Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord

See what our Experts say about this Demco Tow Bar Wiring

• Are There Replacement Baseplate Adapters Available For A Roadmaster Eagle 8000 Tow Bar
  I spoke with Roadmaster and unfortunately the Eagle 8000 tow bar has been discontinued for 15+ years so there are no longer any compatible replacements available for it. If you didn't want to have to purchase newer tow bar then you would need to use a Demco baseplate like the Demco Tabless Base Plate Kit # DM9519332. This baseplate will require you to trim/remove the lower active air shutters in order for it to fit, just like you would with any other baseplate.
  view full answer...
• Where to Find Price of Demco Flat Towing Products
  The 9519336 is the same as the # DM9519336 and the 9599006 is the same as the # SM99251. The price for these and all of our products can be found on the product page. We do not carry the 9523157. If you want custom wiring you can use the Curt # C96JR or if you want to stick with Demco you can use the universal # DM9523010-54.
  view full answer...
• Replacement Demco Coiled 7-Way To 6-Way Diode Wiring Kit Cable
  If you're just wanting the 7-wire to 6-wire cable from the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 then you'll want part # DM9523054. This will also include another 6-way socket, which you can hang onto as a backup if you ever have an issue with your current one.
  view full answer...
• Does Flat Towing 2016 Ram 1500 Require Brake Light Relay With Demco 7-Wire to 6-Wire Connector
  Your 2016 Ram 1500 will not require a brake light relay, the RV turn signals will not override the brake light when you are using the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54.
  view full answer...
• Flat Tow Parts for 2021 Jeep Wrangler Using etrailer Invisible Base Plate Kit
  The etrailer Invisible Base Plate Kit with Removable Arms, # e98948 does not include safety chains. This is a custom-fit base plate that provides the needed attachment points for your tow bar. With this option, the tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. It is a simple, bolt-on installation with included hardware. For a complete flat tow kit for your 2021 Jeep Wrangler, you will also need the tow bar, safety chains, a wiring solution for...
  view full answer...
• Recommended Flat Tow Setup for a 2014 Chevy Captiva Sport
  I can definitely help you out with parts to flat tow your 2014 Chevy Captiva Sport. I really like the Demco setup you were looking at because Demco offers a few kits that include just about everything that you need, plus they have very nice tow bars that will last you a long time which you can use on future vehicles you choose to flat tow. For a base plate kit use part # DM9518218 and the the Demco tow bar I recommend is the Dominator # DM9511008 because it has a 7,500 lb weight capacity...
  view full answer...
• Can 2010 Jeep Grand Cherokee 4WD Quadra–Trac II be Flat Towed and Parts Needed
  I took a look at the online owner's manual for your 2010 Jeep Grand Cherokee, and under the "Recreational Towing" section your Quadra–Trac II model CAN be flat towed because it has a neutral transfer case, which is exactly what you described. If you go to page 340 (of the online manual, yours may be different) it explains exactly how to transfer into neutral, which you will do before towing. Since you mentioned Demco, here are all the parts you will need from Demco to flat tow your 2010...
  view full answer...
• Does 2020 Buick Envision Need Brake Light Relay and Which is Easier Blue Ox or Roadmaster Setup
  Does our Allegro have trailer wiring already present at the rear of the vehicle? Like with a 7-way connector? If so the circuits are already combined regardless of what you see on the vehicle taillights. If you plan to use a diode kit or bulb and socket tow bar lighting solution you will need a brake light relay like # RM-88400 when using the brake system you mentioned so that the brake lights won't override the blinkers. It's a toss up on which is easier to use between the Roadmaster...
  view full answer...
• 2018 Chevrolet Equinox Flat Tow Wiring Needs
  The Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 is going to allow you to run your vehicles existing 4 pole harness to the front to connect to your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. If you already have the wiring you need the Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round # A10-6034VP and the Hopkins Heavy-Duty, Coiled Trailer Connector Adapter - 7-Way to 6-Pole Round...
  view full answer...
• Best Parts to Flat Tow 2021 Kia Soul With Manual Transmission
  There are a number of parts you will need in order to flat tow your 2021 Kia Soul with a manual transmission, and I'll be happy to recommend the best parts that are the easiest to use for you. The best parts for you are the following: - Base Plate Kit: Blue Ox Base Plate Kit # BX2727 - Tow Bar: Blue Ox Alpha 2 Tow Bar # BX7380 - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 - Supplemental Braking System: Demco SBS Stay-IN-Play...
  view full answer...
• Tow Bar and Flat Tow Parts Needed for Heavy 2020 Ram 3500
  We can definitely get you a flat tow set up for your 2020 Ram 3500. These trucks are heavy, but the GVWR you are referring to is the gross weight, which is the max weight it can be when loaded with passengers and cargo. According to my research, a 2020 Ram 3500 has a curb weight (unloaded) of up to just over 7,500 lbs max. So even if you have some cargo in the truck, it is difficult to imagine you will be exceeding the 10,500 lb tow bar option you can use with a 2 inch hitch on your motorhome,...
  view full answer...
  
• Using Demco Aluminator Tow Bar With Roadmaster EZ Base Plates on 2008 Toyota Yaris
  Your Demco Aluminator tow bar is compatible with the Roadmaster EZ Base Plate Kit # 521181-1 that fits your 2008 Toyota Yaris, you will simply need an adapter, the Roadmaster Tow Bar Adapter # RM-032. As for the other parts needed to flat tow your 2008 Toyota Yaris with a Demco Aluminator tow bar, here is a list of everything you will need, and I'll include the base plates and adapter. - Base Plate Kit: Roadmaster EZ Base Plate Kit # 521181-1 - Roadmaster Tow Bar Adapter # RM-032 - Safety...
  view full answer...
• Difference Between Blue Ox and Demco Wiring Kit for Flat Towing 2019 Jeep Wrangler
  There is really only one difference between the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 and the Blue Ox Tow Bar Wiring Kit # BX8848, which is that the Demco comes with the 7-Wire to 6-Wire cord as well as a vehicle-side 6-way while the Blue Ox kit requires those be purchased separately. So if you were to go with the Blue Ox Tow Bar Wiring Kit # BX8848 you would also need the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord...
  view full answer...
• Troubleshooting A Non-Working Light Function With Diode Wiring
  Since the diodes in the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 use spade terminal connectors the easiest way to test the diode would be to swap the connections on the diode in question and test your light functions to see if the terminal on the diode is the issue. If it randomly stopped working then the cause is typically just a loose connection or a bad ground so I would check the connections and make sure there's no damage...
  view full answer...
• Recommended Flat Towing Wiring Harness for a 2023 Ford F-150 w/ LED Lights
  No, it will not. Since your 2023 Ford F-150 has LED tail lights you will need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item # RM38FR. The issue is that the brake and running lights will all be the same brightness with the standard diodes included in the Demco item # DM9523010-54. The diodes in the Roadmaster item # RM38FR kit convert the 12V signal from your RV's wiring to a 9V signal which allows the differentiating brightness needed between...
  view full answer...
• Parts Needed to Flat Tow 2021 Ram 1500 Classic Warlock
  We do indeed have the parts needed for you to flat tow your 2021 Ram 1500 Classic Warlock, which I'll go ahead and list out for you: - Base Plate Kit: Blue Ox Base Plate Kit # BLU74FR - Tow Bar: Blue Ox Avail Non-Binding Tow Bar # BX7420 - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 - Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System # DM86VR I verified with Blue Ox for you that the base plates do fit your 2021 Ram 1500...
  view full answer...
• Blue Ox Base Plates & Parts to Flat Tow 2021 Ford F-250 Super Duty
  We have you covered with all the parts you'll need to flat tow your 2021 Ford F-250 Super Duty, including the Blue Ox base plates. These are a really nice choice because there isn't any part of the base plate showing except for the tabs, which are removable when you aren't flat towing your truck, which ensures it keeps it's aesthetic. The list of all the parts you need to flat tow your 2021 F-250, including the base plates, is the following: - Base Plate Kit: Rodmaster Direct Connect...
  view full answer...
  
• Can I Flat Tow a 2021 Jeep Wrangler with a Smittybilt SRC Front bumper?
  The Smittybilt SRC Front bumper on the 2021 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars Item # RM-035 to tow with the D-rings on your bumper. To flat tow your 2021 Jeep Wrangler you will also need, a tow bar, safety cables, supplemental braking system, wiring and possibly a high low adapter. Tow Bar- Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar item # RM-422 Safety Cables- RoadMaster...
  view full answer...
• Recommended Flat Towing Set Up for a 2024 Buick Encore GX
  Yes, it will. The Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System item # RM-766 is not only compatible with your 2024 Buick Encore GX but it is recommended to be used by Roadmaster. This a great part that makes disconnecting and reconnecting your battery extremely simple. Here are some other parts you will need to flat tow your 2024 Buick Encore GX: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar 2" Hitch - 6,500 lbs item # BX7380 Base...
  view full answer...
• How To Install Tow Bar Wiring On Vehicle With Separate Brake Signal And Turn Signals
  When installing tow bar wiring on a vehicle with separate brake and turn signals that will be flat towed you would want to use a diode kit like the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54. When installed it will make your brake lights flash as the turn signals instead of your actual amber turn signals when being flat towed. If you wanted to keep the separate wiring for flat towing you would need the Vehicle to Vehicle Tail Light...
  view full answer...
• Can You Order Just 7-way to 6-way Cord From Demco Diode Kit DM9523010-54?
  Yes we sell just the 7-way to 6-way cord included in the Demco # DM9523010-54 you were looking at without getting the diodes. You'll need # DM9523054, though it will come with a new 6-way plug that you can keep as a spare. There's no way to order it without that plug as well.
  view full answer...
• Parts Needed to Flat-Tow a 2002 Jeep Liberty
  In order to flat-tow a 2002 Jeep Liberty you'll need a few different items such as a base plate kit, tow bar, safety cables, lighting harness, and supplemental braking system. I have attached a list with each of these parts for you below. etrailer Classic Base Plate Kit part # e98970 etrailer XHD Non-Binding Tow Bar part # e94ZR Demco 4-Diode Universal Towed Vehicle Wiring Kit part # DM9523010-54 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 This is a complete...
  view full answer...
• Recommended Tow Dolly For A 2010 Ford Ranger
  The online manual for a 2010 Ford Ranger doesn't list anything about dolly towing the vehicle but does state that manual transmissions can be placed in 2WD and flat towed, so you're more than likely fine to dolly tow your Ranger, but I recommend double-checking with your local Ford dealership to ensure there isn't anything else that would prevent you from doing so. If you haven't purchased your tow dolly yet then I recommend the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes # DM9713093....
  view full answer...
• Can a 2016 Ford Explorer 4WD With V6 Be Flat-Towed
  Yes, a 2016 Ford Explorer (4WD) can be flat-towed with all four wheels down so long as it has the 3.5L V6 or 3.5L EcoBoost V6 Engine. That said, there are no modification needed for this unless a specific flat-tow part you are looking at requires this. I have attached some parts for you below as well that you will need. Demco Tabless Base Plate Kit part # DM9519329 (Clean Look) Demco Dominator Non-Binding Tow Bar part # DM9511008 (Easiest To Use) Demco 4-Diode Universal Towed Vehicle Wiring...
  view full answer...

Do you have a question about this Tow Bar Wiring?