Base Plates, Safety Cables, Wiring, and Braking System to Flat Tow a 1999 Honda Accord
Updated 10/06/2010 | Published 10/04/2010 >
Products Featured in This Question
Question:
can i install on honda for a roadmaster tow bar need instructions base plate install.
asked by: bernie
Expert Reply:
We do carry base plates for your 1999 Honda Accord. Take a look at the XL Base Plates, # 1545-1. These are the correct base plates for your vehicle.
I also recommend safety cables and a light kit as required by law. For safety cables, I recommend the Single Hook, Coiled Safety Cables, # RM-643. For a temporary lighting solution, use the Magnetic Towing Light Kit, # RM-2120. These lights have a magnet that will stick to a flat metal surface and plug into a 4-flat on the tow vehicle. For a more permanent solution, I recommend the Tail Light Isolating Diode System with Wiring Harness, # 38955. I have included an installation video and demonstration video of this kit below.
You might also be interested in a supplemental brake kit for the Accord. The easiest to use and to install is the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This unit installs quickly so you are ready to go in minutes. It engages the towed vehicle brakes proportionally to how much the towing vehicle is braking, reducing wear of both the towing vehicle and towed vehicle brakes.
Finally, you will need to check with the manufacturer for instructions on the proper procedure for towing your vehicle because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed.
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Hitch Pin Attachment
- Partially Hidden
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Comparing the Falcon 5250, Falcon 2, and Falcon All Terrain Tow Bars
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Full Flat Towing Set Up For A 2026 Jeep Gladiator Sahara



