Custer Wireless LED Tow Bar Light - Weatherproof - Magnetic Base - 23" Long - 4-Pin Round

See what our Experts say about this Custer Tow Bar Wiring

• Magnetic Versus Wired Magnetic Towing Lights For Long Road Trips
  If you were to go with the either the Custer Wireless LED Tow Bar Light 4-Way # LIW-LDTL or 7-Way # LIW-LDTL-7B I recommend getting 2 of these. That will allow you to have one in the cab charging while using the other one. As they have an expected battery life of 6-8hours per charge this will allow you to switch them out as you stop for gas or food. Otherwise the Magnetic LED Tow Light Kit # TLL21RK will provide you with 20' of wiring to use hard wired lights. These lights uses LED's...
  view full answer...
• Can a 2015 VW Jetta 1.8 CL Be Flat towed
  While many vehicles will have base plates and other components available, only some trim levels are able to be safely flat towed. The OEM is final word on what conditions are needed and what trim levels can be safely towed. We always recommend that you review your vehicle specific owners manual for this information as the OEM is the authority on if a vehicle they manufactured can be safely towed and how. If you can tow your particular vehicle, you'll need base plates, safety cables,...
  view full answer...
• How Many Hours Will the Custer Wireless LED Light Battery Last Between Charges
  The Custer Wireless LED Tow Bar Light # LIW-LDTL has a 4-8 hours battery life before it would need to be charged, so it's not really ideal for the use that you're looking for. With that said, if you could figure out a way to keep it plugged in to a 12v power source inside the tow vehicle you could likely make this work as you're hoping. You could also use a setup like the Roadmaster Standard Magnetic Tow Lights # RM-2120. Check out the attached video to see how easily it is installed.
  view full answer...
• Can Anything Else be Plugged in when Using Custer Wireless LEDTow Light # LIW-LDTL
  The 7-Way connector would be occupied by the transmitter for Custer Wireless LED Tow Light # LIW-LDTL. Any supplemental braking system you use that requires 12 volt power should get that power from the vehicle it is installed in and not from the RV. The reason is because if the vehicle gets disconnected from the RV the braking system will still have power allowing it to apply the vehicle brakes and avoid a runaway vehicle. If you can tell me the braking system you have I can look into how...
  view full answer...
• How to Use Custer Wireless Tow Bar with RV that has 6-Way Round
  The 4-way round connector is very rare and the 6-way round is somewhat common but more rare than 4-way flats and 7-ways so what that means is that we don't have an adapter for your configuration but I have a similar solution. We have a version of the Custer Wireless Tow Bar Light that uses a 7-way blade with the part # LIW-LDTL-7B which we do have adapters for like with the # 337TC1067P which plugs into your 6-way and converts to same connector as the tow bar.
  view full answer...
• Equipment Needed to Flat Tow 2001 Chevy Tracker Manual Transmission 2WD
  According to my research, the 2001 Chevy Tracker RWD w/ manual transmission is capable of being flat towed without modification, however it's not recommended to tow the vehicle above 55 mph. Your motorhome would need a hitch and a trailer connector at the rear. For the vehicle, you'll need a tow bar, base plates, wiring so the vehicle taillights work along with those on the motorhome and a supplemental braking system. The Blue Ox Alpha Tow Bar, part # BX7380 is an excellent choice for...
  view full answer...
• Recommended Flat Towing Base Plates for 2004 Ford F250 and 2005 Scion xB
  The Blue Ox Alexus tow bar has been discontinued for several years, but it would still be compatible with their currently available tow bar base plate kits. The tow bar has a 10,000 lb capacity, so it would work fine with either vehicle. To flat tow either vehicle, you will need a tow bar, base plates, safety cables, a lighting solution so the lights on the two vehicle operate along with those of the tow vehicle and a supplementary braking system. Also, please keep in mind that some vehicles...
  view full answer...
• Base Plate for 2004 Jeep Liberty Thats Compatible with Reese Tow Bar
  As long as your Liberty doesn't have a brush guard on it, the Roadmaster # RM-521423-5 base plate kit would be a good choice. If you DO have a brush guard, use # 521426-1. In order to be compatible with your Reese tow bar, you'd also need an adapter like part # RM-025. I'm not sure which Reese tow bar you have, but keep in mind that some of the Reese towbars have a limited speed rating of 45 mph. The # 40602 bracket you referenced is more suited to something that would have a completely...
  view full answer...
• 4-Way Round Adapter Recommendation for the Custer Wireless LED Lights # LIW-LDTL
  In order to create a male-ended plug for the female 4-way round connector on your Custer Wireless LED Tow Bar Light # LIW-LDTL, you need to use the Pollak 4-Pole Round Wiring Socket # PK11404. Once you have the plug, you then need to route 16-gauge wire # 16-4B-1 to those pins into your current wiring. I went ahead and attached a diagram of the typical 4-way round pin setup along with the vehicle-side 4-way flat wiring diagram. I've also attached a helpful article that walks you through...
  view full answer...
  
• Tow Bar Wiring that Bypasses Vehicle Wiring on a 2015 Jeep Grand Cherokee
  The bulb and socket kit # RM-155-2 is not one of the tow bar lighting systems that is recommended for your 2015 Jeep Grand Cherokee (it doesn't fit) so I do not recommend using it. For another option that bypasses the vehicle wiring you can use a magnetic light kit such as # RM-2120 We also have wireless options # 337TL257M and # LIW-LDTL.
  view full answer...
• Can RV/Tow Vehicle Be Spliced Directly Into 2017 GMC Sierra Tail Lights without Using Diodes
  If you were to wire in the 2017 GMC Sierra 1500 tail lights directly to the tow vehicle there could be back feeding problems which could damage electrical components even if the battery is disconnected. There could also be shorts when the truck is not being towed and its lights are used. Using a diode system such as # TR118821 prevents that from happening. If you do not like the idea of tapping into the tail light wiring and adding diodes another option is a wireless and/or magnetic system...
  view full answer...
• Roadmaster Sterling All Terrain Tow Bar and 2020 Ford Escape
  The Roadmaster Direct-Connect Base Plate Kit - Removable Arms, # RM39FR, is a confirmed fit for your 2020 Ford Escape and will work with your Roadmaster Sterling All Terrain, Non-Binding Tow Bar, # RM-576. In addition, these base plates will work with other Roadmaster tow bars that slide into a trailer hitch, such as the, Blackhawk, Blackhawk 2, Falcon, or Falcon 2. Please see the product review video I have attached. You will also need indicator lights for your vehicle when being towed....
  view full answer...
• Wireless Flat Tow Taillight Options for 2007 Honda CR-V
  Yes, when flat towing your 2007 Honda CR-V, you can use either the Custer Wireless LED Tow Bar Light with Magnetic Base, # LIW-LDTL-7B for a 7-way RV style plug. Or, # LIW-LDTL for a 4-pin round plug depending on your needs. This is a weatherproof, rechargeable battery design with LED's that provides stop, tail, side marker, and turn functions. The magnetic base provides secure grip. Please note the linked product video.
  view full answer...
• Recommended Parts to Dinghy Tow a 2017 Chevrolet Sonic LT Sedan
  I have the perfect setup to dinghy tow your 2017 Chevrolet Sonic LT. For a tow bar I recommend using the Blue Ox Base Plate Kit, part # BX1703. This kit does not require any welding and has base plate tabs that can be removed for a very clean look when you are not towing your Sonic. The next thing that you will need is a tow bar. I really like the Blue Ox Alpha, part # BX7380, for this setup because it works well with the base plate kit and it comes with safety cables. This tow bar it...
  view full answer...
• Installing a Wireless LED Light Bar for Towed Vehicle Lighting
  I might have a solution for you. You will need to replace the current 7-way trailer connector on the RV with # HM48470 that has both a 7-way and 4-way connector. Then you can use the wireless LED light bar # LIW-LDTL plugged into the 7-way with your dolly plugged into the 4-way. You'll also need a 12-volt socket in the cargo area of the vehicle if there isn't already one. You can use # RM-9332. You'll then need to figure out a way to mount the light in your vehicle's window, like you said.
  view full answer...
• Equipment Needed to Flat Tow a 2015 Jeep Grand Cherokee
  All of the equipment that you will need to properly flat tow/dinghy tow your 2015 Jeep Grand Cherokee will be base plates, a tow bar, tow bar wiring for working lights, safety cables, and most states now require a supplemental braking system be installed on any vehicle that is being towed. For your Grand Cherokee I recommend going with the Blue Ox Base Plate Kit # BX1128. I like the Blue Ox systems because you can detach the tabs so that your Jeep has a much cleaner look when not being...
  view full answer...
• Recommended Tow Bar Setup for 2013 Mini Cooper
  I have exactly what you are needing for your 2013 Mini Cooper towing setup. Starting off with the tow bar; Blue Ox has their Alpha tow bar # BX7380 which is what I recommend using. It is very easy to maneuver and it comes with the safety cables for added security when driving down the road. Next you will want your base plates. Blue Ox has their Mini Cooper Base Plate Kit # BX1307 which works really well with the Alpha tow bar. This kit is very well hidden. You can remove the arms when...
  view full answer...
• Tow Bar, Base Plates and Flat Towing Accessories for 1996 Geo Metro
  To flat tow your 1996 Geo Metro, you'll need a towbar, base plates, safety cables, a method of wiring the vehicle so the taillights of the tow vehicle operate those of the Metro and a supplemental braking system. The Blue Ox Adventurer you referenced, part # BX7322 would work fine. For a base plate that bolts to the front of the vehicle frame and provides an attachment point for the tow bar, you could use the Blue Ox # BX3507 (as long as your vehicle isn't a GTI model.) For safety cables,...
  view full answer...
• Availability of Base Plate Adapter For Towing 2003 Mini Cooper Using A Demco Tow Bar
  No worries. You can use the Blue Ox # BX1303 tow bar, and then use a # BX88178 adapter. The adapter will allow your Demco Aluminator, Excali-bar or Kwik-Tow towbar to work with the Roadmaster base plates. To complete your flat towing system, you'll also need safety cables like # RM-643. You will also need a lighting solution so the lights on the towed vehicle work in tandem with those of the RV. Custer offers a simple wireless solution, part # LIW-LDTL. The fact that absolutely no cutting...
  view full answer...
• Recommended Parts Needed to Flat Tow a 2001 Subaru Forester
  The first thing that you will need to get for your 2001 Subaru Forester is a tow bar. I recommend using the Blue Ox Alpha Tow Bar # BX7380 since it comes with the safety cable that you will need to use. The Base Plate Kit, part # BX3605, will work well with the Alpha Tow Bar and has a nice clean look. You may need to use a supplemental braking system in your Subaru for when you come to stop. I recommend going with the Roadmaster Even Brake, part # RM-9400. This is a wireless supplemental...
  view full answer...
• Availability of Wireless LED Tow Light that Uses a Rechargeable Battery
  The exact thing that you just described is the Custer Wireless LED Tow Light # LIW-LDTL. It uses magnets to install on the towed vehicle and has a rechargeable battery so you to not have to purchase AA or AAA batteries to power it. For the light functions to work you will simply need to plug in the wireless transmitter to the 7-Way on the back or your RV or tow vehicle and then flip the switch to the "on" position on the light bar. Since this is made to be installed on the top of a towed...
  view full answer...
• Recommended Base Plates and Flat Towing Accessories for 2014 Ford C-Max
  For the 2014 Ford C-Max, you'd need the Roadmaster Base Plate Kit, part # 524432-1. You'll also need some other items to complete your towing system. You'll need: -Safety cables like part # RM-643. -A wiring solution so the taillights work along with the RV, like the wireless magnetic tow lights from Custer, part # LIW-LDTL. -A supplemental braking system like the SMI Stay-In-Play DUO, part # SM99251 I'll link you to some of our help articles that contain much more information about...
  view full answer...
• Wireless LED Tow Bar Light with Magnetic Base
  The Custer Wireless LED Tow Bar Light with Magnetic Base, # LIW-LDTL is a wireless system that sets on your towed vehicle to provide the needed brake and turn signal indicator lights instead of using the wiring and lights on your towed vehicle. Made in USA and DOT compliant.
  view full answer...
• How to Charge Custer Wireless LED Tow Bar Light # LIW-LDTL
  The Custer Wireless LED Tow Bar Light # LIW-LDTL does have a rechargeable battery and the only way to charge it is by plugging in the included 12V DC/cigarette style adapter charger. It will still function like normal when it's actually plugged in and charging, but you will want to make sure that the 12V outlet in your towed vehicle still gets power when the vehicle is turned off for flat towing. I have attached a short video review on this tow bar light that you can also check out.
  view full answer...

Do you have a question about this Tow Bar Wiring?