bing tracking image
Customer Service My Orders
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class I
  5. 2000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2022 Ford Bronco
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: C11202
8 Reviews | 12 Questions
In Stock
$299.70
 Trailer Hitch
Not Confirmed to Fit

2022 Ford Bronco

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch receiver - custom fit class i 1-1/4 inch
curt trailer hitch class i c11202
curt trailer hitch for towing receiver - custom fit class i 1-1/4 inch
curt trailer hitch class i c11202
curt trailer hitch class i

Show All (5) Product Images

Show Fewer Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11202 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (8)
  • Q & A (0)
  • Related Parts
  • Photos

CURT Trailer Hitch - C11202

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 2,000 lbs (GTW): Great for light-duty trailers, small boats, or campers
  • Holds up to 200 lbs (TW): Works with bike racks, cargo carriers, and Class I towing gear
  • Bolt-On Installation: Installs using factory holes with included hardware, no welding needed
  • Durable Steel Build: Fully welded, round-tube design adds strength for long-term use
  • Rust-Resistant Finish: Gloss black powder coat over base coat protects against corrosion
Made in USA

Features to know about

Carry What You Need Without Overloading: Class I 1-1/4" Receiver with 200 lbs TW and 2,000 lbs GTW

This hitch is built for light-duty towing like small campers, utility trailers, or hauling bikes and cargo carriers. With a 1-1/4" x 1-1/4" receiver opening, it’s rated for 200 lbs tongue weight and up to 2,000 lbs gross trailer weight. That makes it a solid match for carrying a couple of bikes or towing a lightweight trailer without stressing your setup.

Install It Yourself in the Driveway: Bolt-On Design with No Welding Required

The fully welded hitch uses a custom fit, bolt-on design that lines up with factory holes. You’ll just need to enlarge existing holes in the frame—no new drilling or welding. The complete hardware kit and instructions make it doable at home with common tools. It’s a straightforward way to get towing or gear-carrying capability without a trip to the shop.

Built to Last Through Every Trip: Gloss Black Powder Coat over Protective Base

The gloss black powder coat finish sits on top of a protective base coat for strong rust resistance. The round-tube design keeps it looking clean while giving you lasting durability through weather and road grime. Whether it’s weekend towing or daily use with cargo racks, the sturdy steel and precision robotic welds keep the hitch solid for the long haul.

Ready for Accessories and Light Loads: Works with Ball Mounts, Bike Racks, and Cargo Carriers

A drawbar, pin, and clip are sold separately so you can pair it with the towing gear you need. It handles typical ball mounts for towing or bike racks and cargo carriers for extra storage space. When using unsupported loads like bike racks or carriers, a stabilizer strap such as part #18050 helps keep everything tight and secure on the road.

Specs

Receiver Specifications

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I

Weight and Capacity

  • Maximum gross trailer weight: 2,000 lbs
  • Maximum tongue weight: 200 lbs

Warranty

  • Limited lifetime warranty

11202 Curt Class 1 Trailer Hitch Receiver

Installation Details C11202 Installation instructions

This Product Fits The Following Vehicles




Customers Who Purchased This Trailer Hitch Also Bought...





Ratings & Reviews

4.4

8 reviews
5 Stars
(4)
4 Stars
(3)
3 Stars
(1)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
2014 Nissan Cube
First off, I’m 81 years old. I started riding a bike again about 5/6 years ago. I’m so tired of just riding the streets in my town, that means I needed to transport my bike.I I found you, etrailer.com, and am so glad I did. You helped me get the right bike rack and hitch for my vehicle. I do not need any help loading or unloading my bike. I’m free to travel anytime I want. And freedom means a lot at my age. Again, thanks for your help. I am telling all my friends about you.
by:
2013 Nissan Cube
Instructions did not mention having to remove spare tire – no big deal
But not knowing if I should squeeze the exhaust heat baffle between the hitch and the “frame” was more of an issue. I would have had to wreck it if I tried to fold it out of the way.
The inspection hole was a lot farther away than pictured. The fish wire was just barely long enough.
by:
2014 Nissan Cube
Great hitch and trailer harness. I had an expert
install it and it took him 2 hours and not the 1 hour or less
as listed. Fits our 2014 Cube nicely. No complaints from
the mechanic. I would recommend etrailer.com.
by:
this product easy to install, fit good,took me a little longer to install then the catalog said.
by:
2011 Nissan Cube
As advertised super fast delivery
by:
by:
2011 Nissan Cube
by:
8
8
true

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?
  • Best Bike Rack that Allows For Easy Loading Of the Bikes and Into The Hitch
    It sounds like you may have an electric Sun bike Jo. If you have an electric bike I recommend to use the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202 because of the included ramp and easy folding feature. The rack does weigh 45 lbs but it can be folded in half and is designed with a handle so you can easily carry it to the vehicle. Once you have the bike rack in the hitch you can simply walk the bike up the included ramp onto the rack instead of lifting the bike. The Thule...
    view full answer...
    Image 1 for Image 2 for
  • Is there Any Drilling Required to Install Curt Trailer Hitch # C11202 on a 2009 Nissan cube
    To install the Curt Trailer Hitch Receiver, # C11202, on a 2009 Nissan cube, you will need to enlarge holes that are already there, not drill new holes. I have included a link to the installation instructions that shows where the holes will need to be enlarged. If you plan on doing some towing, the recommended ball mount is # C45520 for use with ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use the Hopkins Plug-In Simple Vehicle Wiring Harness with...
    view full answer...
  • Can A Bike Rack Be Installed Using Curt Class I 1-1/4 Inch Hitch # C11202 On 2009 Nissan Cube
    A bike rack can be installed on the Draw-Tite Class I 1-1/4 Inch Hitch # C11202 on your 2009 Nissan Cube, but you will have to be sure that the bike rack is made to fit a Class I hitch. Because of the lower tongue weight capacity of 200 lbs. on a Class I hitch you will also be limited to only 2 bikes on the bike rack. Some of the Class I compatible bike racks are listed as 3 bike and 4 bike racks, but if you look at the description of the bike rack it will say limited to 2 bikes only on...
    view full answer...
  • Curt Hitch C11202 for a 2010 Nissan Cube to Carry a Bike Rack
    I took a look at the install instructions for the Curt Trailer Hitch Receiver part # C11202 for your 2010 Nissan Cube. Based on this, the Curt Trailer Hitch Receiver looks to be an easy enough install because you only have to remove one of the rubber exhaust isolators and you don't have to lower the spare tire. According to Curt, the install should take a novice around 60 minutes to complete. The Curt Trailer Hitch Receiver has a 200 lb tongue weight capacity therefore so long as the vehicle...
    view full answer...
    Image 1 for
  • Trailer Hitch Installation on a 2009 Nissan Cube with Ground Effects
    We do have trailer hitch options for your 2009 Nissa Cube, but the Hidden Hitch Class III Trailer Hitch, # 87538, that you referenced will not fit on your vehicle. This hitch was designed for Nissan pickup trucks. For your vehicle, I recommend looking at the Curt # C11202. According to Curt, this hitch will fit all models of the 2009 Nissan Cube, however they do not mention if any bumper modification is required on the models with ground effects. At this time the only trailer hitches...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for a 2009 Nissan Cube
    The 2009 and 2010 Nissan Cube models use the same hitches. The Curt hitch # C11202 installs under the exhaust. This Curt Class I Receiver, part # C11202 is a quality hitch, when using the hitch for a bike rack or cargo hitch, you will need a support strap like part # 18050. This stabilizer strap will be needed for any non-trailer load like a bike rack or a cargo carrier. I will include links to the products I have recommended, as well as links to the installation instructions for the hitch.
    view full answer...
  • Curt or Draw Tite Trailer Hitch Recommendation for 2010 Nissan Cube
    The Curt part # C11202 is a confirmed fit for your 2010 Nissan Cube and will fit and install just fine. Curt requires a stabilizer strap like part # 18050 when carrying a non-supported load like a bike rack.
    view full answer...
  • Trailer Hitch and Wiring for a 2011 Nissan Cube
    The Curt trailer hitch # C11202 has a gross trailer weight capacity of 2,000 pounds and 200 pound tongue weight capacity. For a trailer that weighs 400 pounds total the tongue weight would only be 40 to 60 pounds so you are well within the capacities of the hitch. Check the vehicle owner's manual for the vehicle capacity (if listed) and go by whichever is lower; the hitch or the vehicle. You will only need to enlarge holes in the frame to install the hitch, not drill new ones. Since...
    view full answer...
  • Availability of Hitch, Trailer Wiring and Towing Accessories for 2014 Nissan Cube
    Curt Manufacturing does indeed offer a Class I hitch for the 2014 Nissan Cube, which we offer as part # C11202. A hardwired trailer wiring harness is also available as part # C56175. You'll also need the # C45520 ball mount and either the 1-7/8 inch trailer ball, part # C40001 or the 2 inch ball, part # C40018. The trailer you're wanting to tow should have the proper ball size stamped into the metal of the coupler.
    view full answer...
  • Does Trailer Hitch C11202 For 2009 Nissan Cube Include Ball Mount?
    Hi Greg, The Curt Trailer Hitch # C11202 is a confirmed fit for your 2009 Nissan Cube, but does not include a ball mount or ball. For that you'd need # C45562 for a 2" ball, or # C45551 for a 1-7/8" ball. You'll also need wiring, but being in Poland, I'm not sure if you'll use the standard 4-way flat we use here in the US. We do not offer shipping to Poland (only the US and Canada for the most part), but you can source a shipping broker to get the part to you, we don't have any we recommend...
    view full answer...
  • Recommended Bike Rack to Carry a Day 6 Bike on a 2012 Nissan Cube
    Trunk mounted bike racks for your vehicle are not strong enough to carry your Day 6 bikes on the back of your 2012 Nissan Cube, so you will need to use a hitch mounted bike rack for your needs. Nissan does not recommend towing nor installing a hitch on your vehicle, but we do offer trailer hitches to fit your vehicle if you want to use a hitch mounted rack. Many Nissan Cube owners want a trailer hitch to be able to carry bike racks and cargo carriers which is why we offer trailer hitches...
    view full answer...
  • Is Drilling Required for Installation of the Curt Hitch # C11202 on a 2011 Nissan Cube
    The only drilling need for the receiver hitche # C11202 available for the 2011 Nissan Cube will be enlarging an existing hole in the driver side frame rail. I attached installation instructions for this Curt Hitch, # 11202. To drill this hole for the Curt hitch, you could drill two smaller holes next to the hole that needs to be enlarged in the frame rail to allow access of the hardware for this hitch. Some items you may be interested in to complete your towing setup are the Drawbar,...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Product Experts Available Now!
Call 1-800-940-8924