Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’ve got a heavy trailer, keeping everything level is the key to confident towing. The Curt MV Weight Distribution System spreads the load evenly between your vehicle and trailer axles, preventing that rear-end sag and sway that can make driving stressful. Rated for 14,000 lbs gross towing weight and tongue weights from 1,000 to 1,400 lbs, it’s built for heavier travel or equipment trailers. Once it’s dialed in, you get a balanced, steady ride that feels safer and more predictable mile after mile.
A lot of cheaper setups use cast bars, but these round spring bars are forged from solid steel for superior strength and impact resistance. Forging makes the metal denser and more resilient, so the bars hold alignment and resist bending even under full load. That extra durability pays off when you’re hauling heavier loads over rough pavement—everything stays straight and solid, and the ride feels smooth instead of bouncy.
Fine-tuning the setup is easy with the Curt MV’s traditional washer-style head and chain lift system. You can adjust tilt by adding or removing washers on the spacer rivet and tweak spring bar tension by choosing different chain links. Once you have the right combination, the system keeps your trailer and tow vehicle level without complicated tools or guesswork. It’s a straightforward design that works every time.
You don’t need to disassemble anything to keep this setup running smoothly. The head assembly has two built-in grease zerks on the spring bar shafts, so you can hit both with a grease gun quickly and get back on the road. That simple bit of maintenance keeps movement quiet and prevents wear at the connection points—no popping or grinding when you take corners or pull into camp.
Everything you need for setup is in the box—adjustable shank, head assembly, lift brackets, lift bar, pin and clip, and all hardware. Just add a hitch ball with a 1-1/4" diameter shank to match your trailer coupler and you’re set. It fits 2" x 2" trailer hitch receivers rated for weight distribution, with a maximum rise of 6" and drop of 2-1/2". It’s a heavy-duty, reliable kit that does exactly what it’s supposed to—distribute weight, improve control, and make towing feel stable and easy.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Since we bought a new travel trailer that weighs twice as much as our old one, it occurred to me that our old weight distribution hitch might be too light. I ordered this 14,000 lb rated hitch and it truly is stout. It arrived in a couple of days, securely packed with great instructions on its use. This hitch is similar in design to our old one, except that its much heavier steel and this hitch has a height adjustment for different height trucks/trailers. The price was awesome. I really couldn't be happier.
Purchased a weight distribution kit and it was shipped and delivered within a couple days. Customer Service was excellent and their products are of good quality. I really like their website as they carry a lot of useful products. I have and will continue to recommend etrailer.
For the amount of money these are, I had to use shims to keep the ball portion from wobbling in the drop down side of the hitch very disappointed and annoying every time I have to slide the ball around
Everything is as described. Fast delivery and packaged well.Will use etrailer again. Thanks
The Curt weight distribution system with round drop down spring bar worked to solve trailer frame clearance issue I had with old style sprig bar.
Fair price works well my 13.5 k trailer doesn't sag at all might want to consider a stabilizer/ sway control I notice on a windy highway I get alittle drift my trailer is 39 feet long wich may be a factor too
Purchasing this product from e-trailer was very professional and pleasant. The product was shipped out in a very timely manner at a very minimal expense and arrived at my door as stated it would. The price was unbeatable for the product and is a very good quality weight distribution hitch. All parts were there with instructions how to install. I would recommend anyone looking for trailer parts to go to e-trailer for their next purchase.
This seems to be a nice hitch system. Appears well made. Doesn’t seem junky. It’s heavy enough to kill a guy (literally). I’m not really well rehearsed in different systems but this works quite well for what I use it for (10k equipment trailer). It went together easy (you will need massive wrenches/ratchet/sockets to snug everything up, 1 1/2”+) but handles my trailer well. I’d recommend it for the price.
I bought this to use on my Chevy 2500 HD for towing a 11,000 lbs. travel trailer with a 1300 lbs. tongue weight (dry weights). You always want to buy one rated a little higher than what you should need. I used it once so far, towing the trailer roughly 200 miles. It works perfectly keeping the trailer and truck level, just as it should. I found it very easy to assemble and use, with very clear instructions. (Hint: read completely through the instructions before you begin assembly. Bolts will not be tightened until later to allow for adjustments).
I was a little worried about setting up my first weight distribution hitch, but the instructions were clear and useful. I did have to give it a couple of tried to get the height right, but I worked out well. Would definitely recommend. And free shipping?!?!?! Sheesh, this thing is heavy. I'll definitely order from etrailer again,
Best hitch I've ever owned! I previously bought and used extensively a Curt 5th wheel hitch which was perfect. Both have been great performers...I tow without hitch problems or worries.
I missed the fact that this doesn't come with a hitch ball. It's obvious now looking at the listing with that in mind - and they aren't that hard to come by locally, but I'm lucky that I'm not too far from civilization right now!
So be sure to get a hitch ball, too!
Other than that, easy to assemble and works fine, just like the other one of these that I previously bought (that did come with a hitch ball...weird!)
We haul horses all around the country. Our truck has a slide in camper in the bed which requires us to use a 48" extension and w weight distribution system. The Curt system was east to install, has better tolerances than others we have used. Excellent value, we would buy it again without hesitation
Tongue weight of old trailer was 350 lbs. new trailer loaded up was 1100 lbs. Bought a new distribution hitch with 1400 lbs. rating to be sure it was adequate. Easy to fallow instructions for first time setup. No problems, works great.
It is easy to use and built well. One issue though when I originally set it up I tightened the saddle pieces to the torque recommended on the instructions. The threads started to strip. I fixed it with nuts and have used it since. I did call your company to make sure I did it right (the instructions were a little confusing on that part to me anyway). The lady I spoke to said I got it right and I did ask for a new part but decided to use it anyway with the intent to call back. This really was a little issue other then that for the price it was a great setup.
Craig
7/18/2021
No problems with it. I have at least 10k miles towed with it.
It works well. Your videos were a big help on initial installation. I also had to put a sway bar on my camper. If I were to do it over again I would have gotten the weight distribution system that includes the sway bar functionality. I discovered that system after I purchased the the weight distribution hitch. Overall the weight distribution system works very well. If you don’t need a sway bar, I highly recommend it.
Got exactly what I ordered and fast shi pping
Fast Service at a great price. Box arrived is great shape.
Heavy duty parts for sure, almost 90 lbs.
Did not install it yet, still building shelving in the new trailer so we have not got the final load in it to adjust the spring bars. Will get back when we get the trailer loaded.
Frank R.
8/24/2016
It has been a Year since putting this hitch in service, all is working perfectly. It did take an hour to set it up properly the first time for the height of my truck. You have the height and the tilt to get the spring bars the proper tension. All is good. Great Product at a great price.
Staff was helpful in helping me select product and accessories I needed for my Installation. My trailer has a tool box where the load hangers needed to be. A different mount solved the problem. Both etrailer and load equalizer get 5 stars. I’m on their mailing list and they carry an extensive line of products, many that I was totally unaware of. This opens new possibilities for future purchases.
I use my truck to tow a 14,000 GVWR trailer and needed an equalizer hitch for towing heavy loads. I pulled the trailer heavily loaded for over 2000 miles while bucking 20 to 30 mph headwinds and crosswinds. It tracked like it was on rails and strong wind gusts were hardly noticeable.
etrailer also has great articles regarding towing and other products they carry.
Richard M.
2/13/2019
Have used the hitch quite a bit in the past year with some pretty heavy loads. It has performed flawlessly and I couldn’t be happier. Would purchase this hitch again.
I've waited to write his review until I could comment on both etrailer's service and the hitch's performance. First the service: I couldn't believe how quickly this 100 lb. box arrived--two days! Everything was intact and nothing was missing. The customer support of these folks is just incredible. Their prices were as low as I found anywhere, and with their quality service I bought everything I needed here.
Now the hitch. I bought the Curt C17057 WD hitch which has 1400# round bars, plus a pair of Husky friction sway bars for my 25 foot Airstream towed with a 2013 F-150 CrewCab. It's a really nice hitch/TT/TV combination. It controls sway really well, is virtually noise free and transfers weight appropriately, plus isn't nearly as heavy as the ProPride/Hensley hitches. I selected the Curt, in part, because it has grease zerks on the head, while some other candidates didn't. I couldn't be more satisfied!
Biplaner
3/12/2017
One year later, the Curt weight distribution hitch is performing perfectly.It does a good job of transferring weight to the tow vehicle, is quiet and was relatively easy to dial in exactly for my vehicle trailer combination.I coupled it with two Husky anti-sway friction bars, although I have only installed one of them because that has proven enough for my 25 foot trailer. An Eaz-Lift Husky anti-sway bar combination was suggested for me by AndyThomson of CanAm RV, but I substituted the Curt because I liked the greasezerks on the Curt. The Curt is a really well-made unit. Id buy it again,as well as the Huskys, which Ive found to be quiet and effective.
Well packaged. Complete kit. Very well built with a strong black power coating. Speedy delivery. Friendly employees & answering all my questions.
I received the beat up but we'll taped packed with all the parts included.
I bought a new travel trailer recently. This weight distribution hitch restored my tow vehicle front axle weight to it's original unhitched weight and also to it's unhitched front axle wheel well height measurement. I also was able to load 300lbs of cargo to the front of the travel trailer and only measured a 1/2 inch of increase to the front axle wheel well height.
A very sturdy system and aside from the weight of the hitch easy hook-up and release . I would not hesitate to buy this product again.
Highly recommend E trailer ssave
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Patrick
3/31/2019
Still very happy with my Curt Weight Dist bars hitch system. After a year of commercial use hauling Travel trailers and 5th wheel trailers,I am extremely happy with the performance, lack of extreme wear and functionality of the system in general. The bars have withstood some heavy use without showing much sign of metal wear or fatigue on the high wear points where they snap up into the mounting slots. Locking spring system for the bars are still tight,and chain brackets show little wear along with being extremely simple to install on a variety of different trailer models. Very happy with all my Etrailer products and their fast delivery and helpful communication through all my purchases.