Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling gear or equipment at highway speeds, this setup gives you peace of mind. The Kenda 6.90/6.00-9 bias tire carries up to 1,298 lbs at 60 psi and is rated J for speeds up to 62 mph. It’s matched to a steel wheel rated for 1,120 lbs, and the full assembly meets Department of Transportation specs for reliable performance mile after mile.
This bias-ply tire uses six layers of durable nylon cords placed at a 30- to 45-degree angle. The crisscross pattern stiffens the sidewalls so the entire tire flexes together, helping it stay stable and smooth over uneven ground or rough surfaces. It’s a tough, proven design built for trailers that see real use, not just easy miles.
Moisture, grime, and road salt don’t stand a chance against this finish. The 9" diameter × 4" wide steel wheel is finished with an e-coat primer and white powder coat that seal out rust and corrosion. It keeps its clean look season after season and holds up in all kinds of weather.
This wheel uses the common 5 on 4-1/2" bolt pattern with a 2-3/4" pilot hole and 1/2"-20 lug size. Those dimensions make it easy to match to most hubs built for that pattern without extra guesswork or modification.
For the first 12 months of ownership, if the tire is damaged in any way, Kenda replaces it at no charge. That’s on top of the 5-year tire warranty and limited 1-year wheel warranty—extra assurance that your investment is protected wherever you tow.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Kenda 690/6x9 bias trailer tire in a load range C on this nine inch white solid center steel wheel with the 5 on 4.5 inch bolt pattern. Now this is a bias trailer tire by Kenda. It's great for off-road and agricultural use. Provides superior stability and a reduced rolling resistance for a nice smooth ride. The wheel it's mounted on is a solid center steel wheel.
Resists rust and corrosion. Has a white powder coat finish over a new coat primer. And this tire wheel assembly does meet the DOT, Department of Transportation, specifications. The diameter on the wheel, it's gonna be nine inches. The width on just the wheel by itself is four inches wide.
Now this wheel does have a bulk pattern of 5 on 4.5 inches. And if you want to measure that on a wheel, that's an odd number of lugs, like in this case, five. What you can do is pick any hole, say this hole, and then you measure across to either one of these holes. But when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So on this one it'll measure 4.5 inches, so that means it's a 5 lug, 4.5 inch bolt pattern.
Does use a wheel lug size of a half inch by 20. The pilot hole diameter, which is the large hole here in the center of the wheel, that's 2 and 3/4 inches. Weight capacity on just the wheel by itself is 1,120 pounds. The tire size we mentioned, it's stamped on the sidewall, it's gonna be 6.90/6x9. So it's a nine inch diameter wheel it fits on.
Section width on this, 6.5 inches. Overall diameter, the bottom to the top when it's inflated is 21.1 inches, and the tire is a load range C, which means it's a six ply rated tire. So it does have a maximum load capacity of 1,298 pounds at 60 PSI. And this tire does have a speed rating on it. It has a 62 mile per hour speed rating. But that should do it for the review on the Kenda 690/6x9 bias trailer tire in a load range C on a nine inch white solid center steel wheel.
Customer Satisfaction Score:
84% were satisfied with this product
16% of customers were not satisfied
Ratings & Reviews
James D.
7/16/2026
Looks good John, glad to know we've been able to provide that top notch experience. We appreciate you choosing etrailer!
Jerry B.
8/17/2026
I'm glad we got you taken care of! Any big plans with the trailer now?
Heather A.
5/8/2026
That’s great to hear, and sounds like you made a solid call going up a size. It’s always nice when the only tradeoff is just shifting your straps a bit and everything else works even better than before. Really appreciate you sharing that too, especially managing multiple trailers. That kind of real world experience helps a lot of folks feel more confident when they’re deciding what direction to go. What kind of trailer is the new wheel on? Any fun plans?
Kate F.
6/25/2026
They look great Scott! Thanks for including the picture. What an awesome boat too, what year is that? What body of water do you mainly get out on? I bass fish a lot out here in Missouri at the Lake of the Ozarks and Mark Twain Lake. I dabble in some local tournaments but I contribute more than I win =)
Gwendolyn Y.
4/9/2026
They look great, Kristopher!
Michael
10/13/2026
The tires and wheels are working well, no problems
Michael
10/13/2026
Great, no problem
Nick S.
11/3/2025
Each week I feel like I see a new way products are used, and this is a first for me! That is super cool, I am glad you were able to get them working for your application to get that barn made. It is good to know just some spacers and it was able to work. What was the intention behind the barn, animals, hay?
Nick S.
11/4/2025
Christopher H.
9/3/2026
They look great Peter and thanks for adding the photo!
Kate F.
11/19/2025
Glad we had the right fit to keep you rolling to the water! MMMMM Yummy Crappie!! We are located in Wentzville, MO but you can find me most weekends on the Lake of the Ozarks or Mark Twain Lake, I dabble in local bass tournaments, but greatly appreciate the crappie hole at the end of our dock! Thanks for sharing your catches with us, tight lines =)
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher H.
8/4/2026
Glad these worked well for you Andrew and thanks for including the photo!