Availability of 1 inch Diameter Red LED Clearance Light for Trailer
Updated 10/27/2025 | Published 03/25/2025
Products Featured in This Question
Question:
I need a red clearance light similar to the Optronics MCL10RKB that will mount in an existing 1” diameter hole. Do you sell a red clearance light for a 1” hole or a grommet that will allow me to mount the Optronics MCL10RKB in a 1” hole?
asked by: Jeff C
0
Expert Reply:
Hey Jeff, we have the Mini Clearance/Side Marker Light w/ Grommet - Submersible # TN96MR which is designed to fit a 1 inch diameter hole like you have. It is also red and 1 inch in diameter as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3/4 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Search Results: trailer light
- Search Results: trailer wire
- Search Results: trailer hubs and drums
- Search Results: trailer ramp springs
- Search Results: trailer wiring
- Search Results: sticker
- Search Results: equalizer
- Shop: Lippert Trailer Brake Drum for 10K Short Axles - 12-1/4" x 3-3/8"
- Shop: Ramp Spring - 2K Torque for 1-1/2" Round Shaft - LH
- Shop: Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole
- Shop: Lippert Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Red Lens
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem Axles
- Q&A: 12 Inch Long Equalizer For 2 Inch Slipper Springs & 8,000 lb U-Bolts For Tandem Axle Trailer
- Q&A: Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
- Video: The Low-Down on the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Video: What to Know About the Square Jack Follow Leg
- Video: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs: The Breakdown
- Video: Comprehensive Review: Spring-Eye Bolt with Locknut for Slipper Springs
- Video: In-Depth Review of the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs
- Video: Trailer Weld-on Stake Pocket Spec Review
- Q&A: Can a Side Marker Trailer light be Wired to Come On with the Blinker
- Q&A: Do 2x4s Get Attached Into the Stake Pocket # C83072
- Q&A: What Size Hole Do I Need To Have For The Optronics LED Mini Clearance Light?
Jameson C.
10/27/2025
Hey Jeff, how did the Mini Clearance/Side Marker Light with grommet work out for your 1-inch hole setup? Your update could make it easier for the next person looking to match that same fit.