bing tracking image
  1. Trailer Lights
  2. TecNiq
  3. Clearance Lights
  4. Round
  5. LED Light
  6. Red
Mini Clearance/Side Marker Light w/ Grommet - Submersible - Red LED - Red Lens - 0.180" Bullet
TecNiq

Mini Clearance/Side Marker Light w/ Grommet - Submersible - Red LED - Red Lens - 0.180" Bullet

Part Number: TN38MR
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$6.49
Trailer Lights
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. PC rated. 9" Long pigtail has 0.180" bullet connectors. Great Prices for the best trailer lights from TecNiq. Mini Clearance/Side Marker Light w/ Grommet - Submersible - Red LED - Red Lens - 0.180" Bullet part number TN38MR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (111)
  • Q & A (0)
  • Videos (1)
  • Photos

TecNiq Trailer Lights - TN38MR

  • Clearance Lights
  • Round
  • LED Light
  • Red
  • 1 Inch Diameter
  • Recessed Mount
  • Side Marker
  • Submersible Lights
  • TecNiq

Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. PC rated. 9" Long pigtail has 0.180" bullet connectors.


Features:

  • Small, round LED light serves as a rear side marker and clearance light for your trailer
  • PC-rated light produces a 180-degree arc of amber light to indicate the position of your trailer
  • Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens
    • Military-grade construction of circuit board
    • Urethane potting offers better protection than common epoxy potting
  • Premium LED is energy efficient, long-lasting, and vibration resistant
    • Rated for up to 100,000 hours of operation
  • Red lens over red LED
  • 12V DC compatible
  • Recessed-mount installation with included grommet
    • Requires a 3/4" diameter cutout
    • 0.180" Bullet connectors plug into your trailer's matching connectors
  • Meets or exceeds FMVSS 108 standards
  • Assembled in the USA


Specs:

  • Dimensions: 1" diameter x 7/8" thick
    • Dimensions without grommet: 3/4" diameter x 7/8" thick
  • Diodes: 1
  • Input voltage: 9V - 14V
  • Power draw: 0.06 - 0.08 amps
  • Wire length: 9"
  • IP rated: 68
  • Limited lifetime warranty


TecNiq S34 PC Rated Miniature Side marker Light Dimensions

Sealed, Waterproof Trailer Light

Maintaining a functioning lighting system for your boat trailer is required by law. Make your life simpler by installing lights that you can trust be to be submerged regularly. The housing and lens of this light are sealed together to create a single unit, which means that water will not get into the light to damage the diode or circuit board. Also, a special urethane potting is used to encapsulate the circuit board, further ensuring protection from moisture and dust.


PC-Rated Lights

Diagram of light spread for PC rated light

A PC-rated light produces a 90-degree angle of light on either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.



S34-RR9B-1 TecNiq Red Mini LED Side Marker - Clearance Light - PC Rated - Red Lens - 9" Wire - 0.180" Bullet





Video of Mini Clearance/Side Marker Light w/ Grommet - Submersible - Red LED - Red Lens - 0.180" Bullet

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Feature Breakdown: Mini Clearance/Side Marker Light w/ Grommet

Hi everybody. Andy here with etrailer.com. Let's take a look at this Submersible Red LED Mini Clearance or Side Marker Trailer Light. With this little one inch round, waterproof LED mini trailer light, you're going to be able to haul safer by alerting other drivers of your trailer's position and direction of travel. As you can see, I already have this connected to power. You can see just how bright it is with my bright studio lights on.

But let me go ahead and turn my studio lights off here real quick, just to give you a better idea of what this is going to look like in darkness and can just see the light on my table here. Let me zoom out real quick just so you can see it at a distance. So this light's going to function as both a clearance and rear side marker light when properly mounted. This one red LED underneath a red lens is rated for up to 100,000 hours of operation. It is energy efficient, long lasting and vibration resistant.

Now this is a PC rated light, meaning it produces a 90 degree angle of light on either side of its center line for a total of 180 degrees of coverage. The beam pattern can be clearly seen when you are standing directly in front of the light as well as when you are standing on either side of the light. Rather than buying side marker and clearance lights separately, you can mount this single PC rated light at a 45 degree angle on the rear corner of your trailer to act as both. This sealed waterproof light includes a durable, polycarbonate housing and UV resistant lens. The circuit board is of a military grade construction and the urethane potting offers a better protection than common epoxy potting.

This has an IP rating of 68. This is 12 volt DC compatible. As you can see, it's a two wire pigtail with a 0.180 male bullet ends. And I measured the wire earlier before our time together, and from the end of the plug all the way behind the light here, we're sitting at about 11 and a half inches of length. So this is a recessed mount insulation with an included grommet and insulation does require a three quarter of an inch diameter cutout.

Let me pull out my ruler here real quick and just give you the measurement of the overall thickness. As you can see, we're sitting right at seven eights of an inch. And if you are looking for additional measurements that I did not cover with you today, on this product page, we do have a diagram with some other measurements that you might find helpful. And this is going to meet or exceed FMVSS 108 standards and this does have a limited lifetime warranty. Well, that's going to wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.


Customer Reviews

Mini Clearance/Side Marker Light w/ Grommet - Submersible - Red LED - Red Lens - 0.180" Bullet - TN38MR

Average Customer Rating:  4.7 out of 5 stars   (111 Customer Reviews)

Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. PC rated. 9" Long pigtail has 0.180" bullet connectors.

by:

Great quality product and fast shipping



by:



by:

The RV clearance light are much better than original ones. They are brighter and set closer to the surface. I replaced 2, 1 red and 1 amber and they fit perfectly. Wire color code was different, but just touch wires together and if it lights connect it.



by:

a fun little project, I put new tail lights on my trailer and found out I had one bad wire , so I pulled new wires and added these onto my Roller guides , look really nice!



by:

Lights worked great. etrailer rep that I talked to helped me get the exact lights that I already had on the trailer



by:

I would definitely recommend purchasing! These are my favorite style of side marker lighting, small but bright.



by:

Would definitely purchase again! These are my favorite style of side marker lighting.



by:

These mounted cleanly in the fenders with in the provided rubber grommets, making them nearly flush with the surface, yet has 180 degrees of light. I wired them into the existing running lights and are BRIGHT, day and especially at night! Now, I can see the where the trailer is when backing. Submersible too, which is a terrific bonus. I discovered that unlike most LED lamps I've used, these must be connected black to positive and white to ground. I did not find this small detail in the description, or the video which shows connecting to two alligator clips which were both black. This needs to be clearer, but overall, ETrailer has done it again, with items we need to keep things usable and safe.



by:

These LEDs are an exact match for my SportTrail trailer (custom for a 26' center console). They are MUCH cheaper to purchase from here than direct from SportTrail.



by:

I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.

But lucking out there was no breakage.

I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.

Consider me happy



by:

Work great. I installed three in back of boat trailer. Been working even when backing boat in and out of the water.



by:

I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.

But lucking out there was no breakage.

I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.

Consider me happy



by:

I replaced a Tail Marker on my flatbed truck. This one was was exactly like the existing lights and matched perfectly.



by:

Great quality lights,,, will be putting them on the trailer tomorrow.



by:

Would definitely purchase again! These are my favorite style of side marker lighting.



by:

There were no grommets in the package.



by:

Lights are awesome.



by:

These little lights are bright and perfect for a 3/4" hole. Easy to install and wire up.



by:

Had an issue with my order. This was corrected immediately. Great customer service!



by:

This works perfect, I'm very happy with this marker light. Thank you.



by:

WAS EASY TO ORDER OFF OF SITE AND SHOWED UP WHEN STATED. WILL BE USING THIS SITE A LOT MORE.



by:

As always Etrailer has a great selection of parts and great service.



by:

Parts were as descibed at a great price and arrived in a timely manner.



by:

Fast service, very pleased.



by:

I’ve always gotten good service and products from E Trailer


25
87
Show More Reviews

See what our Experts say about this TecNiq Trailer Lights


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Justice A
Updated by:
Justice A
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924