etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98856
Retail:$156.90
Our Price: $121.58
You Save: $35.32
Confirmed to Fit
2014 Jeep Wrangler
with standard factory bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (434)
- Q & A (0)
- Photos
2014 Jeep Wrangler - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- 2 Inch Hitch
- Class III
- 5000
- No Cross Tube
- etrailer
- 500
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch bolts onto your Jeep Wrangler's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Overall length of receiver tube: 9"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98856 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Replaces e98835
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Tech Tip
Hitch receiver tube is longer than the other etrailer hitches and will extend farther out from the vehicle so accessories such as bike racks and cargo carriers extend past the spare tire. No drilling required for installation , Exhaust must be temporarily lowered for installation , Tow hooks, if present, will be permanently removed , Any obstructions on the cross member, such as excess welding, will need to be removed for installation
Complete Towing Package for 2014 Jeep Wrangler
Retail:$228.34
Package Price:$196.63
2014 Jeep Wrangler Owners Who Purchased This Trailer Hitch Also Bought...
Popular Wrangler Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98856
Average Customer Rating: 4.9 out of 5 stars (434 Customer Reviews)
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.by: Thomas02/23/2022
Excellent product, poor installation instructions. I have included the photo of the part that had to be removed before I could install the hitch - despite emailing prior to purchase to ensure an exact fit, there was no instruction to remove that part. Once that part was removed, fit was perfect. No need to temporarily remove exhaust, despite recommendation in directions. The vehicle is brand new, Rubicon 4xe. I will only use the hitch for a bike or luggage carrier, but it is heavy duty and would handle more that the Jeeps towing capacity
Thomas M.
2/24/2023
Product is working great - heavy duty enough to tow a 3,500 pound little camper. Towing limitation is the Jeep, not the hitch!
by: Rich 04/10/2024
2021 Ford F-150
The hitch is well-made and fits perfectly. I needed to drop the muffler to complete the installation as the bolts could not be fed into the holes. The videos mention that that probably wouldn't be necessary. I needed to find a video on YouTube showing how to drop the muffler. This install was made a little tougher crawling under the jeep and squeezing into the tight spaces. I used a motorcycle jack to hold the hitch in place while I got the bolts in. If you have access to a lift the installation would be a breeze. The install took less than an hour even with the extra steps.
by: Ronald11/12/2023
2022 Jeep Wrangler Unlimited
I read the reviews paying close attention to the fact that I had a Jeep Wrangler with the tire on the rear. I chose this one because it said it would fit and allow bike racks with the tire in place. Item arrived and I easily installed it with no effort at all. Nothing had to be removed unlike the instructions. The picture below is minutes after installation. My Thule 4-bike rack would not slide into place as it was not long enough of a mount which is contrary to what the description said. I reached out to etrailer and was told that I could purchase an extender for $XX dollars more than what I bought the mount for. I contacted a local trailer supply store that had an extender for a lot less money and now it works......
by: Mike 03/25/2023
Jeep
You can only use two new bolt sets that come with kit, 2020 Jeep Sahara has extra plate that bolts need to be removed and reused along with two new bolts sets.
Mike
3/26/2024
Working perfect
by: Harold 04/17/2024
Etrailer is very reliable. I have had nothing but good service and our products always arrive timely and when expected. I highly recommend e trailer to anyone looking for great service.
by: Roger10/11/2019
2018 Jeep JK Wrangler
I needed a hitch receiver that would fit my 2018 Jeep Wrangler JK and extend far enough that I could use by Kuat Sherpa 2.0 platform bike rack and clear the spare tire. This hitch worked perfectly and was an easy install.
Roger
10/12/2020
Exactly what I needed. I have used on many times and could not be more pleased with the hitch
by: Scott G.01/20/2024
I wish I could provide a product review. But I was unable to install it given the mounting holes didn’t line up and are out of tolerance to my Jeep mounting holes. I tried to physically return it given I’m only a short drive away and I was told no in-person returns. And it made no sense for me to ship it back when I’m only 30min away. Crazy. About the most inefficient process I’ve ever heard. So, it sits in my garage……
by: Hugh 05/25/2024
Hitch arrived in a few days. Looks great. Not installed yet.
by: Andrew 04/21/2024
Super easy to install. Looking forward to ordering additional accessories to maximize this product.
by: Dallas 02/08/2024
2019 JeepWrangler
Great fit on our 2023 Wrangler Rubicon. I was able to perform the install without removing the exhaust like stated in the instructions.
by: Doug 01/04/2024
JeepWrangler
Quality product, very well made and fit perfectly on my 2021 Wrangler JL frame. Prompt delivery with shipping updates along the way. The parts bag was ripped open (during shipping I presume) but all the parts were in the box rattling around. The box itself was in perfect condition thank goodness!
by: Glenn 01/27/2024
2020 JeepWrangler
Have not installed it yet but looks to be a perfect fit. Very nice finish, matches the stock steel bumpers nicely.
by: Frank08/10/2019
2018 Jeep JL Wrangler Unlimited
Once I figured out the alignment of the bolts it was simple. The 2018 JL has two bolts and a bracket that are already there. U loosen, slide the hitch between the bracket. I reused the 2 stock bolts and used the 2 new bolts. Looks great! Total time for install about 40 mins with torque n the bolts. Havent used it yet but will let u know if there are any issues.
Victoria B.
8/14/2019
Some models will have existing hardware and a spacer installed in the hitch installation location. If your Jeep has these parts, you will want to remove the bolts and spacer, keeping the bolts for re-installation with the trailer hitch.
by: Gary04/16/2022
2021 JeepWrangler
Overall excellent product. Heavy duty, nicely finished and top-notch hardware. Instructions need updating. There are supposed to be 4-holes in the Jeep frame to mount this hitch. There are, but 2-are used by the bumper plate. Had to figure it out myself. Removed the 2-bolts, spread the plate away from the frame to allow the hitch to slide up over the frame. After that, no problem.
Gary
4/17/2023
Great. No issues. Working as intended.
by: Dawn08/07/2022
Works great with my 2021 Wrangler Sport. Gives decent clearance past the spare tire. Some rust spots already after one year that need to be touched up, but that’s what salted roads do to stuff in the northern states. Of course, I added the flag plug for extra bumper appeal.
by: Chris05/29/2023
Nice hitch. the install took about 30 mins on a 21 Sahara including getting tools out and putting them back.
The instructions are not overly clear about the bumper support that needs to be slid out so that the hitch can be install behind it. the instructions should read If this model has a bumper support installed where this hitch is to be installed. remove and reuse the factory 18mm bolts. Loosen the two 10mm bolts to slide the bracket forward enough to install the hitch, re-tighten once the hitch is installed. It should also show a diagram or picture in the instructions.
There is absolutely no need to mess with the exhaust - there is plenty of room to do the install with the exhaust in place.
Past the instructions - this is a nice hitch. the paint seems very nice and it seems to be made well. the welds look good and the 1/4"plate frame seems very stout. Its nice you don't have to remove or cut anything to do this install. Its also great to see quality SAE hardware vs the metric junk including in so many things now a days. This seems like a quality hitch.
by: Kathleen03/26/2020
Received the hitch in the morning, we installed it that afternoon. After watching an installation video from the etrailer website, my husband installed the hitch on my 2020 Jeep Wrangler JLU. It took him about an hour to complete. We bought the extended length hitch. The product fit perfectly and no need to remove the muffler.
by: Mark of KI07/29/2019
Like mentioned in previous posts, on my 2019 Moab, the two outer bolt holes have an L bracket attached already. The nuts are welded onto that bracket so no need to put a wrench on those. Slip the hitch between the steel and that bracket using the same two bolts (18mm) you just removed as well as two bolts and nuts supplied (3/4”) for the inner holes. Once again as mentioned by others, I didn’t need to move the muffler and the rubber mallet worked great to tap the hitch to line everything up perfectly.
Love the matte finish. Great quality.
by: Ken 05/22/2024
Easy to install. Went on in 20 minutes.
by: Jerry 10/19/2023
Jeep
We purchased this second hitch for our new jeep because we were so impressed with the first. Easy to install and very well built!
by: Edward 11/29/2023
A great hitch. Easy to install.
by: Robert09/12/2020
2020 Jeep Wrangler Unlimited
Great trailer hitch. Easy to install. The video on line was a great help as it tells you how to install and what you might run into as having to clear out the holes that the bolts run through. only added a few minutes to the job. Shipping was fast.
by: Tess08/13/2023
Exactly what we wanted, hitch was very easy to put on. Very quick arrival. We ordered a wrong harness snd customer service was very quick and courteous to help us get a return label.
Would highly recommend this company.
by: Joel 08/30/2023
Installation is close, if not a match, to the OEM product. With a little skill, there is no reason to drop the muffler.
25
434
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Recommended Trailer Hitch Receiver & 4-Way Vehicle Wiring Harness For a 2024 Jeep Wrangler UnlimitedI recommend installing our etrailer Trailer Hitch Receiver # e98856 on your 2024 Jeep Wrangler Unlimited. This receiver as a matte black finish which will match well with the fascia and bumper on your Jeep. It also has an extended receiver built in which makes attaching trailers and hitch mounted accessories easier with the added length. You will want to install the T-One Vehicle Wiring Harness # 118786 so you will have the commonly used 4-way flat connector. This will allow you to connect...
view full answer... - Trailer Hitch Receiver Recommendation For a 2017 Jeep Wrangler Unlimited Rubicon 4 DoorI recommend the etrailer Trailer Hitch Receiver # e98856 for your 2017 Jeep Wrangler Rubicon with the factory steel bumpers. It will bolt to the existing bolt holes in your bumper beam. The longer length of the receiver shaft will better fit under your longer bumper to allow you to have easier access and better fit with your ball mount or other hitch mounted accessories. The Tekonsha T-One Vehicle Wiring Harness # 118416 is a plug and play style connector to give your Jeep a 4-way flat...
view full answer... - Swing Away Bike Rack for 2020 Jeep Wrangler UnlimitedThe Thule Apex Swing XT 4 Bike Rack # TH9027XT fits most Jeep Wrangler's with spare tires. The Apex is the updated version of the Vertex Swingaway. The distance between the center of the hitch pin hole and the closest part of the bike rack that would make contact with the spare tire is 8.8". Some hitches on the Jeep Wrangler don't stick out very far and would create clearance issues. If the center of the hitch pin hole to the outer most edge of your spare tire is greater than 8.8" on your...
view full answer... - What Hitch Extender Do I Need to Clear a 35/1250/17 Spare Tire on a 2016 Jeep Wrangler Unlimited?The tire width of a 35/1250/17 spare tire is 12-1/2 inches. If you have a hitch receiver that like the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98856 that sits flush with the end of your 2016 Jeep Wrangler's bumper, I recommend the Curt Hitch Extender for 2" Trailer Hitches - 14" Long # C45795. The 1-1/2 additional inches of the 14-inch extender will allow you to attach accessories without interference. It must be noted that any time you use...
view full answer... - Recommended Trailer Hitch and Class Ratings for a 2016 Jeep WranglerThe trailer hitch class ratings for passenger vehicles use numeric values, not aliphatic. These values include Class I, Class II, Class III, Class IV, and Class V. The trailer hitch options for a 2016 Jeep Wrangler (All Models) are class III, the etrailer Trailer Hitch Receiver part # e98856 is what I recommend.
view full answer... - Recommended Trailer Hitch Receiver And Trailer Brake Controller For 2020 Jeep Wrangler UnlimitedWe have exactly the parts you are looking for. First for a trailer hitch receiver I recommend the etrailer Trailer Hitch Receiver # e98856 which offers a maximum tongue weight rating of 350lbs, and a maximum trailer weight rating of 3500lbs. I check in the owner's manual for your 2020 Jeep Wrangler Unlimited Rubicon and the towing capacity is based on your drivetrain the maximum towing capacity of your vehicle is between 2000lbs - 3500lbs. You will want to check your owners manual to confirm...
view full answer... - Trailer Hitch Receiver and Wiring For a 2020 Jeep Wrangler I recommend the etrailer Trailer Hitch Receiver # e98856 for your 2020 Jeep Wrangler. This receiver has an extended receiver tube that will allow your hitch mounted accessories to clear your spare tire. It features a matte black powder coat finish that will match the factory styling. The T-One Vehicle Wiring Harness # 118786 will provide you with a 4-way flat connector. This connector will allow you to control the tail lights on most small trailers. It will also power Auxiliary Lights...
view full answer... - Parts Needed to Install 4-Way/7-Way and Brake Controller 2020 Jeep WranglerWe have everything you'd need to install both a 4-way and a 7-way plus a brake controller in your 2020 Jeep Wrangler. First you need to start with a 4-way like part # C56407 which is custom fit for your vehicle. Next you'll need the part # ETBC7 which converts the 4-way to a 7-way and also has a 4-way option on side of it. Then you can install a brake controller like our very popular Brake EVN # TK63VR which senses how hard you apply the vehicle brakes and applies the trailer brakes in...
view full answer... - Will The Hollywood Racks SR2 Bike Carrier Interfere With My Backup Camera On My 2016 Jeep Wrangler?Spare tire bike racks like the Hollywood Racks SR1 2-Bike Carrier - Spare Tire Mount # HRSR1 that you mentioned, will require you to have to remove your backup camera for installation. The only way around this is to use a hitch mounted bike rack like the: -Kuat Beta Bike Rack for 2 Bikes - 2" Trailer Hitches # B202-2. If you don't have a hitch already, you can use the etrailer Trailer Hitch Receiver # e98856. The Kuat Beta bike rack has a maximum carrying capacity of 40-lbs per bike,...
view full answer... - Will etrailer Trailer Hitch Receiver Fit 2023 Jeep Wrangler SaharaYes, the etrailer Trailer Hitch Receiver # e98856 will fit your 2023 Jeep Wrangler Sahara. This hitch bolts onto the rear bumper beam for a simple installation. Based on what other Sahara owners have said, you will likely find an extra plate with existing bolts where the hitch installs. Remove the plate and bolts, put the hitch into place, then add the plate back and use the pre-existing bolts along with the bolts from the hitch to finish the installation. If you plan on towing, you will...
view full answer... - What is Dimension Difference Between Draw Tite and Curt/etrailer Hitches that Fit 2022 Jeep WranglerHey Steve, so between the hitches that fit your 2022 Jeep Wrangler Sahara the etrailer part # e98856 and the Curt # C13392 have the exact same dimensions, and the Draw Tite part # DT78MR is slightly different. The only real difference is the length of the hitch tube. The Curt/etrailer sticks out a little further whereas the Draw Tite is a litte more recessed. From the end of the hitch tube to the first mounting flange the Draw Tite sticks out 6-1/2 inches whereas the Curt/etrailer has...
view full answer... - Trailer Hitch for a 2024 Jeep WranglerYes, the etrailer Trailer Hitch Receiver # e98856 will work great with your 2024 Jeep Wrangler. This trailer hitch has a maximum weight capacity of 3,500 lbs, a 350 lb tongue weight capacity, and is made in the USA.
view full answer... - Parts Needed to Flat Tow a 2022 Jeep Wrangler and Add a Hitch and 4-way Wiring to the JeepWe have the parts that you need to set up your 2022 Jeep Wrangler for flat towing and to get it set-up with a tow package. But the wiring will not work the way you are hoping. The 4-way connector on your Jeep will be located at the back by the hitch and will allow you to have lights on a trailer when you are towing one with the Jeep. The connector to go to the 7-way on your motorhome will be at the front of the vehicle and allows your motorhome to tie into the Jeeps lights when flat towing...
view full answer... - SportRack Spare Tire Mount Bike Rack Will Not Clear Oversized Spare Tire on 2011 Jeep WranglerThe Saris "B" plate for their spare tire mount bike racks is not a confirmed fit for the SportRack bike rack. Your best option to carry bikes on your 2011 Jeep Wrangler is to use a trailer hitch and a bike rack that will extend out far enough to clear the spare tire. If your Jeep does not already have a hitch I recommend etrailer hitch # e98856 because with it the receiver sticks out further than other hitches making it more likely for bike racks to clear the spare tire. Once the hitch...
view full answer... - Is The Curt 4-Way Wiring Harness Compatible With a 2021 Jeep Wrangler Unlimited 4xe? Yes, the Curt T-Connector Vehicle Wiring Harness # C56407 will work on your 2021 Jeep Wrangler Unlimited Sahara 4XE. If you are needing a receiver I recommend the etrailer Trailer Hitch Receiver # e98856. This receiver is longer than other receivers allowing for better clearance around the spare tire for hitch mounted accessories. It will also make connecting to a trailer easier as the ball connection will be further from your Jeep.
view full answer... - Could RockyMounts BackStage 2 Bike Rack Clear Rear Spare of 2017 Jeep WranglerTo determine if the RockyMounts BackStage 2 part # RKY10002 that you referenced would clear the rear spare of your 2017 Jeep Wrangler you'd need to take one measurement. You'd need to measure from the center of the hitch pin hole out to the furthest point out on the rear spare. If that dimension is less than 9-1/2 inches this rack would fit and work great. If you don't have the clearance for the rack we do offer a hitch that would provide you with the additional clearance needed with the...
view full answer... - Will The Malone Hanger Spare Tire Bike Rack Fit My 2021 Jeep Wrangler Unlimited?This all comes down to how wide your spare tire is. If your spare tire width on your 2021 Jeep Wrangler Unlimited is between 8 and 10-1/2 inches then you will be able to use the Malone Spare Tire Bike Carrier # MPG2147. Another option you have is getting this hitch receiver # e98856 which is SUPER simple to install. You can then use the Swagman Trailhead 3 # S63365 but you may need to get a hitch extender # C45791. This will cut your hitches capacity in half but since the Trailhead is only...
view full answer... - Selecting A Low Sitting Receiver For A 2010 Jeep Wrangler Rear HitchI pulled from the warehouse three hitches that will fit your 2010 Jeep Wrangler. The center of hitch pin hole to the highest mounting bolt hole for each is below. Of these three, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR measures 5" providing you the lowest hitch position. The etrailer Trailer Hitch Receiver # e98856 and Curt Trailer Hitch Receiver # C13392 each measure 4" from the center of the hitch pin hole to the highest mounting bolt hole.
view full answer...
- Can the T-One Wiring Harness Be Used With the Hopkins Tail Light Wiring On a 2017 Jeep WranglerYes, you can use both the T-One Vehicle Wiring Harness part # 118416 and the Hopkins Custom Tail Light Wiring Kit part # HM56200 together on a 2017 Jeep Wrangler. The harnesses will simply plug into one another between the tail light and factory wiring harness. The only issue that has occurred in the past with this type of setup is reinstalling the tail lights because the connectors take up space but the good news is that there is a good amount of space behind the tail lights on a Jeep...
view full answer... - Will Hopkins Plug-In Trailer Wiring Harness Fit a 2019 Jeep WranglerThe Hopkins Plug-In Simple Vehicle Wiring Harness # HM42635 that you referenced is a fit for 2007 - 2014 Jeep Wranglers so for your 2019 Wrangler you will want the Tekonsha T-One # 118786 instead. Hopkins currently doesn't have a wiring option for you (as of May 2019) and we have found the Tekonsha wiring to be the most reliable on the market. The T-One has the same type of plug-in connectors as the Hopkins that you referenced but it also has a hot lead that you route up to your battery...
view full answer... - Hitch Receiver and Wiring Harness for a 2019 Jeep WranglerYes, I can confirm the etrailer Trailer Hitch Receiver item # e98856 and the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118786 both fit your 2019 Jeep Wrangler. I have attached installation videos for both so you can follow along with the installation process. To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and...
view full answer... - Recommended Trailer Hitch and Bike Rack for 2020 Jeep WranglerStarting with the hitch for your 2020 Jeep Wrangler, I highly recommend the etrailer Class III # e98856 because it features a longer receiver tube to help with spare tire clearance on the Jeep and features a unique matte black finish that I think pairs really nicely with this vehicle. The hitch itself features a 350 pound tongue weight capacity, more than enough for a loaded bike rack, and a 3,500 pound towing weight limit if you ever decide to pull a trailer in the future. I have attached...
view full answer...
- Recommended Hitch for 2021 Jeep Wrangler Unlimited SportFor your 2021 Jeep Wrangler Unlimited Sport I recommend the # e98856 etrailer Trailer Hitch Receiver. This hitch is a custom fit for your Wrangler and has a maximum gross trailer weight of 3,500 lbs and tongue weight of 350 lbs. The rugged, matte black finish adds durability and gives the hitch a carbide-like appearance which helps hide any scuffs or dings. It also has the longer 9" receiver tube to help clear the spare tire with any accessories. If you plan on doing some towing, I recommend...
view full answer... - Trailer Hitch and 4-Way Wiring Harness For a 2023 Jeep WranglerWe do have both the trailer hitch and 4-way wiring harness you are needing for your 2023 Jeep Wrangler. Trailer Hitch - etrailer Trailer Hitch Receiver # e98856 This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also has a nice matte black finish and the receiver tube sticks out further to allow you to use...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Michael B
Video by:
Thomas T
Video by:
Samuel H
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Bradley B
Updated by:
Wilson B
Updated by:
Carrie F
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/3/2022
I researched and found that there is install note that needs to be added to the manual. Some models may have existing bolts attaching a plate with weldnuts on it. The hitch will need to be slid inbetween the bracket and the mounting tube witht he factory hardware reinstalled, securing the hitch.