bing tracking image
  1. Truck Bed Bike Racks
  2. Saris
  3. Fork Mount
  4. Bolt On
  5. 9mm Axle
  6. Compact Trucks
  7. Mid Size Trucks
  8. Full Size Trucks
Saris Traps Fork-Block 3 Bike Rack - Triple Track - 47" Long

Saris Traps Fork-Block 3 Bike Rack - Triple Track - 47" Long

Item # SATRK34-BLK3
lowest price pledge
Our Price: $239.96
Truck Bed Bike Racks

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 10 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fork-mount bike carrier hauls 3 bikes upright in a truck, SUV, or van. Lay the track on the floor to mount your bikes. Rubber pads on bottom prevent sliding. Included traps mounts stagger along triple-grooved track to prevent bike-to-bike contact. Lowest Prices for the best truck bed bike racks from Saris. Saris Traps Fork-Block 3 Bike Rack - Triple Track - 47" Long part number SATRK34-BLK3 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (0)
  • Photos
  • Why etrailer?

Saris Truck Bed Bike Racks - SATRK34-BLK3

  • Fork Mount
  • Bolt On
  • 9mm Axle
  • Saris
  • Compact Trucks
  • Mid Size Trucks
  • Full Size Trucks
  • Locks Not Included
  • 3 Bikes

Fork-mount bike carrier hauls 3 bikes upright in a truck, SUV, or van. Lay the track on the floor to mount your bikes. Rubber pads on bottom prevent sliding. Included traps mounts stagger along triple-grooved track to prevent bike-to-bike contact.


  • Fork-mount bike rack carries 3 bikes in your truck, SUV, minivan, or van
    • Easily adjustable Traps fork mounts allow bikes to be placed in desired location
    • 3 grooves in track allow fork blocks to be staggered so bikes' handlebars don't touch
  • Includes 3 fork mounts, 3 skewers, and mounting hardware
    • Use additional fork mounts (SATR1BLK - sold separately) if hauling more than 3 bikes
  • Easy installation - just lay the rack on the floor
    • Rubber pads on bottom prevent the rack from sliding
    • Can also be permanently mounted to most flat surfaces - even a wall
  • Wheel holders (SAWHL1 - sold separately) let you carry your bike's front wheel on the rack
  • Rustproof aluminum construction
  • Black powder coat finish resists corrosion
  • Made in the USA


  • Carrying capacity: 3 bikes
  • Length: 47"
  • Number of grooves in track: 3
  • Weight: 12.4 lbs (each)
  • Limited lifetime warranty

Saris Traps Fork-Block Track

This bike rack lets you carry your bikes and wheels upright in your truck, van, or SUV. Use with Saris fork blocks to carry bikes and wheel mounts (SAWHL1 - sold separately) to carry your bikes' wheel. Slide each unit along the track to optimize spacing. It's easy to install - just set it on the floor. The bottom has rubber padding that prevents it from slipping and rubber endcaps protect your vehicle from scratches and abrasions.

Fork Blocks and Wheel Mounts

Saris Triple Track Wheel HolderSaris Triple Track Wheel Holder sitting in SUV

Mount Saris Traps fork blocks anywhere along the Triple Track for best bike placement. Place your bikes closer together for the greatest storage area, or further apart for easy access. You can also add a bike wheel holder (SAWHL1 - sold separately) that lets you secure your bikes' wheel upright on the rack without damage to your spokes or disc brakes. Use the included gray thumb wheel to secure the holder to the rack, then place the wheel into the grooves of the wheel holder and tighten down the skewer.

Freestand or Permanent Mount Installation

Saris Triple Track Fork-Block Carrier with Fork Block sitting in SUVSaris Triple Track Fork-Block Carrier with rubber on bottom

The Single Track installs easily - simply set it on the floor. It has a rubber layer underneath that prevents it from sliding around. It can also be permanently mounted on most flat surfaces - even on a wall. There are 3 pre-drilled, recessed holes for permanent mounting (hardware not included).

TRK34-BLK3 SarisTriple Track System for Saris Traps Fork Mount - 47" - Black

Installation Details SATRK34-BLK3 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

Saris Traps Fork-Block 3 Bike Rack - Triple Track - 47" Long - SATRK34-BLK3

Average Customer Rating:  4.8 out of 5 stars   (11 Customer Reviews)

Fork-mount bike carrier hauls 3 bikes upright in a truck, SUV, or van. Lay the track on the floor to mount your bikes. Rubber pads on bottom prevent sliding. Included traps mounts stagger along triple-grooved track to prevent bike-to-bike contact.

2007 Nissan Quest

This works perfectly in my 2007 Nissan Quest minivan.

I am able to securely and rapidly store and transport 3 bikes wile keeping 3 seats usable in the van.

The base is heavy enough that it stays put so that the bikes stay still and do not knock into each other on the trip.

I *might* be able to fit 4 bikes in there, but only if I put down another seat, leaving room for only 2 passengers, so I'll say 3 bikes and 3 people in my minivan is the sweet spot for this.

It really is nice that I can load them so rapidly and that the bikes do not have to touch each other.


the product is very good from a durability stand point. But lacking a bit when it comes to flexibility of design. The platform at which the traps are attached could be further re-designed to include the ability to extend or contract to provide a better fit whether the application will be inside the back of a van or on a truck bed. Also some additional suggestion would be looking at ways to anchor the track when use inside a van or SUV. The price I paid for this product i would consider high because of the lack of versatility in terms of use. Would i recommend it? well if you are looking for a nice looking track with traps this would be your choice. Don't get me wrong the quality is very good I just wish a bit more thought was put into it before pricing it. There are other more economical ways to reproduce what this product can be used for; for a lot lot less.

its still working very well and Have not really been very inventive as to how to use them differently except for getting my tandem inside my Toyota sienna. Yes, a tandem bike fits in a Toyota Sienna with this track assembly. The very good thing about this is since your bike is inside the car there is less worry about theft and you can keep pretty much all your accessories on the bike without the need of removing them. Since the bike is inside the car and under lock and key plus alarm.
Mariano - 06/26/2017

2019 Toyota Tacoma

After one year still love this product! Use it in a 2019 Tacoma Short bed with a leer cover. My bike fits perfectly and is stabilized during travel - so easy to take in and out. Also use the wheel holder which works well. When not using the Sari track its so simple to take out of truck and store.


Received exactly what I ordered and the shipment was on time. Works just as advertised. The perfect solution for transporting bikes in my truck. I couldn’t be more pleased.

2010 Nissan Xterra

Carrier works great in my 2010 Nissan X terra.

Product works great!!
Tim K - 05/18/2015

2015 Toyota Tacoma

Excellent product and well made. Looks great


Review from a similar Traps in Truck Bed Bike Racks

Thanks for the follow up emails. Received my interior saris fork mount carrier and already have people raving about it. Here is a photo for subaru outback 2014 with saris
Thanks again


Review from a similar Traps in Truck Bed Bike Racks

In case you were wondering, YES, the Dirtbag mounts work perfectly with the Saris Trap rack. Actually they couldn't fit better if Saris made them themselves. I purchased some wing nuts to allow the racks to be changed out and moved around much easier.


Review from a similar Traps in Truck Bed Bike Racks

Really love it. Installed in my 2017 Chevrolet Silverado with Leer Cap. I have two Trek Townies I take on camping trips. Bikes are safe secure and kept clean. I mounted the track to the bed of my truck because I felt it stayed much more secure that way. Even with the two bikes installed I have plenty of room for other camping gear.


Review from a similar Traps in Truck Bed Bike Racks

Awesome! Heavy enough that I don't have to bolt it down, and the rubber bottom grips to prevent sliding. I put 3 fork mounts on it with plenty of room to add a 4th if I need to


Review from a similar Traps in Truck Bed Bike Racks

Works really well. I probably should have gotten a wider base as it likes to flip at times.


See what our Experts say about this Saris Truck Bed Bike Racks

  • Does the Saris Traps Fork-Block 3 Bike Rack Included the Three Fork Mounts
    Yes the Saris Traps Fork-Block 3 Bike Rack part # SATRK34-BLK3 does included the three fork mounts. It is 47" wide so as long as your Gladiator has that width in the bed it will work out great.
    view full answer...
  • Will Saris Traps Fork-Block 3 Bike Carrier # SATRK34-BLK3 Fit a 2014 Jeep Grand Cherokee
    The Saris Traps Fork-Block 3 Bike Carrier # SATRK34-BLK3 could be used in the cargo area of your 2014 Jeep Grand Cherokee even though it is not listed as a confirmed fit. The universal fit of this rack allow it to fit basically any vehicle that has room for it and the bikes.
    view full answer...
  • Can the Saris Traps Fork-Block 3 Bike Carrier Mount to a 2 x 6 Board Instead of the Truck Bed
    The Saris Traps fork-block 3 bike carrier # SATRK34-BLK3 you referenced can be mounted on a 2x6 board instead of the truck bed. I called our representative at Saris to confirm as well. I added a informative article about truck bed bike rack systems for you too.
    view full answer...
  • Width Dimensions of Saris Single Track Versus Triple Track
    The Saris Traps Fork-Block Bike Carrier Base - Single Track - 47" Long # SATRK14 has a width of 3 inches. The Saris Traps Fork-Block Bike Carrier Base - Triple Track - 47" Long # SATRK34 has a width of 7 inches. The fork block # SATR1BLK is available separately. I've attached a couple of photos to assist. The Triple track is also available in a 35 inch length # SATRK33. There are options that include 3 fork blocks: # SATRK34-BLK3 # SATRK14-BLK3 # SATRK33-BLK3
    view full answer...
    Image 1 for Image 2 for
  • How to Tell if Saris Traps Bike Racks Are Compatible with a 2015 Mazda CX-5
    The Saris Traps Fork-Block Triple Track 3 Bike Racks are great for hauling bikes in the back of a pickup, van, or SUV (like your 2015 Mazda CX-5), but since this is a universal application you'll need to take some measurements at the cargo area of your 2015 Mazda CX-5 to see if the 35" # SATRK33-BLK3 or the 47" # SATRK34-BLK3 length will fit better. You'll also want to try taking off the front wheel of your 50cm road bike and see if it will fit comfortably in your CX-5. The forks will...
    view full answer...
  • Bike Rack Solution for Truck Bed of 2019 GMC Canyon with Tonneau Cover
    The Inno Velo Gripper Bike Rack # INRT201 that you referenced can't install with a tonneau cover also installed. The rails of the cover would prevent this from being able to install. What you could use is the Saris Traps Fork-Block 3 Bike Rack # SATRK34-BLK3 attached to the floor of your truck bed for a way to carry up to 3 bikes.
    view full answer...
  • Will the Kuat Dirtbag Fit Saris Traps Triple Track
    You could use the Kuat Dirtbag # DRT15 with the Saris Traps such as # SATRK34-BLK3. You would just need to obtain some hardware locally that is compatible with the Saris Traps.
    view full answer...
  • Will the Saris Traps Fork-Block Bike Rack Hold Through Axle Bikes
    Saris Traps Fork-Block # SATRK34-BLK3 is designed to hold bikes with 9mm axles but not through axle bikes but we do have several truck bed bike racks that will accept through axle bikes, see link. One of the more popular options is the Kuat Dirtbag # DRT15. I have included a link to a video of this product for you.
    view full answer...
  • Truck Bed Bike Rack Recommendation for a Truck with a Tonneau Cover
    I have a solution for you, but you would not be able to use a Yakima BikerBar bike rack part # Y01141 with a tonneau cover like the Truxedo LoPro QT # TX569101 that you referenced. Instead you would want a bike rack that attaches to the floor of the truck bed so that it does not interfere with the cover like the Saris Traps Fork-Block 3 Bike Carrier # SATRK34-BLK3.
    view full answer...
  • Fit of Saris Traps Fork-Block 3 Bike Rack SATRK34-BLK3 in 2019 Tacoma Short Bed with Leer Cap
    Your Leer cap's window clearance when your bikes are stowed depends on exactly where you place the Saris Traps Fork-Block 3 Bike Rack # SATRK34-BLK3 and on the exact overall length of your bikes. You can check this by removing the bikes' front wheels, rolling them into the bed rear-wheel first and seeing where the forks and handlebars end up. The wheel holder # SAWHL1 is designed with some offset; this means the stowed wheel will lean to one side of the holder rather than be dead center....
    view full answer...
    Image 1 for
  • How to Carry an e-Bike and a Recumbent Trike with a 2014 Ford F-150
    I have a solution for you to transport your bikes with your 2014 Ford F-150 but we will have to get creative as the only solution that would be close is something like the Saris Traps Fork-Block 3 Bike Rack # SATRK34-BLK3, but I'm pretty confident the braking systems on your bikes aren't compatible with a fork mounted rack like this. I recommend using a hitch mounted bike rack for your e-Bike like that Saris Freedom # SA4412B which is compatible with 60 lb bikes that have a max wheelbase...
    view full answer...
  • Will the Rocky Mounts DriveShaft fit on the Saris Fork-Block
    I have a great solution for you but unfortunately the RockyMounts DriveShaft Track Truck Bed Bike Rack part # RKY1086 will not work with the Saris Traps Fork-Block 3 Bike Rack part # SATRK34-BLK3 . The DriveShaft is designed for track systems in truck beds and has an area that extends past the connecting edge of it and it would not sit flush or flat on the Traps. Instead I like the RockyMounts DriveShaft HM Truck Bed Bike Carrier - Thru-Axle Mount part # RKY1084. This will give you all...
    view full answer...
  • Retractable Tonneau and Track System Bike Racks for my Ram Rebel 2020 with Ram Box 5.5' Bed
    We have a really nice retractable tonneau available for your 2020 Ram 1500 with the Rambox and a 5.5' bed. The Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black part # 311-M-JRDA32A63. This cover has been a really good one for a friend of mine who has had it on his 2018 Silverado 1500 for two years and really likes it. It will retract and store getting it out of the way for those bikes. Another huge plus is that the cover can be secured every 12"...
    view full answer...
  • Recommendations For Carrying 3 Bikes And A Trike On 2010 Mazda CX-9
    The trailer hitch I recommend for your CX-9 is the Curt Trailer Hitch, part # 13575. This is a Class lll hitch and it has a 2 inch receiver opening. I have attached a link to an installation video for this hitch on a 2010 CX-9 you can check out. Carrying 3 standard and one 3-wheel trike is going to be difficult. Although costly, I recommend a hitch-mounted carrier like the Hollywood Racks Sport Rider SE2 Trike Carrier, part # HR1450Z-E-TRKADP3. This will carry the trike and one additional...
    view full answer...

Do you have a question about this Truck Bed Bike Rack?

  • Why

    At we guarantee:
  • Highest quality truck bed bike racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate truck bed bike rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee David L
Written by:
David L
Employee Jacob T
Video Edited:
Jacob T
Employee Colin H
Installed by:
Colin H
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Jon G
Test Fit:
Jon G

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924