Product Experts Available Now!
Call 1-800-940-8924
We'll connect you with nearby partnered installers who know this exact setup.
Roadmaster Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Red LEDs
Part Number: RM-152-LED
In Stock
$108.38
Retail:$190.98
You Save: $82.60
Confirmed to Fit
2002 Chrysler Sebring
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (447)
- Q & A (0)
- Photos
2002 Chrysler Sebring - Roadmaster Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Red LEDs
- Bulb and Socket Kit
- Bypasses Vehicle Wiring
- Roadmaster
- Universal Fit
These lights get turn and brake signals on your towed car without splicing into its wiring. They mount inside your Chrysler Sebring's tail light housing, with the wiring out of sight. The LEDs are efficient, long-lasting, and bright. 450 Lumens per bulb.
Features:
- Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring
- No risk of damage from electrical feedback
- No effect on your warranty
- Mounts inside car's tail light housing
- Requires a 1" diameter hole drilled into the tail light housing
- Shines brighter and more efficiently than incandescent bulbs
- Includes wiring, 2 red bulbs, 2 sockets, and installation hardware
- Requires additional harness with 4-flat plug to connect to motorhome sold separately
- Made in the USA
Specs:
- Wiring harness length: 27'
- Light output per bulb: 450 lumens
- Overall length of bulb: 2-1/2"
- Length of bulb from flange to top of bulb: 2"
- Hole required for sockets: 1" diameter
- Wire loom:
- Length: 3'
- Diameter: 1/2"
- Limited lifetime warranty
Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
152-LED Road Master Tail Light Wiring Kit for Towed Chrysler Sebrings - LED Bulb and Socket
Installation Details
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.7
447 reviews
by:
DIY Bill
09/05/2022
1997
Nissan
Pickup
This kit did the job very well. I could have bought each part separately and saved some money, but I went with the comfort knowing all these parts will work together to accomplish the job. I couldn't figure what LED bulb to use for both brake and turn signal. I routed the wire along the truck wiring harness for half the way to the front, then slipped it into the frame channel for the rest of the way. I used a Curt heavy, round 4 pin plug at the front grill. It was a bit of work and took many hours but came out clean!
by:
NormB
02/28/2021
2008
Jeep
Liberty
I wanted a tail light system that would operate off of my motorhome, but didn't tie into my towed vehicles wiring. This kit did the trick! Led bulbs are super bright! Kit has everything you need for a smooth install.
Normb
2/28/2022
Still working great. Nice bright lights
by:
Harry F
12/28/2019
I have had these lights installed for over a year. I tow a Kia Nero on a tow dolly with my motorhome. Even though the dolly has tail lights, I wanted my car to have tail and brake lights as well. I installed these lights inside the Kia taillight assembly and spliced them into the dolly wiring harness. The lights work great, very bright. The hardest part was figuring out how to install them inside the taillight assembly since they were not made for the Nero. There was no Nero kit available.
by:
David
05/22/2025
Easy instructions, fast shipping.
by:
Doug H.
07/27/2017
2014
GMC
Sierra
Installed LED tail light wiring kit (Brake, Tail & Signal) in 2014 GMC Sierra taillights. For towing behind motor home. LED lights are brighter than incandescent. Installation instructions easy to follow.
by:
Dennis
09/12/2019
I bought this item from etrailer and they installed it free at their business. It has worked well. Altho, only one problem. I hooked up today to the motor home, and the turn signal portion on the right side did not work. I am sure it is only a wiring problem. Plan to check it soon. But, would still buy it again. etrailer is a great group of people to work with.
by:
Barry
12/22/2019
2019
GMC
Canyon
I purchased this taillight option because didn't want to go to the expense of the wiring kit with the diodes, etc. Since I have to disconnect the battery in this vehicle for towing, I needed to use the power from the motorhome trailer plug. I followed the directions and video and the kit was installed as they depicted and it works great. The LED lights are very bright and light up the top half of the taillight assemble which is more than ample.
by:
Richard
06/17/2021
The roadmaster tail light kit is an easy DIY kit that comes with all I needed for install on 2012 Chev Colorado . The hardest part was trying to crawl under the truck to run the wires. The lights are seperate from the Colorado and are very bright.
by:
Bob
09/30/2021
Very happy with the with the LED Bulb and socket set. A great install job by etrailer, and without messing with the towed vehicles wiring system. Wish this had been around years ago! Stellar,a five star product
by:
Mark
06/09/2023
I installed this on our 2019 Equinox towed. Love the convenience of just plugging in the towed vehicle. The most difficult part was deciding on what part of the light housing to drill the hole for the light socket.
by:
Jim
01/01/2020
These lights are BRIGHT! Easy install. I needed about 10 more feet of 4-strand wire, however. Ended up having to splice some together.
Jim H.
1/2/2021
Tail light LED sockets are bright but leak water and condensation in my tail light assembly.
by:
Alam
11/13/2018
2005
Mini
Cooper
I bought separate LED lights for the brakes light and turn signals of the towed car. I also have a braking system attached to the car that will press on the brake of the car. Question - will the car brake light and the led brake light both come on at the same time and is this a problem.?
Thanks for your help
Thanks for your help
by:
Micheal
09/18/2018
2018
Chevrolet
Malibu
This product had a great etrailer installation video specifically for my car. the only problem was that there was not enough wire! I had to go to O'Reilly's to buy more wire.
by:
Martin
08/24/2022
GMC
Yukon
Easy install just like the tutorial video showed!
I used a step drill from Harbor freight. Allow the bit to do the cutting and it didn't crack my housing.
The hardest part was deciding how to route my cables. Came with enough wire to mount in my GMC Yukon.
I used a step drill from Harbor freight. Allow the bit to do the cutting and it didn't crack my housing.
The hardest part was deciding how to route my cables. Came with enough wire to mount in my GMC Yukon.
by:
Peggy
08/09/2018
2018
Chevrolet
Spark
I have always had great customer service with etrailer. Spent a lot of money. I bought the complete towing package for my 2018 Chevy Spark. Everything looks great.
by:
Max Whitt
01/27/2017
2014
GMC
Sierra
Installation was straight forward, and in my situation easy. I have used every system on the market and this system is by far the best if it will fit in your lens. I installed it on a 2014 GMC Sierra which requires the ground cable to be removed when towing, so in my case grounding to the truck was useless - just use the ground from the tow vehicle. Also a 7/8 hole saw works better than the 1" that is called far.
by:
Douglas
05/17/2022
looks well made will try to install it tommorrow, I like the LED bulbs =, only wish Roadmaster would have included a 4 pole pagtail to plug the finished install into my motorhome. I will need to visit a autp parts store tommorrow for that piece.
by:
Gary
06/06/2022
So glad I got this kit! Running the wires from front to back was the hardest part. I really liked not splicing into my existing factory lighting wiring.
by:
Douglas
10/27/2021
Chevrolet
Spark
Wired a 2021 Chevrolet Spark. Good videos availability for help with installation. Several possible methods to route wire from front to back.
by:
David
04/25/2018
1989
Jeep
Cherokee
Easy to install and no exposed wiring. Make sure you have room in the back of your tail lights for the socket assembly - I should have checked first because I had not a lot of room to work with but in the end they fit just fine.
by:
James
02/20/2025
Great customer service. Immediate feed back. If something is not right, they immediately fix it. Great company
by:
Otis
10/30/2021
As always the service and delivery was what we have received from the first order years ago up to the latest.
Pricing has always been right, why would we look any other place than ETrailer.
Thanks
Pricing has always been right, why would we look any other place than ETrailer.
Thanks
by:
Ronald
06/12/2021
Easy application and fast service. Good installation video to follow.
by:
Doug
06/21/2021
Exactly as described. Easy to follow instructions/guides.
by:
Thomas
06/29/2022
Loved the product, easy to install and have showed off many times while we wintered in Texas. I would have loved to take the credit for idea but was happy to let them know where I bought from.
Thomas
6/30/2023
No issues. Still looking like it’s newly installed
25
447
true
Show More Reviews
See what our Experts say about this Roadmaster Flat Tow Wiring Harness
- Parts Needed to Flat Tow 2013 Jeep Wrangler Unlimited with Aftermarket Bumper that Has D-ringsFlat towing a vehicle such as a Jeep Wrangler behind a Class C motorhome such as the Dynamax Force 37BH HD will require a few items including the tow bar and braking system. The Blue Ox Patriot braking system # BLU37TR that you referenced is a very good selection. I linked overview articles on flat towing that cover each of the items needed. These are a good starting point. But first I suggest you check with the bumper maker to confirm it is rated for towing. Not all aftermarket bumpers...
view full answer...
- Parts Needed to Flat Tow a 2018 Ford Fiesta SE HatchbackI would love to help you get absolutely everything that you need to flat tow your 2018 Ford Fiesta SE Hatchback. However, Blue Ox does not make a base plate kit for the non EcoBoost model therefore I recommend you use Roadmaster instead. I typically prefer Roadmaster anyhow as they offer more options for flat towing equipment. I have attached a list of all the parts you will need below: Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 Roadmaster Direct-Connect Base Plate Kit part...
view full answer...
- Parts Needed To Flat-Tow a 2019 Chevrolet Equinox with 2.0 TurboYes, the Roadmaster Direct-Connect Base Plate Kit part # RM-523193-5 is a fit for your 2019 Chevrolet Equinox with the 2.0L turbo engine. I checked with Roadmaster to confirm this for you as well. Also, you do not have hydroboost power assist brakes so no need to worry about that for the InvisiBrake. In order to complete your flat-towing setup you will also need a tow bar, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may also...
view full answer...
- Flat Towing Base Plates for a 2010 Mini Cooper S HartopI reached out to Blue Ox and there is not a confirmed fit for your 2010 Mini Cooper S Hardtop, but I do have a solution for you. I recommend the Roadmaster EZ Base Plate Kit - Removable Arms # 521877-1 which is confirmed to fit your Model S Hardtop. Then I recommend the Roadmaster Falcon 2 # RM-520 for your tow bar and # RM-643 for your safety cables. You can use the plugs # RM-210 when not in use if desired. For your wiring, I recommend the Roadmaster LED Bulb and Socket Kit # RM-152-LED....
view full answer... - Which Roadmaster Tor Bar Lighting Kit for 2025 Ford RangerHey Terry, I am not sure what your installers reason for the Roadmaster kit part # RM38FR not working on your 2025 Ford Ranger but we have checked with Roadmaster and they have told us that this is a correct fit and will work great. Could you get him to be more specific with why? The bulb/socket kit like the part # RM-152-LED is actually not listed as a fit for your truck though so I would not recommend going that route.
view full answer... - Bulb With Socket Kits and Wiring Kits For Flat TowingHere is a list of the different bulb and socket kits we currently offer. Roadmaster Tail Light Wiring Kit with Bulbs # RM-155 Blue Ox Tail Light Wiring Kit - Bulb and Socket # BX8869 Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red # RM-152-LED-7 Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red # RM-152-LED Blue Ox Tail Light Wiring Kit for Towed Vehicles - Integrated LED Bulb and Socket - White # BX88269 Blue Ox...
view full answer... - Can a 2016 Honda Civic be Flat-TowedAccording to the owner's manual for your 2016 Honda Civic, if the vehicle has a manual transmission then it can be towed behind a motorhome with all four wheels on the ground. From my research, the tenth generation which is what you have from 2016+ plus is flat towable whereas the ninth generation from 2012-2015 is not flat towable. In order to flat-tow the vehicle you going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly...
view full answer...
- Can 2018 Chevy Equinox be Flat Towed Safely and Part Needed to Flat TowHaving an issue come up 100 miles past the warranty must have really stung so I totally understand your trepidation. That said, you can flat tow a 2018 Chevy Equinox front wheel drive with a 1.5L Gas or 1.6L Diesel as well as the all-wheel drive with a 1.6L Diesel and there should not be any issue with flat towing this car so long as you follow the recommended procedures in the owner's manual to do so (which you can find on page 359 of the online manual). That includes running the vehicle...
view full answer... - Parts Needed to Flat Tow a 2010 Ford Explorer Sport Trac 4x4 Behind a Motor HomeWe have all of the parts you are looking for to flat tow your 2010 Ford Explorer Sport Trac 4x4, however, I did some research on your vehicle and it looks like you may need a Neutral Tow Kit from Ford to complete the flat tow setup for your Sport Trac. I recommend checking your owners manual or contacting Ford for any specific procedures or restrictions on flat towing your vehicle. For a base plate kit, you can use the Demco base plate kit, # DM9518199. They're really concealed and there's...
view full answer... - Recommended Flat Tow Wiring Kit For A 2019 Jeep Grand Cherokee The 2019 Jeep Grand Cherokee is not compatible with bulb and socket kits from Roadmaster like the # RM-152-LED that you referenced. Bulb and socket kits will actually cause much more harm since you'd have to drill into the tail light housing and run the risk of damaging the light and will typically also face issues with water leaking into the taillight through the hole the bulb and socket kit uses. You'd be much better off just using a splice in kit like the Roadmaster Diode 7-Wire to...
view full answer... - What Color Are the LEDs That Come With the Roadmaster Tail Light Wiring Kit for Towed VehiclesThe Roadmaster Tail Light Wiring Kit for Towed Vehicles part # RM-152-LED comes with red LEDs which are needed because with LEDs you must use a bulb color that matches that of the tail light housing in order to get a true color. The bulb type that is used is indeed an 1157 so there would be different intensities based on if the stop or tail lights were activated. Please note, the Replacement LED Bulbs and Sockets part # RM-152-2 are just the replacement LEDs for the Roadmaster Tail Light...
view full answer... - Flat Towing Wiring Kit for 2019 Chevrolet EquinoxIf you have the 2019 Chevrolet Equinox Premier you can use Roadmaster diode wiring kit # RM-15267 along with 6-pole plug # RM-910030-8 that you will install in place of the included 7-way. An article on wiring is linked to assist you with this process. If you do not have the Premier you'll instead need one of the kits shown on the linked page, such as magnetic light kit # TL21RK or bulb and socket kit # RM-152-LED.
view full answer... - Are Curt Base Plates on 2018 Chevy Equinox Compatible With Roadmaster Falcon 2 Tow BarI reached out to Curt, who said you can use the Curt Custom Base Plate Kit # C28FR with your 2018 Chevy Equinox and the Roadmaster Falcon 2 Tow Bar # RM-520 so long as you use an adapter designed for Blue Ox base plates. So what you need is the Roadmaster Tow Bar to Blue Ox Brackets Adapter # RM-031. As far as the wiring kits on your '18 Equinox (excluding Premier) the LED and standard bulb and socket kits, which are the Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and...
view full answer... - Parts Needed to Flat Tow 2022 Chevy Spark ACTIVWe always recommend that you refer to your vehicle specific owners manual for confirmation of a specific vehicle model and trim package can be safely flat towed. The vehicle's OEM is the authority on capability of what they built. To flat tow your 2022 Chevy Spark ACTIV, you will need 5 basic components. These are base plates, tow bar and safety cables, wiring for indicator lights, and supplemental braking. - Base Plate, Blue Ox Base Plate Kit # BX1725 - Tow Bar, Blue Ox Alpha 2 Tow...
view full answer... - Do Blue Ox Base Plates Fit 2021 Chevy Spark ACTIV & Parts Needed to Flat TowI checked with Blue Ox, and the Blue Ox Base Plate Kit # BX1725 will fit your 2021 Chevy Spark ACTIV with a manual transmission. I have added cut out for you from the linked installation instructions from these base plates which shows the base plates on this vehicle. Along with the tow bar you asked about, there are a number of other parts needed to flat tow your 2021 Chevy Spark ACTIV with manual transmission, so I'll make a list for you to make it easier. - Base Plate Kit: Blue Ox Base...
view full answer...
- Recommended Flat Towing System for 2017 Chevy Sonic Behind MB Sprinter MotorhomeFor your 2017 Chevy Sonic, I recommend starting with the Roadmaster Direct-Connect Base Plate Kit # RM-523192-5 for a sedan or # RM-523194-5 for a hatchback. Then I recommend the Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-520 along with the safety cables # RM-643. Then for the vehicle wiring I recommend the Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red # RM-152-LED which I recommend connecting to your motorhome with the...
view full answer... - How To Power Brake Lights On A 2020 Chevrolet Equinox While In Tow ModeThe stop light circuit on a 2020 Chevrolet Equinox will go dead while in tow mode after a few minutes of inactivity so in order to use the vehicle's taillights to signal you will need to install a stop light switch kit, the Roadmaster Stop Light Switch Kit part # RM-751489. This will then work alongside the Air Force One Supplemental Braking System part # SM99243 as well. I have attached for you below a list of other parts you may need. Roadmaster Direct-Connect Base Plate Kit part # RM-523193-5 Roadmaster...
view full answer... - Can 2018 Chevy Equinox All Wheel Driver Model Be Flat or Dolly TowedAccording to the owner's manual, only Diesel AWD models are capable of being flat towed, and AWD equipped vehicles are not capable of being dolly towed. Otherwise, the only way to tow the vehicle without damage is on a trailer. I've done some research, and haven't been able to locate any references that indicate that shutting off the AWD system would enable the vehicle to be dolly towed, I'm sorry to say. If the vehicle is a Diesel, to flat tow it you'd need a tow bar, base plates, safety...
view full answer... - Parts Needed to Flat Tow 2019 Chevy EquinoxTo properly and safely flat tow your 2019 Chevy Equinox you are going to need a base plate kit, tow bar, safety chains, a wiring kit, a supplemental braking system and likely a high-low adapter. I'll list the best parts for you: - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # RM-523193-5 - Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (if the Equinox is a Premier model)...
view full answer...
- Are Flat Towing Parts for 2016 Chevy Equinox the Same as 2019 Chevy EquinoxThe parts to flat tow a 2016 Chevy Equinox and 2019 Chevy Equinox are different because the vehicle underwent a style change but if you are looking to flat tow both I'll give you what you need for each, starting with a 2019 Chevy Equinox: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519332 - Tow Bar: Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (if the Equinox is a Premier model) OR Roadmaster...
view full answer... - Parts Needed to Flat Tow a 2020 Chevrolet Sonic HatchbackYes, According to the owners manual for your 2020 Chevrolet Sonic Hatchback you can flat tow your Sonic with automatic transmission. I have included a list of the parts you will need, as well as a recommendation for each part. You will want to make sure you consult the owners manual for your Sonic to be sure you complete any requirements/recommendations from the manufacturer before towing your Sonic. Base Plate Kit: This Provides the attachment point for the tow bar coming from your RV....
view full answer... - Recommended Supplemental Braking System for a 2021 Chevy Equinox Towed by an RV w/ Air BrakesSince your 2007 HR Neptune XL motorhome has air brakes you will want to use the Demco Air Force One Supplemental Braking System item # SM99243 with your 2021 Chevy Equinox. This system has been specifically designed to work with RVs equipped with air brakes like yours. This a proportional braking system that will stop with the same force that you are using to slow or stop your RV. I have linked an installation video below. The Demco SBS Second Vehicle Kit item # SM99209 you were looking...
view full answer... - Parts Needed for Roadmaster Invisibrake and Tail Light Wiring Kit for a 2016 Chevrolet SonicYou need to have a diode kit installed regardless of which braking system you are using, this is what lets you connect your RV's tail, brake, and turn signal lights to your towed car's lighting system so that your brake lights and turn signals illuminate. This is a requirement for flat towing. You can use the Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED to accomplish this. You will also want the Roadmaster FuseMaster Fuse Bypass # RM76511 which replaces your Chevrolet...
view full answer... - Recommended Wiring to Flat Tow my 2008 Jeep WranglerI have a great option but the Roadmaster Tail Light Wiring Kit for Towed Vehicles part # RM-152-LED is not a confirmed fit for your 2008 Jeep Wrangler JK Sahara edition. It comes down to the inserts being too long and interfering with the standard lights. I recommend going with the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56200 it is the best of both worlds it plugs in between the factory connector so you are not splicing into anything but it also doesn't require...
view full answer...
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Michael B
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Shelly K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Matthew E
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Diy B.
9/6/2023
We took the toad on a 4200 mile trip out West and back. The lights worked perfectly and look nice and bright too!