Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ready for the road, this pre-mounted tire and wheel combo handles your gear with confidence. Aluminum wheel resists corrosion, and the low-profile tire helps boost fuel efficiency.
This combo comes pre-mounted and aired up, so it's ready to install right out of the box. Whether you're replacing a worn-out setup or prepping a new trailer, you'll save time and skip the hassle of separate mounting and inflation.
With a Load Range D rating, this tire offers strong hauling capacity for gear, tools, or recreational equipment. A great choice for steady performance without upsizing your setup.
This popular bolt pattern works with many common utility, cargo, and boat trailers. It's a reliable match for most small to mid-size trailers, so you can tow with confidence knowing it fits right.
The KR35 tread is engineered to help channel water away from the contact patch, improving grip and stability on wet pavement. Whether you're towing through rain or shine, it keeps your trailer tracking with confidence.
Radial construction helps reduce heat buildup and extend tread life. The included aluminum wheel features a corrosion-resistant white machined finish that stands up to weather, grime, and road wear.
If the tire fails under normal use in the first year, it gets replaced - simple as that. It's just one more way Kenda's helping you tow with confidence, mile after mile.
If the tire fails under normal use in the first year, Kenda will replace it. That's confidence you can count on, whether you're heading to the jobsite or the campsite.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer. Let's take a quick look together at the Kenda Karrier KR35 ST205/75R14 load range D radial trailer tire mounted on this 14-inch white AM08 aluminum wheel. Now this is a complete trailer-ready tire and wheel combo, which means that the tire is already mounted on the wheel as you can see here. So there's no need to buy the tire and wheel separately or have them installed. This is gonna be ready to go right out of the box. As I mentioned, the tire itself, as we also have stamped here, is an ST205/75R14, which is a pretty common tire size for utility trailers, boat trailers, and campers.
It's paired with this beautiful 14-inch white machine aluminum wheel that has a five on 4-1/2-inch bolt pattern, one of the more common bolt patterns out there. So this is gonna fit a wide range of trailers with standard hubs. Now if you're wondering about how to measure your bolt pattern on your trailer, take a look at this product page a little bit lower down. We do have step-by-step, step-by-step instructions that you can follow. That'll walk you through measuring your bolt pattern to make sure this will be a fit for you back to the tire.
This is a load range D, meaning that it has an a ply rating and it can handle up to 2,200 pounds at 75 PSI. So this gives you solid capacity for those heavier loads and dependable performance when hauling. This also has a speed rating of N, indicating a maximum speed of 87 miles per hour. The overall diameter when this tire is fully inflated, is gonna be about 26.3-inches. The section width is going to be 7.9-inches.
Now because this is a radial tire, this is gonna run cooler than your bias ply tires. It's gonna wear more evenly over time. That's gonna help extend the life of this tire and improve stability on the road, especially at those highway speeds. And this does feature Kenda's KR35 tread design, which channels water away efficiently. That means better traction for you and those wet conditions.
More confident control during rain or slick road situations. And this is designed for reliable all season use. The wheel itself is rated for 2200 pounds, so this combo is well matched and built for serious trailer use. The diameter of our wheel measuring bead seat to bead seat is 14-inches. The width of our wheel is 5-1/2-inches. As I mentioned, the bolt pattern is five on 4-1/2-inches. The wheel bolt size is 1/2-inch by 20. This does not come with the center cap, but if you decide to pick one up, you just wanna make sure that it fits the pilot diameter of 3.19-inches. Now if you happen to have any other questions, whether it's about this or anything that we have here at etrailer, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy. Thank you for joining me.
Ratings & Reviews

Kate F.
7/13/2026
New wheels look great Ed, thanks for including the picture! What body of water are you usually out playing on?

Gwendolyn Y.
9/18/2025
I absolutely love your camper, Brian! Where was the second picture taken?

Kate F.
4/15/2026
New wheels are looking sharp Rey! What body of water do you mainly get out on? I am in Missouri and enjoy my nice days out on the boat fishing for bass at Lake of the Ozarks and Mark Twain Lake.

Mike L.
6/24/2026
Those look fantastic Mitch, thanks for the photo!!

James D.
5/27/2026
Brad, thanks for the great review. We’ll definitely be aiming for those 6 star reviews lol Thanks again for choosing etrailer!

Gwendolyn Y.
5/12/2026
Would absolutely love to see how everything looks once the wheels are on. Also, how custom are your custom lug nuts? is it just the length or is there something else to them?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Gwendolyn Y.
5/12/2026
It's almost like these wheels were made to me mounted on your trailer, Keith. Also good luck on the suspension upgrade once you tackle that job. What kind of upgrade were you looking at going, equalizer, shackle upgrade, or all of the above?