Trailer Tire and Wheel for Tire Size 20.5 x 8.0 -10 For Use as Spare on Boat Trailer

Question

Question:

Is this avialble in paint painted finish?

asked by: John H

0

Expert Reply:

For your tire size of 20.5 x 8.0 -10 we have the part # AM3H400 which is mounted on a 5 lug wheel and is galvanized. This would work great on your boat trailer as a spare setup.

expert reply by: Jameson C

0

John H.

5/4/2022

Is this avialble in paint painted finish?

Jameson C.

5/4/2022

Yes we do with the part # AM3H480 which is a painted white wheel.

Answer 1

Between the white powder coated wheel on the Kenda #AM3H430 and the galvanized wheel on the Kenda #AM3H440 you are better off going with the galvanized wheel. Galvanized wheels offer the utmost in protection against rust, which is particularly…

view full answer...

Answer 2

The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM3H360 will give you a slightly smoother ride when empty, but I still recommend using the Load Range C option #AM3H400 because it will be a thicker…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 10

There sure is K.C.. For a shorter weight distribution shank that fits a 2-1/2" hitch, I recommend the Equal-i-zer item #EQ90-02-4700. This shank measures 12" long x 9-1/2" tall. It provides up to a 3" drop and has a 16,000 lbs…

view full answer...

Answer 11

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 12

Hi Thomas! The distance from the center of the hitch pin hole to the center of the ball on the #BW77BR is 13-5/8". This is designed to fit a 2-1/2" receiver with a 10k rating for the 2" and 21k rating for the 2-5/16" ball. What…

view full answer...

Trailer Tire and Wheel for Tire Size 20.5 x 8.0 -10 For Use as Spare on Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching