bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 75902
In Stock
$156.43
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75902 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (957)
  • Q & A (0)
  • Photos
  • Used (1)

Draw-Tite Trailer Hitch - 75902

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 350 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75902 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

HH87663 Hidden Hitch Class 3 Trailer Hitch Receiver

Replaces 75892 and 75606

Installation Details 75902 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75902

Average Customer Rating:  4.9 out of 5 stars   (957 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2017 Nissan Rogue

Pros:
- Seems solid
- As designed,
simple to install (but see below)
Cons:
-Package arrived severely damaged - hitch was very poorly packed (not the fault of UPS). This resulted in chipped paint on the product.
- One side of the hitch was slightly bent, making it very difficult to line up with the frame nuts. Installation should have been simple - this made it quite difficult. I eventually got it it done, but I had to take the tire off to get enough access to force the hitch into alignment.

E W.

8/7/2024

One year on, no complaints. It does partially block the motion-activated lift gate: the feature will work, but you have to more precise. I find its worth it to have a trailer hitch.



by:

Easy install fast shipping awesome company to deal with.



by:
2014 Nissan Rogue

I ordered this hitch for my 2014 Nissan Rogue, and was pleased with the instructions and the workmanship. Nothing looked flimsy or insufficient for the loads I would put on it.

Assembly was not straightforward, but I didn't have to drill anything. I only had t remove a metal cowling from near the end to cut it out for clearance. The video really helped a lot.

I'd really recommend having a jack to allow the hitch to be inserted. Due to the space, it was necessary to push up one end, swing over so the other end would get into place. Not a hard puzzle, but tough without a good jack that can hold the weight while moving it around.

I needed the hitch to add a bike rack, and haven't had any complaints or noticed any problems after a year.

TL;DR: Very satisfied, the online videos helped a lot



by:

Instructions were sufficient. My 12 year old did much of the installation, despite child labor laws. :)

I haven't actually USED the hitch yet, so I can't testify to its strength, but install was easy.

Joseph W.

12/22/2017

used once in the past year on a ski trip. worked great. strong and well made.



by:
2016 Nissan Rogue

Easy to install on my 2016 Nissan Rogue. Works perfectly to pull my boat.



by:
2016 Nissan Rogue

I purchased this hitch specifically to support a 4-bicycle rack by Yakima. It served that purpose well, with a 350# tongue limit which is far below what we operate. This is a very beefy hitch. Pep-Boys installed it with no issues on our 2016 Nissan Rogue.

In the photo you can see the early signs of rust after about a year in Southwest PA and that's only after serving six months of the past year. I expect to deal with this using some Krylon rust-inhibiting paint. That is kind of a disappointment and I would have expected a thicker powder coat.

I will say that if I could make one change it is for there to be one more hole to key the rack in a bit closer to the body.



by:
2016 Nissan Rogue

I was looking for a hitch on my new Rogue for a bike rack requiring a 2 inch receiver. I have been impressed with every aspect of this product. The site was excellent and easy to understand. The instruction video was informative and easy to understand. The hitch was delivered on time. The free shipping was a great bonus. I had no problems with the installation. I had a little trouble removing the factory bracket on the right side. The bolts were very tight. You just need the proper tools. I was even able to get the appearance plastic to fit on the left side with a little trial and error. The right side fit with no modifications. The hitch works great and looks great.



by:
2016 Nissan Rogue

Very pleased with this hitch- delivered very quickly, and even though part of the hitch was sticking out of the box it was in perfect condition.

I watched the instructional video a few times, which was very helpful, and the whole install was about 40 minutes. About 25 minutes of this was spent getting the Phillips screws out from the plastic trim (the nut above is not accessible and spins, so you may need to pull down on the trim as you unscrew for it to come out ), and then the bolts for the tow hook out as they were seemingly screwed in and welded by demons into my car.

Installing the hitch was a breeze, and was easier than I anticipated! This is coming from someone who is not very handy at these sorts of things .

Would highly recommend this for the Nissan Rogue. Plan on using this for my hitch-mount bike rack, as well as towing a small utility trailer.

Attached are a few shots- before and after the install.



by:
Nissan Rogue

I needed a rack to hold two totally different types of bikes. The Swagman XTC-2 platform bike rack is perfect! Since one bike is a Randy Ross 3G stepper bike and doesn't have a crossbar, I needed a rack that would carry both styles, this rack does that. Using the etrailer questions page, I was able to determine the dimensions and clearances of the bike rack to make certain is was correct for my bikes. I also used the different videos to also help pick the correct tow hitch for my Nisson Rogue. I placed the order, had an immediate confirmation and the rack was shipped the next day. It arrived as scheduled in perfect shape. The directions are a little vague and do not match the hardware, but it is not an issue. This is very simple to assemble. I like the fact that the weight of the bikes is supported in the hoops, then the clamps secure the frames, a very secure system. The hoop locations are adjustable, it took me a couple of tries to find the ideal configuration for holding our bikes. Also, the rack can be folded down (with the bikes removed) to allow the rear door to opened without removing the rack from the car. Etrailer is great to deal with and I got a great price with free shipping. I have to stress that the installation videos make the installation easy and were 100 percent correct. They addressed every question I had about how to install the tow hitch. It was actual a two person job. The reviews and videos of the racks in actual use was a big help to me, in picking the tow hitch and rack combo. I would highly recommend etrailer.com



by:
2014 Nissan Rogue

The Draw-Tite Max Frame Hitch Receiver 75902 fits a 2014 Nissan Rouge with room to receive our Yakima Swing Daddy bike rack system with room to spare between the bumper and the bike rack.

Initially, we had a local parts supplier fit the vehicle with a Curt brand hitch. Unfortunately, it did not extend out far enough to receive the Yakima system. We were left without any alternative hitch solutions other than a hitch extender which would be nothing but a headache.

Thankfully, I found etrailer.com and I got all the necessary info to make the right choice. Thanks to customer service info, it was a go.



by:
2011 Nissan Rogue

Timely shipping by Etrailer and wonderful customer service. I emailed a question and got a stellar answer next day by a rep. The hitch itself is high quality and very sturdy. Installation itself was a breeze thanks to the video on etrailer.com and included instructions. Video may need to be updated though as the design of the hitch had a minor change relating to the passenger side number of bolts (was 3 and dropped to just 2). The hardest part of the install was cleaning out the weld nuts on the frame of my 2011 Nissan Rogue. I ultimately had to borrow a toolkit from the local autopart store for cleaning out the threads (almost like a tap but called a rethreader or thread chaser set). After MANY cleanings manually over an hour with a brush acquired here at etrailer.com I made absolutely little headway in threading my bolts, but using the thread chaser I was done in 5 minutes. Thank you etrailer for the wonderful price and customer service!



by:
2013 Nissan Rogue

Got everything I ordered in the box sooner than I expected. It took me about 15 - 20 minutes to put the hitch on using a floor jack. Make sure you put the drivers side up first it goes much quicker and easier that way. The wiring harness worked beautifully. I put the wire to the battery through a rubber grommet just to the front of the spare tire compartment. Using a piece of electric fence wire, about 3 feet long, taped to the end I was able to fish it over top the gas tank and follow the fuel lines all the way to the engine compartment. Keeping it under all the protective shields. All in all it took a little bit of work to do this way but well worth the extra effort because it is completely hidden and protected. Took 3 - 4 hours to do the wiring. All in all one afternoon in the shop the job was done. Haven't pulled a trailer yet but don't expect any problems with it when we take a small U-Haul to Texas next month.



by:
2016 Nissan Rogue

I installed the hitch myself. Took me a little longer than it should have but I was able to do everything myself. Brought the laptop out to garage and watched the how to video and went step by step. I backed the truck up on ramps in the driveway to fit under the truck with ease. I initially used two jack stands to prop up the hitch while attaching. I found that using one jack stand only in the center was best. Having multiple extension sizes for ratchet is beneficial as well. Be sure to have metric size available. I used a razor blade to cut the plastic to fit right. Be sure to attach the plastic pieces the correct way when reassembling or the pins don't hold well. :) it seems to sit low so I may reverse the ball so it sits up higher. Wonder if most have to on the rogue? I may pay someone to install the wiring because that looks a little more difficult than the hitch itself.



by:
2015 Nissan Rogue

I DID not install it myself, I took it to a trusted auto shop and they said it was the best custom hitch receiver they had seen.
They had it installed in less than a 1/2 hour!

Highly recommend this product!

Jonathan M.

7/6/2015

What year is your nissan Rogue?



by:

Another happy customer, the instructors were accurate and the hitch was installed as expected. The online videos and the other posted reviews were very helpful. After removing the pictured bracket the hitch bolted straight on. The only recommendation was that hitch arrived with the ends of it breaking through the wall of the shipping box and one end had paint chipped off, my recommendation was to improve the shipping packaging for such a quality product.



by:
2016 Nissan Rogue

Ordered this hitch for my Nissan Rogue. The delivery was prompt and arrived a day or so before I expected. Removed hitch and had a small fit when I could not find the hardware. Then decided to check in hosel where the bike rack inserts and bam there it was. Had to use some long pliers to get it but was successful.

Hitch was in excellent condition. Installed by myself and it was harder than expected from the perspective of how I had to do it. Being under the car laying down made it challenging to get some of the bolts loosened and hold the hitch up so I could install first couple of bolts.

One issue to look out for... when removing plastic vanity covers off both sides, the Philips head screws unscrew to a certain distance then you have to pull out. Its part threaded and part push pin. Wasted considerable time until I just yanked the cover in frustration.

Final install was completed, looks great. Feels sturdy and secure. Very pleased with the equipment. Will be testing it out asap....



by:
2013 Nissan Rogue

Excellent product! Pain in the butt to install due to dirt and rust in the mounting holes. I used plenty of WD-40 and patience. Took a couple of hours due to patience but once it was on, it was on!

This is 3rd or 4th purchase from etrailer.com and they ship quickly. I have used their customer service in the past with no issues.

See pic of hitch on my 2013 Nissan Rogue.



by:
2014 Nissan Rogue

I purchased the Drawtite Hitch Receiver for my 2014 Nissan Rouge SV. Overall I think this was the perfect DIY project with minimal tools and a little effort. The only challenges I faced was that two of the hitch bolt holes did not line up with the pre-drilled frame holes by about a half an inch. One of the hitch mounting brackets was welded inwards on the cross bar by about a half an inch. I called the customer hotline and was told this is a common problem, apply body weight to bend the mounting bracket outwards a little more. I will tell you now I'm pretty big and that is impossible. I used a heavy mallet and bent it out with ease until it lined up perfectly with the frame. I also stripped the first three threads on one of the bolts however I have a tap and die kit and that was corrected. This is the only reason I did not give an excellent rating as the mounting bracket was off measurement by a half an inch. My advice is to make sure all holes line up with the frame perfectly before your install and do not force bolts to turn they all should turn freely with ease. If it lined up properly the first time then yes, this is a 30minute install.



by:
2012 Nissan Rogue

Excellent communication through the order and shipping process. Order was placed on Monday 28th and it shipped the same day. It arrived on Thursday the same week at Niagara Falls NY. Instructions were pretty straight forward. I installed it myself and the only issue I had was cleaning out the rust in the frame weld nuts. Followed the etrailer video on cleaning out the rust but after 6 years on the road through Canadian winters there was a lot of rust. Couldn't find a right size tap to clean the nuts so I did the next best thing. I used a Dremel cutting disc to cut out 4 lines of threads at 12, 3, 6 & 9 o'clock positions. Used the old bolts that secured the factory installed towing eye. Screwed and unscrewed the bolt on the 3 driver side weld nuts using a pneumatic ratchet. This took the longest time. Once these were clear install was a breeze. Suggest anyone doing a self install perform the above prep work while the product ships. Once ready install takes less than 15mins.



by:
2015 Nissan Rogue Select

A great experience ordering from etrailer. I paid $xx.xx dollars extra to get it on time for a camping trip. Packaging was strong, no damage, and there was the shining new item. It takes 20 minutes to install this product. Then I attached a 4 bike trailer and took a weekend trip. It was a 2 hours drive mostly in highway each way and we were able to enjoy our bikes. The product is strong. Also, seeing order details and great tracking information was great. I recommend the product and etrailer.



by:
2014 Nissan Rogue

Item was installed onto a 2014 Nissan Rogue S. This will be used for some light hauling in the next few weeks for some moving, and in the future for a recreational vehicle trailer.

Very clean finish on the item and it appears to have a very solid construction. My car will probably give out before this does as this is rated way beyond the actual towing capacity of the car.

Loving the video walk-throughs provided on the web site, as you can foresee MOST potential obstacles before you get elbows deep into the installation.

I would love to give this a perfect score, but it seems that eventually, the tooling or assembly jig for items like this are slightly off spec. In my case the mounting holes were slightly askew. No matter which side you bolted into place first, the holes were about a 1/4 inch off on at least one of the holes. Just enough to prevent the bolts from inserting with out the use of some form of alignment tool, to pull things into place. It did make the install a little challenging and quite a workout.

Other than that, the install went as expected. A good linoleum knife does wonders when it comes to trimming out the drivers side under-side covers for re-install.

All in all a very good experience.



by:
2015 Nissan Rogue

While on the market for a trailer hitch for my 2012 rogue I ran into this one online. Read great reviews so I purchased it. Upon arrival of was very evident how sturdy it was, all the hardware was included as well. Bought this along with the wiring and took me 15 min yo install the hitch, about 4 hours to install the wiring, taking my time to clean and disassemble all the panels to route the power wire from the battery through the inside and out the grommet. Definitely recommend it as everything g was well explained and delivered as promised.



by:
2017 Nissan Rogue

Ok...first let me say that "etrailer" is what premium service is all about! Super fast shipping....wow! They shipped my hitch within a couple hours of the online purchase and it was free! The items arrived supremely packed with all hardware. Tracking was available the entire time.

I ordered the Draw-tite Max class 3 hitch specifically designed for my wife's 2017 Nissan Rogue AWD, although we are just hauling bikes, I thought it well worth the few dollars more. Hitch was superbly designed and craftsmanship exceeded my expectations. Really well built, strong, not scrimping on materials here!

I installed it myself in about an hour. I used a couple jackstands to hold unit up since I was by myself. I did not lift the SUV as clearance was fine to work underneath. The installation video was of great importance, to be able to see a step by step install made for an excellent install.

I cannot reiterate enough how professional and detailed "etrailer" has been. Mr. George followed up via email a couple of times for no reason other than to see if I was happy with my purchase and how everything was. Now that's the way all .com businesses should be!

Thank you to all at "etrailer" if you are looking for anything that has to do with sports, RV accessories, carrying or pulling anything on a vehicle....this is the place, trust me they are number one in my book.

So who am I just a regular guy who was very impressed with this purchase!



by:
2015 Nissan Rogue

Very impressed with the fast shipping. The box did come damaged and the hitch had some deep scratches. Not a big enough deal to hassle with and it doesn't effect the quality of the product. I've installed these before so I knew how easy it would be to install. I did watch the "How To" video to get familiar with the vehicle. Very helpful. I even had my 9 year old help me. Picture attached. Looks great. Overall, very satisfied with the hitch and with eTrailer. Thank Guys!



by:

I bought the 2" hitch and a bike rack. Both arrived in less than a week in great condition. My installation on both was finished within one hour. Installation was as easy as it gets. I used a floor jack to support the hitch while locating bolts. Great products and simple installation. I would recommend etrailer.com to anyone. You need 18 & 19mm sockets with an extention to install bolts.


25
963
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Hitch Recommendation for a Nissan Rogue Carrying a Kuat Sherpa Bike Rack
    You are correct in your assumption about the Draw Tite Hitch part # 75902 being about 6 inches from its hitch pin hole to the furthest point out on the bumper, the other Draw Tite hitch part # 75606 that you referenced would be a better option for you since that dimension with this hitch is 4-1/2 inches. When folded up the Kuat Sherpa # SH12G will have 7-3/4 inches from the center of the hitch pin hole to the nearest portion of the rack, which would be the wheel cradles. The # 75902 should...
    view full answer...
  • etrailer Trailer Hitch Receiver # e98846 Driver's Side Mounting Bracket Clearance of Exhaust Hanger
    The etrailer Trailer Hitch Receiver # e98846 will have a larger notch for the exhaust hanger on your 2011 Nissan Rogue that is coming into contact on your Draw-Tite Hitch # 75902. I felt that the best way to show you is with a picture that I have included of the etrailer hitch installed on the Nissan Rogue. You can see where the bolt hole is in relationship to the notch in the receiver for the exhaust mount. This will help you to see if the exhaust hanger on your Rogue will interfere...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Trailer Hitch for a 2015 Nissan Rogue
    I recommend the Draw-Tite Class III trailer hitch # 75902 for your 2015 Nissan Rogue. It's a bolt-on installation and no welding is required. Also, you won't need to cut or trim anything. You may need to remove the appearance panels for installation. If you are having the hitch installed by a local shop, ensure they give you the appearance panels to keep because you will need to re-attach once you turn in the vehicle when lease is complete. The hitch # 74902 has a 3,500 pound maximum gross...
    view full answer...
  • Class III Trailer Hitch Fit for 2021 Nissan Rogue
    The Draw-Tite # 75902 fits 2008-2020 Rogue models, and although it isn't a fit for your 2021 model, we do have a hitch fit available for the 2021. I'd recommend the Curt Class III, part # C24HR. If you'll be using the hitch for towing, you'll also need a trailer wiring harness, part # TK76FR, a ball mount like # 2753 and # 19260 for a 1-7/8 or # 63845 for a 2 inch hitch ball.
    view full answer...
  • How to Find Out the Cost of Installing a Trailer Hitch
    A professional could install trailer hitch # 75902 for your 2013 Nissan Rogue in about an hour or so. You would have to check local shops in your area to determine what rate they charge per hour. You can even print out the instructions which I have linked for you and take it to shops to see what they would charge you.
    view full answer...
  • Trailer Hitch and Vehicle Weight Capacity Difference Explained
    A trailer hitch and the vehicle it is installed on can have different towing capacities. Draw Tite designed and tested the part # 75902 that you referenced and found that it had a capacity of 3,500 lbs total trailer weight and 350 lbs tongue weight. That is just for the hitch by itself. Now Nissan came up with their own towing capacity for the 2015 Nissan Rogue that happens to be lower than the hitch. When determining the overall towing capacity of a setup the lowest rated component is...
    view full answer...
  • Comparing the Curt C13204, etrailer E98846, and Draw-Tite 75902 Hitch for a 2019 Nissan Rogue
    The etrailer.com Trailer Hitch Receiver part # E98846 is made by Curt right here in the USA. The only difference between this and the Curt Trailer Hitch Receiver part # C13204 is that the Curt hitch has a glossy powered coated finish whereas the etrailer.com Hitch has more of a matte powered coated finish which we find does not draw as much attention to it. I have attached a photo comparison of these two finishes for you. When comparing the etrailer.com and Curt hitches to the Draw-Tite...
    view full answer...
    Image 1 for
  • Troubleshooting Bolts Not Fitting When Installing Draw-Tite Trailer Hitch on a 2008 Nissan Rogue
    If you are having trouble getting the hardware to install for your Draw-Tite trailer hitch then what you need to do is soak the bolt holes with WD40, wait for a few minutes to let it set in, and then use a wire brush like part # 814113 to clean out any dirt or debris. This isn't very uncommon especially on vehicles that are a little older. Another thing to check is to make sure that you have the correct trailer hitch for your vehicle. If you are trying to install a hitch on the 2008 Nissan...
    view full answer...
  • Replacement Hardware for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75902
    You can actually order all of the replacement hardware for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 with part # RHK on our site. This includes the (5) M12 x 1.25 x 35mm CL8.8 hex bolts as well as the (5) 1/2" conical washers. Once on the product page select "Draw-Tite" from the "Manufacturer" drop down list and then enter "75902" in the "Hitch Item Number". We will then send you all of the hardware that you need for the installation. The installation instructions have been...
    view full answer...
  • Recommendations For Trailer Hitch And Wiring For 2017 Nissan Rogue
    If you have the 2017 Nissan Rogue the trailer hitch I recommend is the Draw-Tite # 75902. This is a Class lll hitch and it has a 2-inch receiver opening. This is a custom fit hitch and requires no drilling for installation. If you have the Rogue Sport, we do not have a hitch available for that model. If you need a trailer connector I recommend the T-One Wiring Harness # 118480. Just plug this harness in to the connection points behind the driver and passenger side in the trunk area...
    view full answer...
  • What Size Socket is Needed to Install Draw Tite Trailer Hitch on 2015 Nissan Rogue
    According to the linked directions you will need 18mm and 19mm sockets to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 on your 2015 Nissan Rogue. The 18mm socket is what is needed to remove the bolts that are securing the factory tow hook while the 19mm socket is what is used to tighten down the hardware for the hitch.
    view full answer...
  • Trailer Hitch Fit for 2017 Nissan Rogue for Using Hitch Bike Rack
    The best hitch option for your 2017 Nissan Rogue for use with a hitch bike rack is the 2-inch Class III hitch # 75902 from Draw-Tite. This hitch bolts on to the Rogue using included hardware; no drilling is required. An install video showing a 2016 model year is linked for you to illustrate the entire process. Once this hitch is installed on your Rogue you can use a compatible 2-inch Class III hitch bike carrier. You will want to select a rack that offers at least 6-inches of clearance...
    view full answer...
  • How Does The Draw-Tite Hitch 75902 Install On the 2020 Nissan Rogue
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75902 attaches to the Nissan Rogue's frame after removing the factory tow hook and appearance panels if you have them. It is a pretty straight forward install, raise the hitch into position just loosely install the provided hardware through the elongated hole into hitch and through the frame. Then the hardware will need to be torqued down according to the installation instructions. I have attached a snip from the installation instructions...
    view full answer...
    Image 1 for Image 2 for
  • Does Draw Tite Hitch # 75902 Come with Install Bolts
    Look in the tubes of the hitch. Down the side opening and the hitch opening. A lot of times the hardware is stuffed down in there and sometimes it's hard to see. You should have gotten 5 bolts though and if they are not there customer service will get them out to you. The bolt size is M12 x 1.25 x 35mm CL8.8.
    view full answer...
  • Is Loc Tite Required When Installing Draw Tite Hitch on 2013 Nissan Rogue
    When the install hardware of the Draw Tite hitch part # 75902 is installed and torqued to spec you wouldn't necessarily need to use Loc Tite 242 # LT37418, but it wouldn't hurt anything so if it give you some peace of mind then go for it. If the hardware has already been torqued though you shouldn't remove it and reinstall it as the hardware is considered one-time-use since the bolts stretch when torqued. Removing the hardware would require you to replace all of it.
    view full answer...
  • Trailer Hitch, Wiring and Ball Mount Recommendation for 2011 Nissan Rogue
    For towing a trailer with your 2011 Nissan Rogue you'll want a hitch, wiring and a ball mount and you'll be set. The Draw Tite hitch part # 75902 is a confirmed it and would work great. It has a 2 inch opening which is the strongest size available for your vehicle plus it is most concealed aside from the hitch opening. For trailer wiring you'd then want the Hopkins kit part # HM11143645 which is a confirmed fit too. Since you wanted to do some towing you might be interested in etrailer...
    view full answer...
  • Does the Rear Panel of a 2015 Nissan Rogue Have to Get Removed to Install Draw Tite Hitch 75902
    Draw-Tite recommends the removal of the lower panel you referenced when installing the part # 75902, but if you found a way to trim the panel and have it reinstalled that is fine as well. We can't officially recommend that since it's not what Draw Tite recommends. I attached an install video for you to check out as well.
    view full answer...
  • Trike Rack and Hitch Recommendation for a 2015 Nissan Rogue C
    We have the Hollywood Racks Trike Carrier part # HR1000Z-R-TRKADP that is designed to carry trikes like your Desoto Classic trike. I looked up pictures of your trike and it would work well with this rack. If you need a hitch for your 2015 Nissan Rogue the Draw Tite part # 75902 would be a great option confirmed as a fit.
    view full answer...
  • Why Do Hitches for 2014 Nissan Rogue have Higher Capacities than the Vehicle
    Trailer hitch manufacturers will rate the capacity of the hitches they make and those capacities will be for just the hitch. The Draw Tite # 75902 is a confirmed fit for your 2014 Nissan Rogue and would have more capacity that you would need. Basically when determining the overall capacity of a towing setup you have to go with the lowest rated component in the setup as the overall capacity. In your case it would be the vehicle at 1,000 lbs. If you wanted to do some towing you might be...
    view full answer...
  • Fit and Compatibility of Draw-Tite Class III Trailer Hitch on a 2008 Nissan Rogue
    The Draw-Tite Class III Trailer Hitch # 75902 is a fit for all models except the Krom Edition of the 2008 Nissan Rogue. Some other things you will need to tow a trailer will be wiring harness # 118480, a ball mount, and ball. I recommend the # 989900 kit, this will include a 2 common ball mounts, pin and clip, and 2 common sized balls. The size ball you will need is dependent on the coupler size and height of the trailer. I have linked a Help Article on how to determine what suits your...
    view full answer...
  • Recommended Trailer Hitch and Two Bike Rack for 2009 Nissan Rogue
    I'd recommend the Draw-Tite Class III hitch, part # 75606. The hitch uses the more popular 2 inch receiver opening, so you'll have a better selection of bike racks and other hitch mounted accessories to choose from. I've linked to an install video. The number of bike racks compatible with your Rogue are too numerous to mention, but if you click the link, you can see a listing of the top 20 most popular bike racks with Rogue owners. What in my opinion are you two best choices follow. ...
    view full answer...
  • Problems with Holes Not Lining Up on Draw-Tite Trailer Hitch # 75902 for 2015 Nissan Rogue
    Sometimes during shipping the hitch will get bounced around a bit which could cause it to be off just a hair. Our installers run into this from time to time and as long as there are no stress marks or paint chipping, there is an easy fix. The Draw-Tite Trailer Hitch, # 75902, for your 2015 Nissan Rogue should measure 44 inches from outside edge to outside edge. If the mounting wings are bent in too far, place one of the mounting wings under a sturdy table and pull up. This should fix the...
    view full answer...
  • Will the Kuat Transfer Bike Rack Fit a 2017 Honda CR-V or 2017 Nissan Rogue
    The Kuat Transfer bike rack # KU24FR will fit in Class II, 2 inch trailer hitch receivers. If the 2017 Honda CR-V has a factory trailer hitch it would be a Class I but there are aftermarket Class II and III trailer hitches available for it such as # 76128 which is a popular option for the 2017 CR-V. I am not sure what, if any, factory hitch is available for the 2017 Nissan Rogue but there are aftermarket Class II and III hitches available for it as well such as # 75902. The Kuat Transfer...
    view full answer...
  • Will the Draw-Tite # 75902 or T-One Wiring # 118480 Affect the Lift-Gate Feature on a 2018 Rogue
    The receiver of the Draw-Tite Max-Frame Trailer Hitch Receiver # 75902, or any trailer hitch for that matter, will allow you to still activate the lift-gate feature on your 2018 Nissan Rogue. Instead of waving your foot under the bumper you will simply need to kick to the left or right of the receiver (as if kicking a football) to activate the lift-gate. The Tekonsha T-One # 118480 wiring kit will not affect the lift-gate at all. For a complete towing setup, if that's what you plan on...
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Hitch?


Used Items Available
Used Picture for Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

$155.95
Add to Cart
Secure Checkout

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video by:
Dustin K
Employee Alan C
Video by:
Alan C
Employee Thomas T
Video by:
Thomas T
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Jacob H
Test Fit:
Jacob H
Employee Ryan G
Test Fit:
Ryan G
Employee Bradley B
Test Fit:
Bradley B
Employee Laura H
Written by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.