Product Experts Available Now!
Call 1-800-940-8924
Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend
(332 reviews)
Price: $126.28
In Stock
Wheel Masters
Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend
Part Number: WM8001-135
In Stock
$126.28
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (332)
- Q & A (0)
- Photos
Wheel Masters Tire Inflator - WM8001-135
- Dually Vehicles
- Inflation Kit
- 16 - 19-1/2 Inch Dual Tires
- Wheel Masters
These stainless-steel-wrapped hoses with a 135-degree bend take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel or aluminum rear wheels with wheel liners. Hardware included.
Features:
- Inflation kit lets you easily check air pressure and inflate your vehicle's dually tires
- Relocates inner tire's valve stem to outer wheel and extends valve stem on outer tire
- No crawling on the ground or reaching for valve stem on inner tire
- Stainless-steel-wrapped, 2-ply rubber tubing with nylon braiding
- Durable wrapping helps prevent hoses from cracking or leaking
- Simple hub-mount installation with included hardware
- Hoses attach to valve stems on inner and outer tires
- Brackets mount on steel or aluminum rear wheels with wheel liners
- 4 Hoses included
- Made in the USA
Specs:
- Application: inner and outer tires on 16", 16-1/2" and 19-1/2" dual wheels
- Hose bend: 135 degree
- 1-Year warranty
Checking and maintaining proper tire pressure is important for ensuring a safe, smooth ride and maximizing fuel economy, but it can be a real pain with dually tires. The Wheel Masters inflation kit takes the hassle out of checking air pressure and inflating your dual tires.
Two hoses extend the valve stem location of the inner tires to the outer wheels. This means no more crawling around on the ground or blindly reaching for the valve stem on the inner tire. Two 135-degree hoses are also included to make it easier to access the valve stems of the outer tires. And the stainless steel wrapping on the hoses helps prevent them from cracking or leaking.
Hub-Mount Installation
The dually inflation kit is designed for steel or aluminum rear wheels with wheel liners.
- Install 2 of the included brackets on the hub of each outer wheel. Make sure to align the brackets with the valve stem and a hand hole.
- Attach the hoses with straight valve extenders to the valve stems on the inner tires.
- Attach the hoses with 135-degree-angled extenders to the valve stems on the outer tires.
- Run the hoses to the outer wheels and attach the hoses to the hub-mounted brackets.
- Screw on the valve caps.
8001 Dual Tire Inflators by WheelMasters - 16", 16.5", 19.5" Dual Wheels - 4 Hoses - Hub Mount - Stainless Steel - 135-Degree Bend
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.6
332 reviews
by:
JJKLCNM
03/24/2025
Good Product. Due to relationship between the steel wheel & the stainless steel wheel liner, the angled pieces required additional bending, carefully to allow clearance through the vent. Other than that, installation was straight forward.
Jjklcnm
3/31/2026
The Tire Inflaters continue to perform well, though one of the braided lines leaked and had to replaced. I still recommend them because of the ease of maintaining the inflation.
by:
Neil
08/31/2020
Installed to replace an existing set on an F53 chassis with 19.5” tires. Lengths of the extenders is perfect for these wheels. They have good stem seals as tires maintain pressure for many months. Only draw back is the routing puts them in contact with wheel simulator cutouts which over many miles will start to cut into the metal sleeve. This was the reason I decided to replace the original set.
by:
David
03/20/2026
Comparison to lessor priced option thru Amazon, there is a very clear difference in the construction of these extenders .. thicker protective wrap, solid connections .. key elements to ensure that they last. This is an upgrade to the first set (from a different online retailer) that failed. Only time will tell once the miles accumulate on MBS Class-C RV, but I feel more confidence just from their construction ..
by:
John
03/20/2026
After installing it is so much better to inflate my tires
by:
Jeff
09/18/2024
Good product. Works with TireMinder i10. Attaching bracket to the center hub required a small right angle drill attachment.
Jeff
9/19/2025
These extensions have been very good. The pop rivets that hold the bracket to the center hub didn’t last. Easy fix to replace.
by:
Bob in PA
05/01/2021
The hose inflation kit allowed me to install flow through sensors on the rear wheels of my motorhome. They would also make it easier to check pressure and add air. I had to borrow a right angle drill to be able to mount the right angle brackets on the hub. But once in place these work very well.
by:
Clayton
10/30/2025
The hose extension kit is exactly what I needed to replace my leaking ones. Delivery was timely and product was good quality.
Unfortunately the price was so much higher than previously paid. But crawling under my motor home is not something that I am capable of so this is the best option.
Unfortunately the price was so much higher than previously paid. But crawling under my motor home is not something that I am capable of so this is the best option.
by:
Christopher
02/07/2024
Easy to install as long as you have a small right angle drill. I bought such a tool 20 years ago and have used it twice, back in 2004 on a 1997 Tioga and again this year installing this same dually inflation kit on the wheel covers of my 2016 Thor. Installation was basic, with just a little care to make sure the hoses lined up opposite of one another, and the brackets positioned the hoses with the right amount of slack and angle. Makes inflation (before every trip!!) a breeze, can't easily do it without this kit.
Christopher
2/8/2025
Been about a year since I installed the tire inflator kit and it is working perfectly, as advertised. Check tire pressure before every trip is a must and this kit makes it a breeze. Great access and no leaks!
Robin H.
2/9/2025
@Christopher it is nice to hear someone is out there checking before each trip. Glad this is working well for you!
by:
Happy Camper
11/26/2022
Been on truck about a year.
Well made kit that just exactly what it claims to do—makes airing up the duals as easy as airing the steer tires.
It makes would *should* be an easy job actually easy.
Install was straightforward. No complaints and would/will buy again.
Well made kit that just exactly what it claims to do—makes airing up the duals as easy as airing the steer tires.
It makes would *should* be an easy job actually easy.
Install was straightforward. No complaints and would/will buy again.
by:
Doug
02/20/2025
Although the product did not work as expected, etrailer was very helpful in contacting the manufacturer for support and allowing me to return the product for a full refund. The issues was that I had looked up the product based on a particular vehicle 2024 F450 Super Duty. The site indicated the valve stem extenders would work. They would not fit without resending the tubes as others had done. I was not comfortable bending the tubing as one slight move could kink the tubing and render them usable and no longer returnable. After talking with the manufacturer, they told me they would not work and that I needed a 180 degree bend vs the 135 I purchased. etrailer did not have the 189 degree listed on their website. The manufacturer was willing to sell to me directly, so I purchased the 189 degree valve stem extension direct from the manufacturer. I'm happy, I got something that works.
Victoria H.
2/20/2025
That's good to hear you were able to get this sorted out, Doug! I'm happy you found something that works too, and we appreciate your feedback as well!
by:
Gary
04/10/2026
Thanks for the help. Everything worked great.
by:
Cableup
02/06/2020
2016 F350 duallie.
This air valve extension kit solved my issue. It was a battle getting air into my inners through the stock stems. I bought different chucks and a couple worked... ok. OK doesn't cut it in the middle of winter in NH so I wanted a good solution.
This was it. Valves are right up front for easy access. Doesn't look half bad either.
You would think the downside is that there is no balancing valve like pricier units. I have to fill each tire individually. Not really a bad thing since I run the inners a little lower when the truck is empty, most of the time. Bump them up even with the outers when hauling. Couldn't do that with a balancing valve.
This air valve extension kit solved my issue. It was a battle getting air into my inners through the stock stems. I bought different chucks and a couple worked... ok. OK doesn't cut it in the middle of winter in NH so I wanted a good solution.
This was it. Valves are right up front for easy access. Doesn't look half bad either.
You would think the downside is that there is no balancing valve like pricier units. I have to fill each tire individually. Not really a bad thing since I run the inners a little lower when the truck is empty, most of the time. Bump them up even with the outers when hauling. Couldn't do that with a balancing valve.
Cableup
2/7/2021
So a year later and etrailer reached out to me to update my review after a years use. Well, I havent thought about the kit much since I put it onto my duallie. I think that sums it up. They work. I dont have to visit with them except to make sure my pressures are where I want them and when I look at my wheels I like what I see. Good price, good kit, good results. Win.
by:
David
11/26/2025
This kit does not fit a 2025 F450 with stock wheels. The rear extension hose will fit but the 135 degree bend will not fit through the hole in the outer wheel. I had to go to a 180 degree solid extension for the outer wheel valve stem.
Nick S.
12/1/2025
I appreciate that feedback and I am sorry to hear it did not work out for your setup. It sounds like you were able to find something that works. We will reach out shortly and help you out with a return.
by:
Steven
02/06/2024
These were exactly as described and feel like they are a well made item. So far (1yr) they have not leaked at all and I have had no issues with them but for one exception: After a couple thousand miles in hot summer driving and with RV tire pressures creeping up to 115psi while on the road, there is a thick black rubbery substance extruding out between the strands of the braided covering. If this is just cosmetic it's not big deal because it cleans off easily. I am concerned that it may be the rubber of the line inside the braided covering starting to break down and that could be dangerous.
Jenny N.
2/8/2024
I reached out to the manufacturer and they advised that with extreme heat it is possible that they are melting on the inside. However it would be the first time that they had heard about it happening. Would it be possible that oil ha gotten in or on the lines? Would you be able to send a picture of what you are seeing?
Jenny N.
2/15/2024
@Steven I had Wheel Masters take a look at the pictures and they did not see any separation in the in the extender that would account for the black substance. They felt it could be grease and/or oil from the axle or the brakes. You can use the extenders and not have to worry about the rubber deteriorating.
by:
Amy
01/04/2023
We put these on our Ford E350 dually Shuttle bus. They work great! It’s been one year and we’re very happy.
We also bought a set of the large rubber spacers that go in the hole of the dually rim to hold the braided line.
Easy to check and fill dually tires. They do not leak either. Highly recommend!
We also bought a set of the large rubber spacers that go in the hole of the dually rim to hold the braided line.
Easy to check and fill dually tires. They do not leak either. Highly recommend!
by:
Robin
06/16/2018
Makes checking air pressures very easy. Having a class B on a Sprinter chassis, the outside tires were extremely difficult to monitor...now easily handled. Not difficult to install.
Robin
6/16/2019
My previous comments still apply
by:
Wendell S.
10/23/2017
Installation was relatively easy. Initially I thought I may need to remove the outer wheel assembly to access the inner dually. I was able to squeeze my fat hand through and thread the hose on without much of a fight. The stiff hoses are a little tough to manipulate into place to determine where to mount the brackets. I opted to drill my decorative axle cover and pop rivet them in place. I did foul up on one bracket though. The instructions stated for my Ford to pop rivet from the inside. Obviously this is to give more surface area on the plastic cover. I drilled the last bracket holes without paying attention and one hole was too close to the lug attaching point. No way to get the rivet gun on that one. Had to install it from the outside. If it gives out I'll re-do it with a back up washer. Just pay attention when/if you drill yours. MAKE SURE OF YOUR CLEARANCE! So far I like these things!
by:
BakerRV
07/22/2023
The extensions screwed on easily, just had to fiddle with which way to orient the hoses so they fit through the wheel cover. Had to buy a right-angle drill adapter and some short drill bits to fit between the "rim" and center hub of the wheel cover to drill the L-bracket holes. Stainless steel is a bugger to drill compared to mild steel or aluminum, but the new drill bits helped. Only needed the 135° adapter hose for the outside rim because the inner rim had a easy to reach extension already installed by the factory. Should make checking tire pressure much easier, and with a "regular" gauge and air chuck instead of that 2-way chuck.
by:
Patrick
10/13/2021
I have a 1997 Ford F-350 Ford Dually with wheel simulators. Can't check or add air to tires with the simulators. Saw your wheel masters inflation kit. I ordered the 135 degree kit. Broke the ends off the bent hoses trying to get them to fit thru the rim & simulator hole. Re-ordered the 90 degree WM8001 kit. Found out the hard way that the installer of my tires used 4" rubber valve stems. This kit works great if you use a 4" straight valve stem on the inside wheel and a 1 1/4" valve stem on the outside wheel (bolt thru wheel valve stem). The correct valve stems are the secret to making this kit work. Completed installing the kit today and am completely satisfied.
by:
James
12/25/2019
The only reason I did not give a 5 star review is I had to make a slight modification to the outter wheel hoses. On my 2017 Ford F-450, the 135-degree bend did not allow me to connect the hose to the existing valve stem. I used a vise and carefully adjusted the bend to approx 140 degrees on each hose and they worked fine. I also recommend you use longer pop rivets and use backers on them to ensure long term durability of the mount. Now, the the kit itself: I really like it. After install, I was able to check the tire pressure and easily inflate both sets of duals to the recommended 80 psi. With this kit, maintain proper air pressure is going to be much easier. I expect a long service life from this kit and I'm very happy with the purchase.
by:
Alan
02/12/2024
Fairly easy to install. Had some difficulties with installing the riveted bracket to the center hub of my wheel simulator (hubcap) being stainless it’s very hard to drill with a 90 degree drill motor (not much room either).But the finished job looks good.
by:
Pat
05/11/2023
Since installing, I have not had any problems with the tire valve extensions. Actually makes checking and inflating tires much easier.
by:
Robert
10/31/2025
We put these on our RV in 2020 and they have worked well. This purchase was to replace a hose that was leaking after 50,000 miles. Very satisfied with a multi year life
by:
Bruce
11/27/2022
A truly quality product! Industrial grade, easy to install, and is a perfect fit for my class C 16-inch wheels! I give this product an A for quality and let me add an A++ for all of the employee support on this and many other products! From emails to instruction videos. Thank you to all for all of your help on this and many other products! You Rock!
by:
Mike
08/04/2025
Just what I needed. Found this item at several vendors some less expensive but brought from etrailer due to their service and respond should I have an issue with the hoses.
25
332
true
Show More Reviews
See what our Experts say about this Wheel Masters Tire Inflator
- Recommended Valve Extender and Suspension Enhancement For 2018 Ram 3500 Dually 4x4 The Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88295 is the best choice in air bags to help stabilize your load. These air bags are going to reduce the strain on your rear suspension. They're going to help increase safety and compensate for uneven loads. They allow you to level your vehicle front to back and help maintain safe headlight aim, and they adjust independently for side to side leveling of off center loads, and it's really going to help improve steering and braking...
view full answer...
- Valve Stem Extension Recommendations for RV with Dually WheelsHey Danny, If you're needing valve extensions for your dually trailer tires, we've got a few different options for you. I do recommend using the Wheel Masters brand valve extensions because they confirmed that these will work with the rubber valve stems. They do recommend using the Wheel Masters Support brackets for Rubber Valve Stems part # WM8029VS in addition to the extension to support the rubber stem since they can be flimsy. A 45-degree bend valve extender like the # WM8029 is...
view full answer... - Will The Wheel Masters 4-Hose Inflation Kit # WM8001-135 Fit A 2018 Winnebago Vista 29VEHey Chris, From what I can find your 2018 Winnebago Vista 29VE has 19.5" wheels so the Wheel Masters 4-Hose Inflation Kit # WM8001-135 would work. Based on the photo the 135 degree bend is likely going to be the best fit but you might have to play around with it to get it perfect. These inflation kits can easily be installed at your home so you aren't wasting money on labor. I've attached a short video below where Dave will walk you through the installation process.
view full answer... - Valve Extender Kit for 2024 GMC 3500Hi Clarence; the Wheel Masters 4-Hose Inflation Kit # WM8001-135 you were looking at is likely the best option for your 2024 Sierra 3500. However, you will want to take a look at your valve stems to determine the route to the front of the wheel to determine if they will work well with your setup. These have a 135 degree bend but we also have the # WM8001 with a 90 degree bend if it looks like that would be a better fit. As far as instructions go, the best I can offer is the written instructions...
view full answer... - Recommended Method For Installing TPMS Sensors On Inner Dual WheelsThe easiest way to install the TST TPMS for RVs # TST-507-FT-6-C on hard to reach dually valve stems would be to first install some valve extenders like the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend # WM8001-135. This would allow you to easily install or remove the sensors for charging without having to struggle every time. The valve extender kits do have a range of fits so just let me know what size wheels you have and what angle you feel...
view full answer... - Recommended Valve Stem Extenders for E-450 Super Duty ChassisThe 135 degree hoses are not offered separately from the Wheel Masters 4-Hose Inflation Kit unfortunately. I wish I could tell you exactly what you need but these are not vehicle specific parts, they are universal therefore up to the installer to determine compatibility. That said, the Wheel Masters 4-Hose Inflation Kit part # WM8001-135 is pretty common for dual axle motorhomes so they should work for you as well. They are compatible with TPMS.
view full answer... - Using TPMS Flow Through Sensors And Valve Extenders On A 2024 Ford F-450 Hi John, TST Flow Through Sensors # TST-507-FT-S2 are approximately 2-1/8" long so they do add a bit to the overall length of the coming from the valve. TST likely told you that the sensor has to be directly after the valve to avoid any movement with the sensor that could damage it or the valve and to help prevent any false readings. With valve extenders like the Wheel Masters # WM8001-135 you'll be able to tuck the excess cable up since you'd be mounting the end of the extender to the...
view full answer... - Valve Stem Extension Kit that Can Fit 2016 Ford F-350 DuallyWe have valve stem extension kits like the part # WM8001-135 which were designed for use with dually wheels like what you have on your 2016 Ford F-350.
view full answer... - Tire Valve Extenders For a 2006 Winnebago RV On a Mercedes Sprinter 3500 ChassisFor your rear dually wheels the Wheel Masters 4-Hose Inflation Kit # WM8001-135 is the best kit for your set up. This will allow you to mount the fill points near your hub center for much easier access. The front wheels will need the Wheel Masters Tire Pressure Valve Extenders # WM8029135. These will allow you more easily reach the valve without having to use a special inflator. For wheels with rubber valve stems you will need the Wheel Masters Support Brackets # WM8029VS to stabilize...
view full answer... - 90 Degree or 135 Degree Wheel Masters Inflation Kit for 16 Wheels on Ford E-450 MotorhomeIf you have wheel liners then you want to use the 135 degree bend kit part # WM8001-135 but if you have wheel covers then you need the 90 degree bend kit part # WM8208 instead. Attached are demonstration videos of each for you to reference.
view full answer... - 2020 GMC Sierra 3500 Valve Stem Extender RecommendationI recommend checking out the Wheel Masters 4-Hose Inflation Kit # WM8001-135 which is designed for 16" to 19-1/2" Dually wheels. These kits are universal fits so you might need to move some stuff around to get them to fit correctly.
view full answer... - Valve Extenders For a 2022 Jayco Greyhawk 27U RV MotorhomeI recommend the Wheel Masters 4-Hose Inflation Kit # WM8001-135 for the rear of your 2022 Jayco Greyhawk 27U RV motorhome. This will allow you to easily access both the inner and outer tires to add or release air when needed. For the front tires you will want the 45 degree Extensions # WM8029
view full answer... - Best Wheel Master Valve Extender on a 2014 Ford F-350 DuallyFor your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part # WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part # WM8001-135 causes the hoses to be in contact with your rim as soon as it comes off the valve stem. I like the decision to get these. They can save a lot of headaches trying to get to that rear stem with standard air chucks. I've attached a video David did on them to give you a little more insight into the installation...
view full answer... - Determining the Correct Valve Extenders For A 2018 Chevy Silverado 3500 High Country There unfortunately isn't a guide to tell us what the correct degree bend you'll need for easier access to the valve so you'll want to take a look at your valve stems to see how they're sitting and determine the route out to the front of the wheel. For most dual wheel applications the Wheel Masters 4-Hose Inflation Kit # WM8001-135 has been the best fit in my experience. This has a 135 degree bend but there's also a 90 degree option # WM8001 as well. Without really seeing how everything...
view full answer... - Valve Extenders for Outer Dual Rear TiresThe 45-degree bend valve extenders like the Wheel Masters # WM8029 that you referenced are usually the best option for the outer wheel on dually wheel setups. We do also have 135-degree bend extenders with part # WM8029135 if your particular wheels don't allow the 45-degree units to be a good fit. Another option you might consider is the Wheel Masters 4-Hose Inflation Kit # WM8001-135. This kit will let you relocate the inner tire's valve stem to the outer wheel while also extending the...
view full answer... - Valve Relocation Kit Needed for Big Tex 22HG TrailerWe have 2 different kits for you to choose from and it all depends on if you need a 45 degree bend in the hose, kit # WM8208, or a more severe 135 degree bend in the hose, kit # WM8001-135. Attached is an installation video of the kit with the 135 degree bend that you can check out.
view full answer... - Tire Valve Extenders for 2018 Coachmen Leprechaun Class C MotorhomeUsually 45-deree valve extenders like the Wheel Masters # WM8029 which you referenced are the best bet but we also have 135-degree extenders # WM8029135 for when a sharper bend is needed. Another way to go is the Wheel Masters 4-Hose Inflation Kit # WM8001-135. This kit will let you relocate the inner tire's valve stem to the outer wheel while also extending the valve stem on the outer tires.
view full answer... - Valve Stem Extenders for 2017 Coachmen FreeLanderFor a dually setup like what is on your 2017 Coachmen Freelander you'd want the Wheel Master 4 hose kit part # WM8001-135 which would mount to your wheel's hub. The valve stem attachment have a 135 degree bend but if you prefer a 90 degree bend the part # WM8001. It really depends on your wheel setup which would work best for you.
view full answer... - Tire Valve Extenders for 2017 Winnebago View 24J Class C MotorhomeI linked our main page for valve extenders so you can see all the items we carry but since your Winnie Class C has dual steel rear wheels I lean toward the Wheel Masters kit # WM8029135. These have a 135-degree bend and are USA-made with nickel-over-brass construction. Of course, you're free to use whatever length and bend works best for you. There are lots of different opinions on this subject to be found on Winnie forums and you might care to review some of those.
view full answer... - Recommended Valve Stem Extension for Thor 24F Motor CoachI looked up the wheel size of your Thor Motor Coach 24F and it uses 225/75-16 dually wheels like what the Wheel Masters kit part # WM8001-135 you referenced is designed to fit, but I'd recommend going with an airless kit like the part # WM82082 instead. The airless kits mean that the hose doesn't have any air in the line when it's not inflating/deflating. This means the kit wouldn't leak air if it was somehow damaged.
view full answer... - Recommended TPMS System and Valve Stem Extenders For a 2017 Winnebago Minnie Winnie M31K Ford E-450Yes, the Wheel Masters 4-Hose Inflation Kit # WM8001-135 will be the extenders you want for your 2017 Winnebago Minnie Winnie M31K on the Ford E-450 chassis. You should really consider using a system like the TST TPMS # TST-507-INT-6-C which uses internal sensors. This will give you the most accurate information about what is going on with the temperature inside the tires. With external sensors like the TPMS # TST-507-FT-6-C uses at the end of the extenders they will not give you an accurate...
view full answer... - Length Of Inner And Outer Hoses On Wheel Masters 4-Hose Inflation Kit # WM8001-135For the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend # WM8001-135, the inner hose is 13 inches straight and the outside hose is 9-1/2 inches. I've attached a photo to help.
view full answer...
- Valve Stem Extension for Thor Freedom Elite 24FE Mercedes Sprinter The Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend # WM8001-135 would be the correct inflation kit for the dually setup of your Thor Freedom Elite. This will attach both of the valve stems to the center hub of the wheel which will make checking the pressure and inflating the tires very easy and convenient.
view full answer... - Recommended Dually Inflation Valves for Entegra Coach Odyssey MotorhomeThe Wheel Masters 4-Hose Inflation Kit part # WM8001-135 will be a great option for an Entegra Coach Odyssey Motorhome with 16" wheels. It comes with lines for both the inner and outer rear wheels. I have attached some install steps below. 1) Install 2 of the included brackets on the hub of each outer wheel. Make sure to align the brackets with the valve stem and a hand hole. 2) Attach the hoses with straight valve extenders to the valve stems on the inner tires. 3) Attach the hoses with...
view full answer...
Do you have a question about this Tire Inflator?
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Dustin K
Video by:
Jonathan Y
Written by:
Wilson B
Test Fit:
David F
Test Fit:
Kevin C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
3/25/2025
Thanks for the helpful tip. Photos look great!