See what our Experts say about this CURT Trailer Hitch

• Recommended Trailer Hitch For A 2004 Ford F-150
  Hi Frederico, To replace the factory hitch on your 2004 Ford F-150 I recommend the etrailer Trailer Hitch Receiver # e58KR. This Class III hitch comes with 6,000lb GTW / 600lb TW capacity and can be used with a weight distribution hitch to haul even more weight. You'll want to check the capacities of your F-150 just to confirm it's capable of handling the weight and go with whichever rating is lower. The matte black finish will help hide and scratches or blemishes that you'd typically...
  view full answer...
• Torque Spec for Curt Hitch # C13352
  Hey Randy, I checked and the 210 ft lbs of torque is correct for the install of the Curt hitch part # C13352 that you have. I know that's A LOT of torque so you might have to borrow a longer torque wrench from a car parts store if you don't have one.
  view full answer...
• Trailer Hitch Receiver for The 2004 Ford F-150 STX With The New Body Styling
  Yes, the Curt Trailer Hitch Receiver # C13352 will fit your 2004 Ford F-150 STX as is confirmed to work on all models that have the new body that did not include the factory hitch. This hitch will require drilling new holes into your frame on your f-150. I recommend the Curt Trailer Hitch Receiver # C14357 as it will not require drilling or welding on your f-150. It will instead utilize the factory holes that are already in your frame to mount the hitch. This is also a Class IV hitch...
  view full answer...
• Does Curt Trailer Hitch Receiver 13352 fit 2005 Ford F-150 XL With Long Bed
  Yes it does! I can confirm the Curt Trailer Hitch Receiver # C13352 will fit your 2005 Ford F-150 XL with a long bed, V6 engine and manual transmission. The only thing it would not fit is if you already had the factory trailer hitch on your F-150. I have added a link to a video install for you to check out as well of the Curt Trailer Hitch # C13352 on a 2005 Ford F-150.
  view full answer...
  
• Trailer Hitch Fit for 2005 Ford F-150 STX/XLT with Factory Vibration Dampener
  We can offer you several options in a 2-inch Class III hitch that will fit your 2005 Ford F-150 STX/XLT that has the factory vibration dampener. Curt offers hitches # C13352 which costs less but requires some drilling, and # 13357 which costs a bit more but does not require drilling for installation. Both are confirmed fits for your truck and both work with the factory dampener. I do suggest the no-drill option # 13357. The written instructions and a helpful article are linked to assist...
  view full answer...
• Trailer Hitch for a 2005 Ford F-150 that Looks Like a 2006 Ford F-150
  Are you talking about the saddle bracket that goes across the back of the vehicle on the 2006 or are you talking about the vibration dampers on the 2005? I suppose it is possible that your truck could have components on it for a 2006 if it was built late in the 2005 cycle. But it does not seem likely they would use a whole different frame. What I have done is linked instructions for a 2005 hitch, # C13352, and a video, as well as instructions and a video for a 2006 hitch, # 75506, along...
  view full answer...
• How To Tell if 2005 Ford F-150 Has Vibration Dampers for Curt Trailer Hitch
  The Curt Trailer Hitch Receiver part # C13352 which is a fit for a 2005 Ford F-150 works on models both with or without dampers. That said, you could always just look under the truck to see if you have them or not, you can find some photos online if you don't know what they look like. Please note, the trailer hitch does not fit models with a factory hitch as it's tied into the bumper.
  view full answer...
• Which Hitch Will Fit a 2005 Ford F-150 With the Flare Sides and Short Bed
  I can confirm that the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13352 will fit on your 2005 Ford F-150 with the short bed and Flare-sides. I've added a photo that we have on the product page of this hitch installed on the same truck for you to check out. If you also need a wiring harness for this truck, I recommend using the Hopkins Plug-N-Tow # 40185, which will plug into the US Car Connector port under the vehicle on the driver's side and allow you to have a 4 way...
  view full answer...
  
• Will Curt Trailer Hitch C13352 Fit a 2005 Ford F-150 with Vibration Dampener
  The Curt trailer hitch # C13352 will fit all models of the 2005 Ford F-150 with or without the vibration dampener. I have included a link to the installation instructions for you to view. If you plan on doing some towing, I recommend the etrailer ball mount kit, # EBMK4, which comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a carrying bag. For trailer wiring use # 18252 if the truck does not have a factory tow package. Use # 40185 if you need to replace a...
  view full answer...
• Recommended Cost Effective Trailer Hitch for a 2005 Ford F-150
  The trailer hitch I recommend for a 2005 Ford F-150 is the Curt Trailer Hitch Receiver part # C13352 which requires drilling or part # 13357 which does not require drilling. These are the two most cost effective options we have for you. They are designed specifically for a 2005 Ford F-150. Unfortunately, there would be absolutely no way to use a trailer hitch for another truck such as the etrailer Trailer Hitch Receiver part # e98852 because trailer hitches are designed for exact vehicle...
  view full answer...
• Will the Curt Hitch C13352 for a 2004 Ford F-150 Fit With Hitch Ball In Bumper
  The Curt Trailer Hitch Receiver part # C13352 is a fit for a 2004 Ford F-150 but only models without the factory frame mounted trailer hitch. The towable bumper will not be an issue and you can keep your ball installed as well.
  view full answer...
• Availability of Trailer Hitch for 2005 Ford F-150 XLT
  A level trailer tows much better so I understand your interest in a hitch that will allow your trailer to remain level when it is hitched to your truck. For your 2005 Ford F-150 we do offer hitch receivers that will provide a hitch tube that sits below your bumper. These hitches mount to the truck's frame and the receiver tubes will sit below your bumper. There is no bumper-mounted hitch for your truck. Since your truck does not have a factory hitch you can use either round-tube Curt Class...
  view full answer...
• Could the Curt Hitch part # C13352 Tow a Camper that Weighs 6500 lbs
  If you use a weight distribution system yes the Curt Hitch part # C13352 would work for you since it has a 10k capacity with a WD system and only 6k without. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well. Typically tongue...
  view full answer...
• Using Receiver Hitch Designed for Another Vehicle on a 2005 Ford F150
  Because the vast majority of the receiver hitches we offer are custom designed and vehicle-specific, the Curt Class V receiver hitch that you referenced, part # C15409, is not compatible with your 2005 Ford F-150. We offer several different hitches that would be compatible with a 2005 F150, the model with the greatest towing capacity (6000 lbs) is the Curt Class III receiver, part # C13352. Among the other towing accessories you might need, we offer a ball mount part # 2753, 1-7/8 inch...
  view full answer...
• Will the Curt Class III Trailer Hitch # C13352 Fit on a 2004 Ford F-150 Style Side New Body Style
  Yes, my technical contact at Curt Mfg. verified that the Class III receiver hitch, # C13352, will fit on your 2004 Ford F150 styleside (stepside) pickup as long as it is the new body style truck and not the Heritage series truck which is the old body style. I provided a link to the installation instructions for you to review also.
  view full answer...

Do you have a question about this Trailer Hitch?