Comparable Replacement Tire for 20.5x10-10 Tire on Snowmobile Trailer

Question

Question:

Trying to find 20.5x10-10 tires for a snowmobile trailer. Is there a different size I should look for?

asked by: Dean O

0

Expert Reply:

I have a solution for you, but we don't have that particular size tire available currently; I know that the 20.5 x 8-10 is a more common size and maybe you actually have those on your trailer currently. The 20.5x8-10 trailer tires are going to be 20-1/2" tall and 8" wide so you can use the Loadstar K39 # AM1HP54 which are 20.6" tall and 8" wide, so they're a perfect match, really. These tires have a Load Range D (1330-lbs per tire capacity) so they should be more than enough for your snowmobile trailer.

If you actually do have 20.5x10-10 tires, the # AM1HP54 are not going to be wide enough for the wheels you've got on them so you would need to swap the full wheel and tire combo with something like the # AM3H480 which have a 5 on 4-1/2" bolt pattern. The tires in this combo actually have a Load Range E (capacity of 1650-lbs) so they'd also be a good option if you need a bit more capacity, as well.

I've also linked our entire selection of 10" wheels and wheel/tire combos for you to have a look at if you'd like to do some checking on the available options.

expert reply by: Erik B

0

Answer 1

After installing your Tekonsha Primus IQ Trailer Brake Controller #TK90160 you should see the following two-digit display: n.c. which means "power to brake controller without trailer connected." This displays for 15 seconds then changes to…

view full answer...

Answer 2

Two red dots on the display of the Primus part #TK90160 indicate that the controller is on but a trailer is not detected. Since you are seeing that with multiple trailers connected you most likely have corrosion or dirt built up on the brake output…

view full answer...

Answer 3

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

view full answer...

Answer 4

Hey Ron, the mounting holes of the Fulton coupler part #F343000301 that you referenced are 3/4 of an inch from the top of the coupler.

view full answer...

Answer 5

Hi Roger; the tires I see in your last order are the Contender ST205/75R15. It looks like the wheel and tire you ordered was discontinued but I can tell you that the max psi for that tire was also 50 psi. It sounds like you have different tires now…

view full answer...

Answer 6

We don't carry the Tie Down actuators so we aren't going to be able to set you up with a different check valve or master cylinder for what you'd need. We could only recommend a different actuator all together like the Demco part #DM72VR…

view full answer...

Answer 7

You can potentially go down to a 10" wheel but you'll have to make sure all of the specs check out for your pontoon trailer. For example, the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel #AM3H490 has a load range E (1,650…

view full answer...

Answer 8

Yes, the Kenda 205/65-10 Bias Trailer Tire with 10 inch Galvanized Wheel - 5 on 4-1/2 - Load Range E, item #AM3H490, is a a good alternative to 20.5 x 8-10 tire. The load range is the same, both are bias ply tires and they are the same overall size.…

view full answer...

Answer 9

You definitely want to replace all of your trailer's tires ASAP as a tire's life is generally only limited to 6 years old before it needs to be replaced. The highest weight capacity tire we offer in your tire size of 20.5x8x10 is the Load…

view full answer...

Comparable Replacement Tire for 20.5x10-10 Tire on Snowmobile Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching