Put your ATV to work preparing a food plot for planting. This disc harrow works the soil, and the cultipacker firms the seedbed and presses in seed. With the electric lift, you can raise and lower the implement from your seat between passes.
Preparing a food plot starts with working the soil. The included disc harrow breaks up packed surface soil and works larger clods into smaller pieces as you pull it behind your ATV or UTV. This gives you loosened ground to work into a seedbed instead of trying to plant in a hard, uneven surface.
Eight rotating steel discs do the cutting, with four on each side. Set the sections straight for lighter soil work or angle them at 15° or 30° for more aggressive passes. The discs can face inward to gather loosened soil toward the center or outward to move it toward the sides. Work in manageable passes rather than expecting one trip to break up heavily compacted ground.
After discing, loose dirt and remaining clods can leave an uneven seedbed. Switch to the included cultipacker to break down smaller clods and firm the worked soil before planting. After spreading seed, make another pass to press it against the prepared ground for better seed-to-soil contact.
The raised packer wheels roll across the surface, pressing the soil rather than digging into it. The wheels work remaining clods apart and push seed into contact with the ground. The roller mounts to the included lift's crossbar using its axle and bearing brackets.
Moving between work areas and making repeated passes calls for raising and lowering your attachment. The included electric implement lift uses an actuator to raise the disc harrow or cultipacker for travel and lower it for work. Strap the control grip to your ATV's handlebar to operate the switch from your seat, or remove it to operate the lift from nearby. The parallel linkage keeps the attachment at its working angle as it lowers.
The lift slides into a compatible 2" x 2" rear receiver and secures with the included hitch pin and clip. The included 9' wiring harness connects to your ATV or UTV's 12V battery or an auxiliary battery. Some assembly is required. You'll need a 3/4" wrench and 3/4" socket (PTW38524 - sold separately), plus a torque wrench (PT87ZR - sold separately) to tighten the four pivot joints to 70 ft-lbs. You'll also need a wrench or socket that fits your battery terminals.
The lift and implement put extra weight on the rear of your ATV. The Black Boar suspension lock (CAM85PC - sold separately) supports the rear suspension to limit sag during implement work. Remove its center bar when you're finished.
The disc harrow and cultipacker are just two Black Boar implements that work with the included electric lift. The chisel plow (CAM75PC - sold separately) loosens packed ground with individual teeth, and the plugger (CAM92PC - sold separately) pulls small soil cores to aerate lawns and food plots. Beyond planting, the scrape blade (CAM25PC - sold separately) grades loose dirt or gravel, and the landscape rake (CAM65PC - sold separately) clears loose debris and smooths worked areas. Add the implements that match your other jobs without buying another lift.
If the disc harrow isn't penetrating firm soil deeply enough, the Black Boar weight basket (CAM52PC - sold separately) mounts behind the lift's crossbar to add downward force. It holds two concrete blocks (not included). The basket also works with other ground-penetrating implements, including the chisel plow and plugger.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.












Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.