Hi Keith, welcome back! It looks like you went ahead and ordered the following:
-Demco Classic Base Plate Kit - Fixed Arms # DM9518302
-Roadmaster Falcon 5250 Tow Bar Adapter Brackets for Demco Classic Base Plates # DM9523023
-Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord # RM-15267
-Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles - (2) 20-Amp ATC/ATO Fuses # RM76514
-Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles... view full answer...
Hey Mark, thanks for reaching out!
You'll need to go with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76023 for your 2023 GMC Acadia AT4.
We actually had the chance to install this hitch on that exact vehicle so I'm attaching the installation video and a photo of the finished install for your reference.
If you let me know what you plan on using the hitch for I'd be more than happy to make additional recommendations if necessary. view full answer...
Hey Dominic. Since you have the AT4 model of the 2021 GMC Acadia you'll need the Draw-Tite Hitch item # 76023. This hitch is custom fit for your Acadia and bolts to it with included hardware. It's going to mount behind your rear bumper cover and be completely concealed when you cover it with the rear trim piece.
The Draw-Tite Hitch item # 76023 is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight.
What do you plan on using your... view full answer...
Hello again, Joe!
If the 2025 GMC Acadia you are looking at has the factory towing package, from what I could find, there will be 4 wires wrapped up in a bunch of cables in a harness on the leftmost side of the driver's footwell. Remove the black tape and you find the 4 wires. It sounded like it was a pain to find it, so patience will be needed. I do have to admit that I couldn't find whether or not anything needed to be activated for the brake controller to function properly, so that... view full answer...
Hey Dennis! The Acadia and Traverse do share a lot, but the coil springs are different which means the # AL99PD will not fit your 2025 Traverse High Country. You may be able to use the universal springs like # AL60909 but you will need to measure to find the right fit.
First, unload your vehicle to make sure it's at normal ride height. Then, measure the inside height of your coil spring, which will be from the upper spring seat to the lower spring seat. Lastly, measure the inside diameter... view full answer...
Hey Christopher! I can definitely point you in the right direction. What you need is the Draw-Tite Max-Frame Trailer Hitch Receiver # 76023. This is confirmed to fit your 2020 GMC Acadia AT4. Do you plan on towing? If you do, you will also need wiring # C56325 and a ball mount like # e66PR.
If you have any other questions don't hesitate to reply below. view full answer...
Hey Mike. For a 5th wheel trailer that long, I recommend using two of the MORryde I-Beam Mounted Stabilizer item # MR96RV. Mounting one of these in the front a few feet back from your landing gear and then one in the back is going to take care of any swaying or rocking feeling inside your trailer.
The MORryde item # MR96RV requires exposed I-beams to mount and 12" or more inches of clearance from the bottom of the I-beam to the ground.
What year and model 5th wheel trailer do you have? view full answer...
Hello Robert, thanks for reaching out. The Andersen Weight Distribution Hitch can indeed be used with your 2025 GMC Acadia towing a 5,000 lb trailer. For that, you can use the following:
- Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 14K GTW, 1.4K TW # AN53VR view full answer...
Hey Phillip, so to pick between the two tow defenders comes down to which style of Roadmaster base plate kit you have installed on your towed vehicle. If there's a crossbar between the arms of the tow bar then you need the part # RM-4700. If there is no crossbar then you'd instead want the part # RM-4750. view full answer...
Hello Ronald,
No, the SLT and AT4 are different submodels of the 2023 GMC Acadia. I can verify for you that there are running board fits for your 2023 GMC Acadia AT4, though, from Aries. I checked with the manufacturer to confirm this for you, and what you can use are either of the following
- AeroTread Running Boards w/ Custom Installation Kit - Black Stainless # AA48ZB
- AeroTread Running Boards w/ Custom Installation Kit - Polished Stainless # AA43ZB view full answer...
Hi John,
So while there are replacements, Lippert doesn't sell the individual arms for the awnings, they only sell the complete kit with the wall-mounted bracket, outer arm, inner arm, and pitch arm all in one. I know that's not what you wanted but I at least wanted to give you the option. The 78 inch long assembly is available in either white or black:
- White: Replacement Support Arm Assembly for Solera XL RV Awnings - 78" Long # LC54VR
- Black: Replacement Support Arm Assembly for... view full answer...
Hey Juliet great question! So if you already have the OEM plug then you can just use the Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors # 30955, which just plugs into your OEM harness and replaces your 4-pole/7-way connector.
The Reese Multi-Plug Wiring Harness for Factory Tow Package # 74682 would be great if you towed two different trailers, one with brakes and one without. Since it sounds like your trailer has brakes, I'd use # 30955 instead.
What kind of trailer... view full answer...
Hey Alan, yes we have great brake controllers for your 2024 GMC Acadia with the factory 7-way like the Redarc Tow Pro Liberty part # RED62NR. This will wire to the pigtail your Acadia has under the dash and you'd be set. I really like this controller because of how well it performs and because it only puts a small knob on your dash. view full answer...
Hello Ryan,
It all depends on if your 2012 GMC Acadia came with the factory tow package or not. The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384 is for if the vehicle DID come with the factory tow package. If you looked under the vehicle and saw the correct connectors then the # C55384 should work great.
If your 2012 GMC Acadia did NOT come with the factory tow package then you will actually need the T-One Vehicle Wiring Harness... view full answer...
Hi there Daniel; thanks for writing in and we can get your 2016 GMC Acadia set up with the complete towing package, including the 7-way, helper springs, and weight distribution hitch. I'll go ahead and list out the parts you need, as you're already on the right track with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528.
- T-One Vehicle Wiring Harness - 7-Way Trailer Connector # 118271
- 7-Way Mounting Bracket # PK12711U
- Redarc Tow-Pro Liberty Brake Controller # RED24FR
- Plug-and-Play... view full answer...
Hey Kieran. The 2023 GMC Acadia's all come with the necessary wiring beneath your rear bumper. As far as wiring is concerned, the only difference in yours and one with the towing package is yours doesn't have the 4-way or 7-way connector. Here are the parts you will need to add a wiring harness to your Acadia:
4-Way Connector - Curt T-Connector Vehicle Wiring Harness item # C56325
7-Way Connector - Curt T-Connector Vehicle Wiring Harness item # C56326
I have linked a couple of installation... view full answer...
Good to hear from you again, Harley!
You will need to place your 2019 GMC Acadia into neutral when towing, but according to page 361 of your owner's manual it looks like you'll need to lift up the boot around the shifter and press the "manual release button" to do this.
I highly recommend referring to the instructions in your copy of the owner's manual to make sure you get your vehicle set up correctly.
For a complete flat towing setup you will need a base plate kit, tow bar, safety... view full answer...
Hey Keith! We don't work with the OEM's and there's not enough information online for me to tell you what GM part you need, or the difference between the two if that makes sense. I can tell you that I checked with Curt and their T-Connector Vehicle Wiring Harness item # C76RV fits all models of the 2024 GMC Acadia with the exception of the Limited model. The Elevation model is not considered the Limited so item # C76RV is exactly what you need. view full answer...
Go To Results