Are There Replacement Arms For Solera XL Awning
Updated 12/22/2025 | Published 10/13/2024
Products Featured in This Question
Question:
Hello, I have a lippert solera XL awning. I need the top support arm not the pitch support arm. It is the arm that is above the pitch arm that the shock goes to. The arm measures 57 inches.
asked by: John D
Expert Reply:
Hi John,
So while there are replacements, Lippert doesn't sell the individual arms for the awnings, they only sell the complete kit with the wall-mounted bracket, outer arm, inner arm, and pitch arm all in one. I know that's not what you wanted but I at least wanted to give you the option. The 78 inch long assembly is available in either white or black:
- White: Replacement Support Arm Assembly for Solera XL RV Awnings - 78" Long # LC54VR
- Black: Replacement Support Arm Assembly for Solera XL RV Awnings - 78" Long # LC98ED
Product Page this Question was Asked From
Replacement Support Arm Assembly for Solera XL RV Awnings - 78" Long - White - Qty 1
- Accessories and Parts
- RV Awnings
- Arms
- 78 Inch Long
- Standard Head
- Support Arms
- Solera Replacement
- White
- Lippert
more information >
Continue Researching
- Shop: Replacement Support Arm Assembly for Solera 78" XL Awnings - Black
- Shop: Replacement Support Arm Assembly for Solera XL RV Awnings - 78" Long - White - Qty 1
- Shop: Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs - 58" Long - Black
- Q&A: How to Tell if 3,500 Pound Dexter Torflex Axles Need to be Replaced
- Q&A: Complete Replacement Awning for 2015 Keystone Cougar XLite 28SGS
- Q&A: Parts Needed to Install Solera/Lippert XL Awning
- Q&A: How Do I Choose The Correct Awning For My Stock Trailer?
- Q&A: Replacement Furrion Range Ignitor C-FSRE21SA-020
- Q&A: How to Determine Correct Bearings and Seals for 3,000 lb Axle
- Q&A: Nut to Match Wheel Stud # 007-112-00
- Article: How to Install an RV Awning From Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Jesse M.
12/22/2025
Hey John, did the full 78-inch Solera support arm assembly end up working for your awning? Knowing how it fit could help others trying to replace just the upper arm on their setup.