Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
No more dim bulbs or constant replacements. This 2" round LED light uses ten white LEDs behind an amber lens to put out a bright, even glow while drawing very little power. Because it’s LED, it lasts up to 50 times longer than an old incandescent light and never needs a bulb change. It’s fully compatible with 12V DC systems, so it runs efficiently without adding strain to your wiring.
If your trailer ever gets wet or goes underwater, this light is built for it. The housing and lens form a sealed, waterproof unit that keeps water out of the circuit board and diodes. It’s dependable anywhere moisture might sneak in—from rainy roads to full submersion at the ramp. The durable polycarbonate lens also holds up against knocks and road debris for long-term reliability.
Visibility is key for safety, and this light’s P2 rating means it shines with a controlled 90-degree beam pattern—45 degrees to each side of center. That’s ideal for use as either a clearance light or a side marker light, making your trailer easier to see from the right angles while staying DOT compliant.
Mounting doesn’t have to be complicated. This compact 2" diameter by 7/8" thick light fits neatly into a recessed grommet mount (sold separately) for a clean look that stays out of the way. It connects with an industry-standard 2-prong plug, so wiring is quick and straightforward with no guesswork or custom fittings needed.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this LED side marker or clearance trailer light. This is a DOT compliant two inch diameter round trailer light that will serve as either a clearance or a side marker light. This is P2 rated so it is going to produce a 90 degree beam pattern so 45 degrees on either side of the center line. So this can work as either a side marker light or a clearance light, but it won't be able to do both at the same time so you wanna make sure that you're mounting it in the appropriate location. This does have a sealed housing and polycarbonate lens that's going to provide nice durability and ensure it's going to be waterproof for you.
So you can put this on a boat trailer. We do have the amber lens over these tin white LEDs and those LEDs are gonna be great, if you're not familiar with the difference between LEDs and incandescence, the LEDs last about 50 times longer because there's no brittle filament like with your incandescent lights, so you're not gonna have to replace the bulbs and they are gonna be more efficient so they provide brighter light with less power output. Now this is gonna be compatible with your 12 volt DC system. It accepts the industry standard two prong plug. It is right about 7/8 of an inch thick and it is compatible with the grommet so that it can be recess-mounted and that grommet is sold separately but you can find it here at etrailer.com, should be a product listed on the product page as a related product for this.
So if you are wanting to replace a side marker or clearance light for your trailer, then this is gonna be a great option for you. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
6/10/2022
No hardware is included. Pop the lens off, hardwire your wires, install with self tapping screws, then replace the lens.