable connection from brake controllers to trailer brakes. Rewiring a 16-foot dual axle trailer? This wire delivers the necessary power without overheating, thanks to its robust copper construction that supports up to 50 volts.

Ultimate Resistance Against Harsh Conditions: Thermo-Plastic Insulation

In the automotive and trailer industry, durability is crucial. Deka addresses this need with its Thermo-Plastic (GPT) Insulation, making the wire highly resistant to acids, gasoline, oil, grease, and most industrial solvents. Whether you're running brake signals, powering auxiliary circuits or installing trailer lighting, this wire withstands harsh environments and meets SAE J1128 Specifications.

Perfect for Heavy Loads: Keep Batteries Charged with 10 AWG

For heavy-duty applications like charging a trailer battery, the 10 AWG wire is your go-to solution. This wire ensures that even with large loads and long runs, your power needs are efficiently met. Connect your vehicle’s 7-way accessory circuit with confidence, knowing it will maintain battery voltage without over-burdening your vehicle's charging system.

Adaptable for Versatile Projects: From Trailer Lighting to Power Circuits

Whether you're setting up trailer lighting, installing a new battery charge line, or upgrading your electric brake system, this wire adapts to your needs. It's the perfect choice for multi-use scenarios, providing a dependable solution for a myriad of electrical projects around automotive environments.

Peace of Mind with Trusted Quality: Standout Reviews Speak Volumes

Customers consistently praise this wire for its quality and performance. From being delighted with its resilience in harsh conditions to appreciating the exact lengths they receive, users can't help but recommend it. Experience why so many rely on this wire as their first choice for trailer and automotive projects.

10-1-1 10 Gauge Primary Wire - Blue - per Foot




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

103 reviews

by:



by:



by:



by:

only sent 27 foot why no spool



by:

Works fine.



by:

Wire is of high quality



by:

Exccellant value as sold by the foot instead of by the roll.



by:

The products were exactly as advertised and they even expedited my shipping. Great customer service.



by:

Was larger gauge than I needed but worked just fine. This 10 gauge wire is blue but my stock wiring was about 14 gauge but since the used a circuit breaker to cross connect it was not a problem.



by:

Nice piece of wire



by:

Excellent brake controller. etrailer was prompt in shipping and service outstanding. Would definitely buy from etrailer again.

Gerald profile picture

Gerald

12/9/2018

This brake controller is working great. Would recommend it Easily adjustable for driving conditions



by:

As described. Customer service was excellent as always!



by:

Pay attention everyone unlike me. It is by foot and I didn’t order right. My fault



by:

Fast delivery - Ordered on 9/29/17 - Received on 10/4/17
Excellent heavy gauge wire!
NOTE for etrailer managers. I am a technical person by nature and speaking only for myself, when I buy and pay for a specific amount of something, I expect to get that amount. I'm not pinching pennies with you here; BUT, I bought 30' of this wire and when I received it, I measured it twice and came up with 29' 9". Most places I've dealt with in the past where I buy wire, angle iron, etc.. would give you a couple of inches or more than you ordered versus a couple of inches shorter than what was ordered. Very stingy in my opinion and not fair to your customers.



by:

Ordered a pair of Dexter electric brake kits for my trailer. Everything arrived within a few (3) days in good shape. Installed on the trailer, everything works as advertised. I have ordered from etrailer several times over the past few years. Always great service and prices. Customer service and tech assist is especially good with these folks. I would send pictures but the trailer is out working.



by:

It took a while to get to me since several items in the order were back ordered, but someone from etrailer regularly communicated the status. All items arrived in good condition, but I haven’t had time to install.



by:

Good price, and just what I needed for carrying the heavier loads needed for charging the trailers on board battery, and running the refrigerator/freezer.



by:

Couldn't be happier. Bought a couple of 4 to 7 way adapters, some 10 gauge wire and a couple of 40a breakers. Recommendations from etrailer were thorough and well done.
All installed on both vehicles ... both working just great.



by:

The wiring harness set is flawless and the installation went smooth, even for this less than electrically inclined guy. A couple hours or work and I was on the road towing with confidence



by:

The wire itself seems okay, although the packaging wasn't great. Ordered 75 feet of wire along with a coupler. The wire was coiled in the bottom of the box, with the coupler sitting on top of it in direct contact. I noticed some nicks in the wire insulation as a result of the coupler edges hitting it during shipping.

eTrailer did a great job of shipping quickly! Order packaging needs some serious attention.



by:

This served its purpose for installing a trailer battery charge line. It was nice that I could order a specific length from retailer since I didn't need a whole roll.



by:

I have not performed my installation yet but this is to compliment you on your order processing and shipping. This is my second order and everything was well packaged and delivered right on time. I recommend your site to people all the time. Thanks!



by:

The wire was perfect for the application (electric trailer brakes). The sales person, William, who helped me, was most helpful.



by:

Order accurately filled, (I even called back to add some items). The order even came more quickly than I expected. Quality of the parts appears to be excellent!

Thank you!

Michael profile picture

Michael

6/28/2021

Working fine. No problems.



by:

Wire was just what I needed to add the battery charger wiring to the 6 pin receptacle for the TOAD vehicle.


25
103
Show More Reviews

See what our Experts say about this Deka Wiring

  • Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
    Since Demco uses 3,500 drum brake assemblies part # DMSB24429M and # DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part # AKEBRK-35L-SA for the left hand side and # AKEBRK-35R-SA for the right hand side. To wire these up you'd just need 10 gauge wire like the part # 10-1-1 which we sell by the foot. Then to add a 7-way the easiest way to do that is with the 7-way junction box # e99011.
    view full answer...
  • Recommended Parts To Add Solar, Battery, Generator, and Shore Power to Enclosed Cargo Trailer
    I'd be more than happy to help you out! You're going to need a complete setup like what you find on an RV for what you're needing to do. This is based off of a battery bank but the power will be provided by the various methods you mentioned. Here are the parts I recommend using and then you can find the explanations for them below: Control Center - # PD4135K Pure Sine Wave Inverter - # FIVBDP10A Transfer Switch - # 34264403 30 Amp RV Power Inlet - # A10-30INBKVP RV Power Cord Adapter...
    view full answer...
  • Parts Needed to Add Brakes to 2002 Pace American Cargo Sport
    P15 isn't a way to identify what axle you have but if you can find the label/sticker on it that lists it's capacity or get me diameter of it I can see what parts you'd need to add brakes to it.
    view full answer...
    Image 1 for Image 2 for
  • Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
    Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt connector # DW05745-10 you'll be able to protect your electrical connections and shouldn't have a problem. To add brakes you'll need to check the axle/spindle to see if you have a brake mounting flange. If you don't then you'll have to buy new axles...
    view full answer...
  • Can Brakes be Added to 3,500 Pound Dexter Trailer Axle
    Yes, brakes can be added to your trailer and I've linked an article to help with the parts you'll need. The first thing you'll need is the brake mounting flanges welded to the axle, like you mentioned. The correct flange is # 4-35 however these need to be welded by a qualified welder because the mounting flange must be welded square and concentric. This is generally done using a jig at a trailer shop. I've linked our selection of hub and drum assemblies for 3,500 pound axles. You'll...
    view full answer...
    Image 1 for
  • Recommended 7-Way Wiring And Wireless Brake Controller For A 2022 Toyota Highlander
    Hi Vijay, Since you're wanting to go with a wireless brake controller you can use the Curt Trailer Connector Adapter # C57672 you were looking at and just cap off both the yellow and blue wires with some electrical tape. These can be saved for use later on if you want a hardwired brake controller or have a boat trailer with a reverse lock out solenoid. You'll need to pick up some 10awg wire # 10-1-1 to run from the black wire up to the battery and a 40 amp circuit breaker # 9510 inline...
    view full answer...
  • Brakes for Second Axle on Horse Trailer
    Hey Robert! Ideally you're going to get 12V all the way back to the brakes but that typically doesn't happen. What exactly is the issue? Are they not working at all? At 8-9V I would expect them to have most of their functionality to a point you probably wouldn't notice. Are you saying you have 11V at the brake assemblies when you use the jumper pack? Do you have full 12V coming off of your vehicle when you use the manual override on your brake controller? Some typical issues with low voltage...
    view full answer...
  • Parts Needed to Add Brakes to 3,500 lb Trailer Axle
    Since we know you have 3,500 lb axles we can pretty easily pick out the correct parts you'd need to add brakes to your trailer. You'd need new hubs that have integrated drums like with the part # AKHD-545-35-EZ-K which have the very common 5 on 4-1/2 inch bolt pattern. Then you'd need to add matching brake assemblies with the part # AKEBRK-35-SA and you'd be set aside from 10 gauge wiring like part # 10-1-1 which we offer that you'd want to wire up the assemblies with. This is sold by the foot.
    view full answer...
  • Which Axle Should Electric Brakes be Installed on with Tandem Axle Trailer
    When installing electric brake assemblies on just one axle of a tandem axle trailer, you will essentially want to choose the axle that is going to be seeing more weight. Typically on utility trailers, most of the weight will be in front of the axles so the brake assemblies will be installed on the front axle. For boat trailers, where the motors are at the rear, you will usually see brakes on the rear axle. I have attached a great article that details everything you will need to install...
    view full answer...
    Image 1 for
  • Do Electric Brakes Need to Share Ground Wire?
    To wire your electric brakes you will want to run 10 gauge wire # 10-1-1 to one of the brakes and run it to the other brake, using butt connectors like # 05732-2 to connect them. The grounds will not be spliced, each brake assembly should have its own ground; please see the accompanying photo which is from our help article on adding electric drum brakes which I have linked for you.
    view full answer...
    Image 1 for
  • Troubleshooting Voltage Drop to Trailer Brake Assemblies
    I believe you almost solved the problem when you swapped the wiring, but in reality you needed to use 10 gauge wire like part # 10-1-1 (sold by the foot). You are experiencing a voltage drop due to the long distance of wire that's not thick enough. Replacing all of the wiring on the power circuit and the ground circuit will allow the brakes to have the amount of voltage to apply. I'd run all of the ground wires back to to the main ground harness of the trailer wiring as well. It's also...
    view full answer...
  • Troubleshooting Voltage Drop from 12V to 7V When Trailer Brakes are Installed
    It sounds like you may have a poor ground connection which is causing low voltage when you are testing. Sometimes it may look like we have a really good ground point but some paint or debris is getting in the way and causing issues. What I recommend doing is taking your trailer brake ground wires and running them up to your main trailer ground location. You will likely need more 10 Gauge Wire # 10-1-1 and I recommend using Heat Shrink Butt Connectors # DW05745-5 because they hold up much...
    view full answer...
    Image 1 for
  • Parts Needed to Replace 12" Disc Brakes with Electric Drum Brakes
    Hey Eric! Are you wanting to change from disc brakes to electric hub and drums, or are you just wanting to replace the rotors themselves? Traditionally 10" brakes are only compatible with up to 15" wheels but if yours have been working just fine then I can help you out with replacements. The 10" Dexter Electric Trailer Brakes # 23-26-27 will work if you have 3,500 lb axles and a square 4-bolt brake mounting flange (2-7/8" apart on center) but you'll also need 2 of the 10" Hub and Drum...
    view full answer...
  • Curt Echo Not Working Plugged Into 2016 Ford F-150
    Hi Brendan, The issue is with the wiring on your 2016 Ford F-150, as the 12 volt power is sometimes off on the 7-way if you're not moving, as you can see from the cut out of the instructions I added for the Curt Echo # C51180. So the 12 volt power needs to be routed directly to the positive terminal on your battery with 10 gauge wire # 10-1-1 and 30 amp circuit breaker # PK54530.
    view full answer...
  • How To Add Power Wire for MaxxFan Deluxe Vent with Fan
    The MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-07500K requires 12V power at 5 amp draw. Since you are installing in a location that doesn't have power wires run, you will need to run a power wire like # 12-1-1 or # 10-1-1 (sold by the foot) to your battery or to another 12V power source that can handle that draw. There is a good chance the bathroom fan or a light could be a good tie in point as long as you tie in prior to a switch. You...
    view full answer...
  • Activating 12 Volt Accessory Circuit of 7-Way on 2023 Hyundai Santa Fe
    Hey Danny, we can definitely help but we don't have just a kit for what you need. What you'd instead need is to run a 10 gauge wire like part # 10-1-1 through a breaker like the part # 9510 from the positive post of your battery to the 12 volt accessory pin of the 7-way.
    view full answer...
  • Brake Controller Installed in 2021 Chevy Silverado Z71 Trail Boss Not Powering Up
    Assuming that you've found the correct connector for the # 3064-P brake control harness which is located under the dash to the left of the steering column, I'd wager than you have a fuse missing in the power distribution box in the engine compartment on the passenger side. Check fuse location # 84, and make sure that there's a fuse installed there. If the fuse is missing or blown, you can obtain a replacement from your local auto parts store.
    view full answer...
    Image 1 for
  • Brake Controller and Install Wiring Needed for 2014 Jeep Wrangler Unlimited
    Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle. First let's start with a brake controller. I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to set up. Next, for a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will...
    view full answer...
  • Troubleshooting Brakes Staying on When Connected to 7-Way on 2012 Nissan Pathfinder
    Thank you for all of the details. I'm glad to hear that all of your lighting functions are working properly. That takes quite a bit of troubleshooting out of the equation. The red wire that was referenced looks to carry the reverse light function. If your trailer has reverse lights then you definitely want to make that connection. For the answer page you are referencing the customer was looking to use the Adapter # 37185 along with the T-One # 118266 which is the equivalent of the Curt...
    view full answer...
    Image 1 for Image 2 for
  • Using 7-Way 12V Power Circuit to Power Trailer LED Interior Lights
    Yes, you certainly can use the 12V auxiliary power circuit on your 7-way wiring setup to power trailer lights. If you refer to the linked photo of a vehicle 7-way connector you will note that the 12V power circuit is carried on the contact at the 1:00 position as you look at the 7-way socket. This is noted by the yellow arrow. An easy way to access this 12V power circuit is to tap into it by using a junction box like # HS381-9000. This box gives you a handy place to install a ring terminal...
    view full answer...
    Image 1 for
  • Parts Needed to Add Electric Brakes to a Magic Tilt TALS 2244 Trailer
    Hey Jeff, thanks for reaching out! From the information you gave me, I'm pretty sure you have 3.5K axles on your trailer so you'll need the following: - etrailer Electric Trailer Brakes - Self-Adjusting # AKEBRK-35-SA (1 set per axle) - Galvanized Trailer Hub and Drum Assembly # AKHD-545-35-G-K (2 per axle) - Trailer Wiring 7-Way Upgrade Kit # ET7WK - Breakaway Battery Kit # 3802346 - 10 Gauge Wire # 10-1-1 (to run from the coupler and connect the brake assemblies together) - Heat...
    view full answer...
  • How to Charge a Trailer Battery Through a 7-Way Connector
    You can put a maintenance charge on your trailer battery with the 12 volt accessory circuit of the 7-way. The 1:00 position of your 7-way carries this circuit. You would just need to run a length of 10 gauge wire like part # 10-1-1 (sold by the foot), from this pin to the positive terminal of the battery. You should note that this won't charge a dead battery, but it will keep the battery topped off when you are towing the trailer.
    view full answer...
  • How to Provide a 25-40 Amp Power Source for the HydraStar Actuator HBA16
    Here is what you will want to do. Since your 12 volt accessory circuit is only rated for 20 amps you are going to want to run a 10 gauge wire like the part # 10-1-1 (sold by the foot) from the positive battery post of your vehicle through a 40 amp circuit breaker like part # 9510 to the 12 volt accessory circuit of your truck so that you would have a circuit rated high enough for the # HBA16.
    view full answer...
    Image 1 for
  • Installing a Trailer Brake Controller on a 2012 Dodge Caravan with Tow Package
    I spoke with a colleague who worked at Chrysler and he stated that they do not put the trailer hitch and 7-Way wiring on the Grand Caravan at the factory. That is something that the dealer installs. In any event here is what you will need to do. The brake controller will need to be hardwired into the vehicle. The white wire on the brake controller will need to get connected directly to the negative terminal on the vehicle battery. The black wire will need to connect to a 30 amp circuit...
    view full answer...


< Previous
123. . .105



Do you have a question about this Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Victoria B
Expert Research:
Victoria B
Employee Andrew L
Video Edited:
Andrew L
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Sabrina W
Updated by:
Sabrina W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<