Swapping out old bulbs for LEDs makes a big difference in both brightness and reliability. This 6-3/4" tall Peterson LED light uses 35 diodes to handle brake, tail, turn, backup, and license plate functions all in one. At 12V, it only draws 0.16 amps for stop/turn and 0.14 amps for tail—far less than incandescent lights. That means better visibility with less power use and no more worrying about burnt-out bulbs.
Road vibration and moisture can ruin traditional trailer lights, but this one is built to take it. The LED circuitry is fully potted to protect against moisture and road shock, while the polycarbonate lens and housing hold up well against weather and wear. It’s a solid upgrade if you want lighting that stays dependable season after season.
Installation is straightforward with the recessed mount and built-in flange. The included studs fit a standard 3-stud pattern that works for a variety of setups without extra drilling. Once in place, the 5-3/4" wide by 6-3/4" tall by 3-1/16" thick housing sits flush and secure so it won’t rattle loose or stick out awkwardly.
This driver-side light includes a built-in reflex reflector and white LEDs that shine through clear sections of the lens to illuminate your license plate. The red lens covers stop, turn, and tail functions while the clear section handles backup illumination—so every signal stays sharp and visible.
Hookup is simple thanks to the color-coded pigtail harness. The white wire is ground, black handles running lights, red controls stop/turn, and green powers the backup function. Everything connects directly to a 12V DC system for an easy, clean install that’s ready to go once wired up.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at etrailer.com. Today we're going to take a look at this LED five function driver's side trailer tail light with the reflector. It has the red lens. Now this rectangular LED tail light will provide the stop, the turn, the tail, the backup, and even the license plate light for your driver's side application. Has the built in reflex reflector on it to remove the need for a separate reflector. Does use the potted LED circuitry to protect against moisture and road shock.
And it uses LEDs which make great replacements for incandescent lights. The LEDs will last 50 times longer, they're more efficient because they'll provide brighter light with less power output, and of course no bulbs to replace or brittle filaments to break.Now at the end of this video, I am going to hook this up to some power just to show you all those functions. This is all in a nice durable polycarbonate lens and housing. It uses red and a clear lens. Over 35 light LEDs.
And it is compatible with 12 volt DC systems. It has a surface mount design. If you look at the back here, it's surface mounts to the trailer with these included mounting studs. It's a three stub design, fits a variety of applications. Specs on this, the power draw at 12 volts for the stop and turn circuit is 0.16 amps.
For the tail light it's 0.14 amps. Give you some dimensions on this light. The overall width is going to be right at five and three quarter inches wide. Overall height, six and three quarter inches tall. And the depth of just the housing from the back is right at three and one sixteenths inches deep.So what I'm going to do now is we're going to go ahead and hook this up to some power.
I just want to show you all the functions that this light offers. Go ahead and turn the power off. Let me get it all hooked up first. There we go. Okay, now that we've got them all hooked up, I'll go ahead and turn the power back on. And with the power on there you can see the tail light function. I'll go ahead and turn off the overhead lights. There's your tail light. And if you notice the bright light at the bottom, that's for your license plate light, because this is going on the driver's side. And when you do hit your brakes, you can see there's your brake. The brake gets a lot brighter. And then when you hit your turn signals, you can see there's your turn signals. And the other one I wanted to show you was the backup light. So you notice the backup light when you go into reverse, have a very bright, clear lens with the bright LEDs on it. So lets everybody know that you're backing up.Imma go ahead and turn back on our overhead lights and turn off our power. But that should do it for the review on the LED five function driver's side trailer tail light with the reflector and the red lens.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.