bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11425
Our Price: $171.91
You Save: $109.04
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 32 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed


Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11425 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (4)
  • Q & A (0)
  • Videos (1)
  • Photos

CURT Trailer Hitch - C11425

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

11425 Curt Class 1 Trailer Hitch Receiver

Installation Details C11425 Installation instructions

This Product Fits The Following Vehicles

Video of Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Trailer Hitch Installation - 2015 Chevrolet Cruze - Curt

Today we're going to be reviewing and installing the Curt Class I Trailer Hitch Receiver, which is a 1-1/4-inch tube receiver, part number C11425, on our 2015 Chevrolet Cruze. This is what the hitch looks like once it's installed on our vehicle. You can see it's got a 1-1/4-inch receiver tube opening. It's got this nice reinforcement collar here. We've got the 1/2-inch hitch pinhole, the safety chain loops, and then back here nice and tucked away, we've got the crossframe for the hitch, and it bolts up to the factory holes that are in the frame. Now, it also has this nice powder coat finish. With this, it has a 200-pound tongue weight rating and a 2,000 gross trailer weight rating. When you're using non-trailer loads, such as bike racks or cargo carriers, Curt recommends that you use a support strap, part number 18050, which you can find on our site.

In order to get an idea what kind of distances you'll be looking at for any accessories you might have, the distance from the center of the hitch pinhole to the further back part of the bumper is about 4-3/4 inches, and the distance measured from the ground to the bottom of the receiver tube is 9 inches. Now, we'll show you how it's installed. First thing we want to go ahead and do once we've come under our vehicle is we're going to want to drop this exhaust to give ourselves a little bit more room to work. In order to do that, we're going to drop this whole hanger out of here. We're going to use a 13mm and take that bolt out. Once we have that bolt out, we can push it out a little bit because it's got this little hook here on the back side just to help secure it in place a little bit more.

Once we've got that out of the way, that gives us a little bit more room to work. We're going to take our rectangular flat washer with the square hole in the center, and take our carriage bolt and we'll put that through there. Grab one of our fish wires and you just want to spin that on there. We're going to take it and send it through this rear access hole. I'm going to send it all the way back to this rearward most hole on the subframe. Sometimes it takes a little twisting, but you can get it.

Then, what I want to do is take this washer, put it up the wire just a little bit from the bolt. That way you can feed them in separately, but then they'll both pull down into place just like you need them. I put a little bit more of a bend in the end of this one in order for it to come back down pretty quick through this other hole. Put in that washer just up a little bit further from the bolt and pull them down into place. I've already done the other side, so I'm going to leave these fish wires right here to help guide them through the holes on the hitch as we put it into place. You want to grab a second set of hands to put this hitch up. What we're going to start with doing is on the exhaust side is put the fish wires through the holes, and we'll feed this exhaust side up first, so we can get it over the exhaust and get the other side up.

Then, take these fish wires off and get the nuts started. Then, we can get ready to tighten them down before we torque them. Now, we'll take our 3/4-inch socket and tighten it down, get it pretty snug. Now, let's get both sides torqued down to what's specified in the instruction manual. We'll do that on both side. Now that we've got those bolts all torqued down, let's put our exhaust back into place. Now, remember we've got this little hook on the back side and there's a little opening right up here what that goes into. Once you've got that tight, you're done putting the hitch in. That's going to complete our look at the Curt Class I Trailer Hitch Receiver, part number C11425, on our 2015 Chevrolet Cruze.

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11425

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


The trailer hitch is still hauling my mountain bike all over the U.S. without any issues.

The hitch is still working great like day one. So good I actually ordered another one for our second jeep. Solid product and install videos
Paul - 05/11/2022


I've been wanting to get a small truck for a few years in order to move items that are too big for a car but overall they are small things. A freezer a mattress, small trees, etc.

Now i have a very stable hitch! That i can pull a small trailer with and i can take care of these things and the cost was minuscule.

This product is great! The install was 10 mins with a 2nd person helping the instructions and hardware provided were easy to understand and use.

2015 Chevrolet Cruze

The hitch installed very fast. It is heavy almost seems overbuilt.

2015 Chevrolet Cruze


See what our Experts say about this CURT Trailer Hitch

  • Comparing Curt Trailer Hitches for a 2015 Chevy Cruze LT
    There are some subtle differences between Curt trailer hitches # C11282 and # C11425. The receiver is longer on # C11425 and they don't have all the same vehicle fits. Hitch # C11282 fits the 2011 to 2015 Cruze excluding diesels models, 2016 Cruze Limited models, and the 2012 to 2017 Buick Verano excluding turbo and dual exhaust models. Hitch # C11425 fits 2016 Chevrolet Cruze Limited models and 2015 Chevrolet Cruze models except for the diesel models. If it were me I would go with #...
    view full answer...
  • Do 2016 Chevy Cruze LS and Limited Have the Same Hitch Fits
    The hitches that are confirmed to fit a 2016 Chevy Cruze LS and Limited are different part numbers. The profile and mounting location of the hitches for these two trim models are vary significantly. We have the 2016 Chevy Cruze Limited listed separate fit guide listing, as if it is a different vehicle all together, not just a different trim model. I have included a link to the hitches that are confirmed as a fit for each vehicle listing. There are two hitches for each vehicle listing....
    view full answer...
  • Parts Needed For Carrying a 2 Bike Rack With a 2016 Chevrolet Cruze Limited
    As the only receiver available for your 2016 Chevrolet Cruze Limited is a 1-1/4" you will need to use an Adapter # HTAD to carry your 2" hitch bike rack. Do note that the adapter will reduce your hitch weight by 50%. I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24882 for your Cruze. This receiver does not require using Stabilizing Straps # 18050 like the Curt # C11425. While both receivers are rated up to 200lbs of tongue weight be sure to verify the maximum amount your...
    view full answer...
  • Curt Trailer Hitch Receiver That Fits 2016 Chevy Cruze Limited
    I checked with the manufacturer, and can verify that the only Curt trailer hitch receiver that fits your 2016 Chevy Cruze Limited is the Curt Trailer Hitch Receiver # C11425. The other option you were referring to is actually not a fit for the Limited, it is only a fit for the standard Cruze. I have added a link to the instructions as well as a video install for you to check out. If you plan on doing some light towing with your 2016 Cruze Limited, you'll need some other parts, which I'll...
    view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.