Video Transcript for Feature Review Piranha LED Trailer Clearance or Side Marker Light w/ Reflector

Today, we're going to take a look at the Piranha LED trailer clearance or side marker light with reflector. Now, this is an important component to have on your trailer to make sure that you're visible, even at night, and even if your trailer is parked somewhere, you want to make sure that people can still see it. You'll see our reflector there makes it easy to spot. And then, we'll also have our light itself. We plug in our two wire prong, this is sold separately. You can find it here at etrailer.com.

Then our light turns on there, and we'll be seen.This has four diodes, so one, two, three, four, and it's P2 rated. Basically, that means that from the side, we'll be able to see it at about a 45 degree angle in either direction. So, if you want to use this as a side marker light, it's only going to be good for that side, and if you want it for a clearance light, you'd have to get another one. Basically, if you think of a corner, this isn't going to reach around the corner, it's only going to be for one side of it.As far as our dimensions, the light is about 2 and 1/2 inches in diameter and about 15/16ths deep going from the face of our light to the little prongs on the back, or just under an inch. You can also pickup a grommet to go with this light to give it a little bit of road shock protection.

Kind of finishes the look of the light, and this will actually hold the light in place if you put it in to a three inch diameter hole, since it has this little lip to hold it in place, and that still allows our wiring to come through. Now, this is sold separately using part number 142-1A, and you can find that here at etrailer.com, as well.Our light, again, is P2 rated, DOT compliant, and made in the USA, and the LEDs have unlimited lifetime warranty from Peterson. And that's going to do it for our look at the Piranha LED trailer clearance or side marker light.