2-1/2" Diameter round. Waterproof, LED trailer light functions as a clearance or side marker light. Pirhana series combines modern design with vibrant lighting. Recessed mount with grommet (not included). Accepts standard 2-prong plug. P2 rated.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck-Lite # 1050A
Grote # 47123
Optronics # MCL57AB
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number 162A. This is the Peterson LED 2-1/2" Round Amber Trailer Clearance Light. The LED says seems we have a life expectancy of about 100,000 hours. It's going to contain a three diode, or three LED design. LEDs are going to be great replacement for incandescent lights. They're going to last longer. They're going to burn brighter, and they're going to be much more efficient.
You don't have to worry about replacing the bulbs, and you don't have to worry about brutal filaments. It's got the nice amber lens with a white base. This unit is sonically sealed for water proof design. The LED lights are going to use 1/10 of the electrical current needed to operate when compared to standard bulbs. This does operate between nine and 16 volts. We'll take a look at the overall diameter of the light.
It's going to give us the measurement of about two and a half inches. The depth, measuring just the lens. That's going to give us a measurement of about 13, 16, 7 inch. Here on the back side is our connection point for our wiring. This is designed to accept your industry standard two prong plug.
It's also designed to be mounted with a grommet. The grommet and the pig tail plug, are going to be sold separately. You can find those on our website using part number 162-18K. This unit is Department of Transportation compliant. We're going to go and hook it up to an external power source, that way you can see what it looks like with power running through it. I have a two prong plug here.
We're simply just going to place it into the female port on the back. Give it a good push so it sits right into the housing back there. You can see here, it sends out a really nice clear, consistent signal. The amber lens sends a lot of lights come through. It's going to contain three LEDs. The multi-diode design is really going to help optimize our light output. Again, this is designed to be used as a trailer clearance light. That's going to do it for our review of part number 162A. This is the Peterson LED 2-1/2" Round Trailer Clearance Light. .
Average Customer Rating: 4.8 out of 5 stars (235 Customer Reviews)
2-1/2" Diameter round. Waterproof, LED trailer light functions as a clearance or side marker light. Pirhana series combines modern design with vibrant lighting. Recessed mount with grommet (not included). Accepts standard 2-prong plug. P2 rated.I used these as replacement lights for my box trucks. These are brighter than the original lights, and as they are LED, I expect them to last much longer as well. The price was also very good.
Works great, the only reason for 4 stars is there was a sticker on it that left residue behind and was a pain to remove! All of the other led lights I ordered did not have stickers on the lens, I suggest you don't put them on these!
A perfect direct replacement for the older incandescent PM 142.
Good Product correctly shipped, no issues with the product. The order was a little messed up due to a incorrect grommet assembly for the light. CS is working to resolve the issue.
This light fits perfectly and is working just fine.
These look great at night and during the day. It gives our work trucks a nice touch.
Great light at a great price!
Great service. Quality product and fast shipping.
Not sure its anyones fault but the LED marker lights on my trailer fasten to the wall with screws and today that style is not made as it was in 2017...So i am rating the lights "average" cause till i open the light up without busting it I got to make it work and your lights are just the same as the rest...lights look fine and i will let you know how it works out...
Order 2 of theses paid extra for shipping , and they don't match each other dame part number , tried to return them wad going to cost me more thank just keeping the wrong parts does not match pictures on website
Exact replacement for my trailer. The factory incandescent bulbs had faded and connections were failing. With a quick inspection with a multi meter I found that all the lamp bases checked out.
I installed this Amber and Red marker lamps through out the whole trailer. I now “glow” going down the road at night. I highly recommend these replacement lamps.
Better than the ones that came with the trailer.
Your products have never failed me…Been doing business for years….However, beyond your control, usps shipping is ridiculous….10 days from ordering to delivery…glad I wasn’t in a hurry!
I think etrailer should have sent plugs with lights!
Excellent service as usual. Always great service and great products.
Perfect for the job. Easy install, bright light, everything you need.
These lights were the perfect brightness, very rugged, and easy to install inside protected areas of the frame on the updated raft trailer. etrailer has great selection, the website makes it easy to find the best parts for the job, and their communication is excellent. Their videos and reviews are invaluable.
The 168R side marker light paired with the B168-18 mounting gasket were easy to mount and work perfectly.
I was looking for a certain size to fit the existing cutouts on my trailer and I was able to find the one I needed because you guys listed the size. Great idea.
Will fit my application well, like the grommet. Not as bright as I had hoped but good. Great service prompt professional.
Excellent service, unfortunately I ordered the wrong base and correct lights.
It’s perfect as I ordered it , arrived very fast and as advertised, awesome lights will buy again.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.