Best Way To Remove Rear End Sag On a 2015 Ford Expedition EL XLT When Towing a Travel Trailer  

Question:

Expert Reply:

The best product for leveling your 2015 Ford Expedition EL XLT when towing a travel trailer is with a Equal-i-zer Weight Distribution System # EQ37100ET. This will allow you to level your Expedition with the weight distribution and will also give you trailer sway control to make driving safer and less work. This particular hitch system is rated for trailers that have a tongue weight of 600-1,000lbs and a maximum total weight of up to 10,000lbs. An included adjustable shank will allow you to level your trailer when connected to your Expedition.

A 1-7/8" 12pt Thin Walled Socket # ALL643216 is required to install the included 2-5/16" ball that comes with the Equal-i-zer system. I recommend using the Sway Bracket Jackets # EQ95-01-5150 to reduce the hitch noise as well as extend the life of the parts. These nylon jackets sit between the trailer bracket and weight distribution bars to reduce metal on metal contact.

The rear springs on the back of your Expedition will vary and the only way to confirm if a product like the Air Lift 1000 Air Helper Springs # AL61792 will fit is to measure your particular springs. You will need to send me the width, height, coil diameter and spacing of your particular springs. With this information I can make a proper recommendation for fitment.

expert reply by: Bud M

0