Roadmaster Standard Magnetic Tow Lights

See what our Experts say about this Roadmaster Flat Tow Wiring Harness

• Parts Needed to Flat Tow a 2021 Lincoln Corsair PHEV
  In regards to a 2021 Lincoln Corsair, only the PHEV models with 2.5L engine can be flat-towed. In order to do so you'll need a base plate kit, tow bar, safety cables, tow bar wiring harness, and supplemental braking system. I have attached a list of these parts for you below. Roadmaster Direct-Connect Base Plate Kit part # RM95RR Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676 Roadmaster Standard Magnetic Tow Lights part # RM-2120 Blue Ox Patriot Radio Frequency, Portable...
  view full answer...
• Recommended Baseplate For A 2008 Mini 2-Door Hardtop
  Hey John, If you have a 2008 Mini Cooper hardtop S-model or 2008 Mini Clubman hardtop then you'll need the Roadmaster # 521877-1. This will work with Aerodynamic Package, but not with Sport suspension. If you have a 2008 Mini Cooper hardtop base model then you'll need the Roadmaster # 521878-1. This does not fit models with Aerodynamic Package or Sport suspension. If you haven't picked out the rest of your flat towing setup then I have the following recommendations for you: Tow Bar:...
  view full answer...
• Which Base Plates For Towing Will Fit A 2010 Jeep Wrangler Unlimited
  Both the Roadmaster EZ4 Base Plate Kit # RM-521448-4 and the Roadmaster EZ5 Base Plate Kit # RM-521448-5 will fit your 2010 Jeep Wrangler Unlimited if it does not have an aftermarket bumper, winch, or guards. I recommend the Roadmaster EZ4 Base Plate Kit # RM-521448-4. The Roadmaster EZ series base plates are our most popular base plates. They will fit all the Roadmaster tow bars and they have the hidden bracket design. The EZ5 series base plates will not work with tow bars that require...
  view full answer...
• Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2004 Ford F-150 Heritage
  The RoadMaster Blackhawk 2 All Terrain Tow Bar # RM-422, is a bolt on application designed to bolt onto a vehicle that is equipped with Blue Ox base plates. But first, you would need the base plates. For base plates, you can use Roadmaster MX base plates, # 492-3. To install the base plates, trimming of spoiler, air dam, grille or plastic fascia may be required on some models of the 2004 Ford Heritage F-150. Base plate installation requires a good amount of mechanical experience and skill...
  view full answer...
• Base Plates for a 2006 Subaru Outback for Falcon 2 Tow Bar
  Yes, you can get base plates by themselves for your 2006 Subaru Outback. I recommend XL base plates # 917-1 which are the most popular option for your vehicle. You mentioned that you have a tow bar and all of the accessories. I wouldn't be doing my job if I didn't make sure you had everything you are going to need. Flat towing requires 5 main components: base plates, tow bar, safety cables, lighting, and supplemental braking. We have the base plates and tow bar covered so if you need...
  view full answer...
• Will Pilot Magnetic Tow Lights # RM-2120 Have Connection if Lights Are Mounted in Vehicle Interior
  You could certainly place these lights inside of the vehicle and run the wire out through a window as long as you could find a way to mount them. They are magnetic.
  view full answer...
• Tow Bar Wiring For 2021 GMC Sierra
  They do not; for tow bar wiring on your 2021 GMC Sierra 1500 you will need a splice in kit, the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. If you do not want to splice your only other option are magnetic tow lights, the Roadmaster Standard Magnetic Tow Lights # RM-2120.
  view full answer...
• Parts Needed to Flat Tow a 1997 Jeep Wrangler
  For your 1997 Jeep Wrangler with an off-road bumper there are a number of parts you'll need which we can make work while remaining economical. The first thing you'll require is the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035-1 and the best option for a tow bar would be the Falcon 2 # RM-520; you'll also need safety cables # RM-643. For lighting you can use Roadmaster # RM-2120, which hook up to your tow vehicle's 4-way. Should you not want lights...
  view full answer...
  
• What Parts And Accessories Do I Need To Flat-Tow 1990 Mazda Miata MX-5 Behind 2001 Winnebago Brave
  To flat-tow your 1990 Mazda Miata MX-5 behind your 2001 Winnebago Brave, you will need base plates, tow bar, safety cables, vehicle wiring or lights, and a supplemental braking system. For a base plate kit, you will need Roadmaster XL Base Plate Kit, part # 711-4. The XL Base Plate Kit features removable draw bars, so when you are not towing your Miata, the base plate brackets are less visible. For a tow bar, I would recommend the Roadmaster Falcon 2 Tow Bar, part # RM-520. The Falcon...
  view full answer...
• Can Magnetic Light Kit # RM-2120 Wiring Be Attached Directly to the 7-Way Connector of a Tow Dolly
  You could potentially install the magnetic light kit # RM-2120 in the manner you have described. However, you would need to make sure the magnetic lights wiring is connected on the tow dolly side connector for easy installation and removal. Adding more wires to the 7-Way can increase the chances of a short circuit and there may not even be room depending on the gauge of wire used on the tow dolly. If there is no room or it looks like the wires for adjacent circuits could touch, I recommend...
  view full answer...
• What Parts are Needed to Tow Jeep with the RoadMaster StowMaster Car-Mounted Tow Bar w/ Lunette Ring
  Other than the Tow Bar, you would need the wiring so that the lights on your Wrangler would work in tandem with the lights on the tow vehicle, and the vehicle-specific base plates that would attach to the Wrangler. The base plates provide an attachment point for the quick disconnect bracket on the Tow Bar. For the wiring, there are three different methods that can be used. The simplest way to go would be to use the magnetic mount light kit, part # RM-2120. This kit has the benefit of...
  view full answer...
• Front Mount Trailer Hitch and Parts Needed to Flat Tow a 2008 Ford Ranger 2-Wheel Drive
  Curt front mount hitch # C31063 will fit 2-wheel drive models of the 2008 Ford Ranger unless manufactured in a Canadian assembly plant. A front mount trailer hitch does not replace the need for base plates to flat tow a vehicle. Flat towing requires 2 attachment points on the vehicle, not a single one like a hitch would offer. For base plates, if you have a Sport model use # 477-1. For an XL or XLT 2-wheel drive, use # 477-5. For a compatible tow bar you can use any Roadmaster tow bar,...
  view full answer...
• Will the Blue Ox Aventa II Tow Bar Fit on Blue OX BX3503 Base Plates
  Yes. The Blue Ox Aventa II tow bar will work with the Blue Ox Base Plates # BX3503 without any issues on your 1992 Geo Tracker. You may also need a lighting solution for this new setup on your Tracker, so if you need lights also, the Roadmaster Standard Magnetic Towing Lights # RM-2120 are an easy to install choice that won't break the bank. A complete flat towing setup will consist of a tow bar, base plates, safety cables, tow bar lighting, supplemental braking and possibly a high/low...
  view full answer...
• Can Wireless Towed Vehicle Lights Be Used with Tow Dolly Lights
  The Custer Wireless LED Tow Bar Light part # LIW-LDTL-7B and Pilot Magnetic Tow Lights part # RM-2120 are both excellent options for magnetic tow dolly lights which are wireless so no wires between the vehicle and toad are needed. In regard to powering both the tow dolly lights and the wireless magnetic lights, this is not really something that I have seen before. In order for it to be possible the amp draw of the tow dolly lights and wireless magnetic lights would need to be less than...
  view full answer...
• Base Plates, Wiring, and Safety Cables to Flat Tow a 2001 Subaru Forester
  For your 2001 Subaru Forester, you will need to use base plate # 909-9 since your Forester does not have a brush guard. This base plate is the XL style. This means that you can use your Falcon Tow Bar, like # RM-520 or # RM-522. You may also be interested in the Roadmaster Quick Disconnect Tow Bar Base Assembly, # 910021-00, for your Falcon tow bar. This assembly will allow you to connect the tow bar to the above base plates. In addition to base plates and a tow bar, there are a few other...
  view full answer...
• 2004 Ford Ranger Step-Side Pickup 2 wheel Drive Base Plate Fitment
  The base plate that will fit your 2004 Ford Ranger step side 2 wheel drive extended cab truck is the Roadmaster Tow Bars for the Ford Ranger, part # 483-1, I have linked the page below. Along with the base plate you may also need the following: Tow Bar # RM-020 or # RM520 Tow Bar Wiring # RM-154, # RM-155 or #RM-2120 Safety Chains # RM-645 or # RM-643 There are also various accessories available for Tow Bars, which I have linked below. If your 2004 Ford Ranger is the Edge...
  view full answer...
• Compatibility of Parts From Flat-Towing other Vehicle on My 2012 Ford Edge
  Besides the base plate kit and the maybe the wiring kit used, you should not have any issues using the components used to flat-tow your GMC Yukon XL to flat-tow your 2012 Ford Edge. The item you selected, Roadmaster XL Base Plate Kit # 4408-1, would be the correct kit for your 2012 Ford Edge. The # 4408-1 kit features removable draw-bars to make the base plate kit less visible when the vehicle is not being towed. In addition to a base plate kit and your Blackhawk tow bar, you should...
  view full answer...
• Connecting Magnetic Tow Bar Lights With 4-Way to Motorhome With 7-Way
  We have some options for you to connect magnetic tow bar lights to a motorhome connector (which should be a standard RV 7-way), though there isn't an adapter to go from the 4-round on the Heavy Duty Magnetic Tow Light Set # 337TL257M. While you could do some cutting and splicing to get it to work, the much easier option is to go with a magnetic light set with a 4-flat, the Roadmaster Standard Magnetic Tow Lights # RM-2120. There is an adapter that will go from a 4-flat to a 7-way, so...
  view full answer...
• Base Plates, Wiring, Braking to Flat Tow a 2003 Honda CR-V Behind a Motor Home with Falcon Tow Bar
  Base plates are vehicle specific so you will need to get some for your 2003 Honda CR-V. But first, go ahead and check the owners manual for any additional important information on flat towing it. For base plates, you can use # 1541-1 if your CR-V does NOT have a brushguard. If it does have a brushguard use # 1541-3. Since you have used the Falcon Tow Bar before, you may not need to add safety cables if you already have some. If you do need safety cables use # RM-643. You will also need...
  view full answer...
• Wiring, Base Plates, Tow Bar and Accessories Needed to Flat Tow a 1997 Ford Ranger
  To flat tow your 1997 Ford Ranger behind a motor home, you will need a special wiring set up. A regular wiring harness will not work. There are a couple of options for you. First, if you will not be towing the truck very often, I recommend using a magnetic light kit like # RM-2120. If you will be towing the truck frequently, I recommend a diode kit, # RM-154. I have included a link to a video that shows a typical installation of this kit for you. Installation of a magnetic kit is simple...
  view full answer...
• Falcon 2 Roadmaster Tow Bar # RM-520 Recommendation For 2011 Fiesta
  The tow bar that I recommend you use with the Roadmaster Tow Bars # 524425-1 that you referenced on your 2011 Ford Fiesta would be the RoadMaster Falcon 2 Tow Bar # RM-520. This tow bar comes with quick disconnects. You would only need safety cables, # RM-643, a lighting solution and possible a supplemental braking system and you would be ready to go. For lighting I recommend Roadmaster Standard Magnetic Tow Lights # RM-2120 if you are looking for a temporary solution or a Roadmaster...
  view full answer...
• Comparing Direct-Connect and Crossbar Base Plates for 2018 Jeep Wrangler JL Unlimited
  The difference between the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 and Roadmaster Crossbar-Style Base Plate Kit # RM-521453-4 is how tow bars attach. As the name suggests, you will connect your tow bar straight to the direct-connect base plates while the crossbar style will require you use your tow bar's crossbar or quick-disconnect. This makes the direct-connect the easiest base plate to connect to and disconnect from. Because of that, for your 2018 Jeep JL Wrangler Unlimited...
  view full answer...
  
• Complete Flat Towing Set Up for a 2021 Mini Cooper 4 Door
  I would be happy to help you set your 2021 Mini Cooper 4 door up for flat towing. To start out with you're going to need a base plate kit. You will want the Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521884-5. This fits the convertible and hardtop - S models and the base model. The hidden bracket design provides improved aesthetics compared with standard brackets. I have attached a picture below of what this base plate kit will look like with the arms removed. Next...
  view full answer...
  
• Parts Needed to Move SMI Air Force One to a 2018 Jeep JL Wrangler Unlimited
  In addition to the Replacement Towed Vehicle Installation Kit # SM99226 you will also need brake light relay # RM-88400. The # RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn but is not required if using magnetic tow lights such as # RM-2120. I have linked a video on the relay for you but it is on a JK model so it won't be exactly the same on your new 2018 Jeep JL Wrangler Unlimited....
  view full answer...