Product Experts Available Now!
Call 1-800-940-8924
Replacement Red Lens for Peterson Rectangular Side Marker Light w/ Reflector - Old Style
(357 reviews)
Price: $5.13
In Stock
Peterson
Replacement Red Lens for Peterson Rectangular Side Marker Light w/ Reflector - Old Style
Part Number: 55-15R
In Stock
$5.13
Retail:$15.84
You Save: 68%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (357)
- Q & A (0)
- Videos (2)
- Photos
Peterson Accessories and Parts - 55-15R
- Trailer Lights
- Light Lenses
- Peterson
- Rectangle
- 2-3/4 Inch Long
- Red
- 2 Inch Wide
Replaces the red lens for your rectangular Peterson side marker light with reflector. Fits old style 114R, 115R, 440/440L, and 441/441L series.
Features:
- Replaces the amber lens for your rectangular Peterson side marker light with reflector
- Fits 114R, 115R, 440/440L, and 441/441L (432200 and 432400 - sold separately)
- Built-in reflex reflector removes the need for a separate reflector
- Acrylic lens construction
- Dimensions: 2-3/4" long x 2" tall x 1/4" deep
- Distance between mounting holes (center to center): 2-5/16"
55-15R Replacement Red Lens for Peterson 114R, 115R, 440/440L, and 441/441L
Video of Replacement Red Lens for Peterson Rectangular Side Marker Light w/ Reflector - Old Style
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Peterson Rectangular Side Marker Light Replacement Red Lens Installation
Hey, everyone. It's Evangeline here at etrailer. And today, we're taking a look at our replacement red lens for your Peterson side marker lights right here at etrailer.com. It happens, maybe you are backing up your trailer the wrong way and you clipped your side marker lights so you need to find the replacement part, or maybe you have a new light and you're just looking for the correct parts for it. This is an exact replacement for your Peterson light, but it can also work with your other lights like what we have here as long as you get the measurements right. We have a lot of replacement lenses here at etrailer and a lot of them even fit this type of a light, but this is one of the few that has included hardware.
So, if you need to replace your old one and you couldn't save the screws from your old lenses, well, this has it there for you. All you need is a small Phillips head screwdriver. So, just line up the lens with your light, pop in that screw, and then tighten them down. And just like that, you we're able to replace the red lenses on your side marker light. With this having the screws included, definitely helpful for the install.
I know sometimes you don't have the hardware included and you're gonna have to find your own or see if you can salvage the old ones. So hopefully, that will help you out with figuring out if this is the right fit for you and your lights. So, if you have the old style Peterson light or if you have another light with similar dimensions, this was a look at the replacement red lens for your Peterson rectangular side marker lights for your trailers here at etrailer.com..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.9
357 reviews
by:
Alan
09/19/2026
My order from etrailer went beautifully! Nick K. was super knowledgeable and fast finding the part.The shipping was fair and fast!What more can a guy ask for?!? Thanks Nick and etrailer.You found a customer for LIFE!! Alan
by:
Randy
10/15/2026
Great service and the correct part will use again if I need more parts.
by:
John
04/21/2021
I almost gave up looking for a replacement lens as all the ones I looked at were the "snap on type" until I found a footnote on the etrailer page that indicated there was a manufacturing change for replacement. That change was the screw on type and looking at the body I was replacing the lens on did in fact have screw holes in the plastic mold of the body. (Was not aware they were screw holes). Without that little footnote etrailer provided they would have lost the sale.
by:
Bruce
09/18/2026
Perfect fit as a replacement
by:
Tim
07/25/2026
Perfect fit replacement lens
by:
Gary
01/14/2021
This is Gary’s Rat Rod. The two Peterson lights are on the rear of the vehicle.
Gary
1/15/2022
Great
by:
William
07/22/2020
My experience with etrailer.com was great from beginning to end. They provided information that gave me confidence I was ordering the right replacement part. Price was good and it was shipped fast and received ahead of schedule. I was very impressed!
by:
Tim
07/14/2026
Size was as described! Fit well
by:
Glenn
02/12/2025
Good quality- fit perfectly
Glenn
2/14/2026
Perfect! Was really glad that the lense was available. Saved me $ !
by:
Steven
10/13/2025
It’s a red reflector lens. It’s doing its job by staying in place and reflecting light. Not much else to say.
by:
Shelby
01/24/2016
The lens I purchased came quickly and fit my trailer light perfect.
by:
Garry
03/20/2026
Arrived as described.
by:
Scott
06/26/2017
I needed a replacement lens for a lens on my trailer that was cracked. etrailer's online catalog allowed me to replace this cracked lens at a great price, and it made the purchase go from optional to "why not? Must have". Thank you etrailer.
Scott
6/29/2018
Thanks for your attention to a customer. I must admit, the reason I bought your lights was to make my trailer as attractive as possible to a potential buyer. I sold the trailer not long after I made the purchase with etrailer. Again, those lights, the price, everything, was first class. I no longer own a trailer, or will be buying a trailer in the near future. I owned several, two-wheel small trailers beginning in 2001, but I have disposed of them all. I am 68, and I have moved to a house with no driveway where the trailers were kept. If you glean anything from this email, it would be older owners are less likely to generate sales.
by:
Bruce
11/28/2019
This reflector fit correctly in the side of the tail light assembly to replace the broken reflector. It also comes with both screws to install it on the light assembly. Very happy.
Bruce
12/22/2020
Great
by:
Richard
01/16/2026
Exactly what I needed. I couldn’t find this item on any other site. Thanks
by:
Thomas
02/19/2026
Fit perfect.
by:
David
04/01/2025
Fit perfectly on a very old trailer. Always check your dimensions before purchase. Or ask etrailer for info. Very helpful! Thanks!
by:
Germaine
05/17/2021
Had great service from etrailer. They researched my question, and they gave me the right answer, and sent me the right part. etrailer is the place to go! Highly recommend!
Germaine T.
5/18/2022
No issues!
by:
Neil M
07/26/2016
I've purchased a variety of trailer and towing parts from etrailer over the last few years. I've been very happy with their service and delivery speed every time. This time was just for a replacement tail light lens for a boat trailer I bought recently. I was very surprised to find one anywhere but etrailer had it!
Thanks for the great service.
Thanks for the great service.
by:
Tom N
09/28/2017
The product was as expected (boat trailer small reflector plate). Thanks
Tom N.
10/2/2018
George, it worked fine....thanks for asking...Tom
by:
Grandpa Chuckles
09/13/2020
This was an exact replacement item that I easily found at etrailer.com.
Charles J.
9/14/2021
Exact replacement part and is working great.
by:
Fastttimmy
10/16/2014
I was missing a lens on a trailer light and found some numbers on the assembly. Googling that number found etrailer.com and exactly what I needed. Great search engine service ! Price was low, even shipping was inexpensive ! Service was fast and accurate and I could not be happier with the whole transaction. Trailer light is repaired and live is good, thanks to etrailer.com.
by:
Bruce
08/26/2022
I used this lens to replace one that was damaged on the side of the tail light/brake light assembly on my utility trailer. It was a Perfect Replacement. You would never know it was replaced if you didn't know it already.
by:
Karen
05/14/2018
Took me a while to track down this lens replacement, but etrailer.com had it and shipped it pronto! It's a perfect fit on our utility trailer. Hubby had no problem attaching after reading that this replacement lens screwed in place, unlike the original pop-in lens. (Bought an extra for next time the trailer "backs into" the garage wall!) Thanks etrailer!
by:
Michael
10/14/2019
The entire process, finding what I needed and ordering was very easy. Really liked getting an email when the package shipped with a tracking number. My parts arrived in three days and fit my trailer lights perfectly. I would definitely order again from etrailer.com.
25
357
true
Show More Reviews
See what our Experts say about this Peterson Accessories and Parts
- Replacement Lens For PM 440 151The Peterson Replacement Lens, part # 55-15R, would be the correct lens you are looking for. The lens measures 2 inches by 2-3/4 inches. The distance between the mounting holes is 2-5/16 inches. The mounting screws are included. I have attached a photo with the dimensions shown. Another note is this replacement lens fits Peterson Square Trailer Tail Lights (432200 and 432400). Screw holes are located beneath original tail light side marker lenses for use with this replacement lens on...
view full answer...
- Correct Replacement Lens For PM 440 151This has come up before and we have reached out to Petersen directly about a replacement lens, and they told us that the Replacement Red Lens for Peterson Rectangular Side Marker Light w/ Reflector # 55-15R is the correct replacement. When these lights are being assembled, they are snapped in place which is why yours has the locking tab, however when these lenses break they will be screwed in place as Petersen does not make a snap-in replacement. When you removed this lens, you should...
view full answer...
- Replacement Lenses for Peterson 440-151 Trailer Lights and Wiring Harness for 2017 Mazda CX-5The correct replacement for your 440-151 lights is Peterson Replacement Lens # 55-15R. Although the original lenses do not have screw holes there are entry points for the screws on the mount which you will see when you take off the original lens. As for the lights themselves, they would be incandescent and not LED.
view full answer... - Why Does the Replacement Lens 55-15R have Screw Holes but My Light Does NotThe # 55-15R is the correct replacement lens you would need. Underneath the original lens of your light assembly are the screw holes that the # 55-15R would attach to. The original lens you have does not have the holes, but the assembly does.
view full answer... - Tail Light Lens Replacement For Peterson Light PM 440-151For your broken Peterson PM 440 151 lens, the replacement part actually does have the screw holes. I spoke with my contact at Peterson and the correct replacement lens is the Peterson Replacement Side Marker # 55-15R. In the manufacturing process when the lights are being assembled the side lights are snapped in via machinery, however, when they need to be replaced they do need to be screwed into place. So the holes are there for this purpose. There are entry points for the screws under...
view full answer... - How to Identify Brand and Part Number for Trailer Light to Allow Selection of Replacement LensThank you for the photo of your broken light lens for which you are looking for a replacement. It appears that your lens had two tabs for installation, rather than screws, with one of them now being broken off. I reviewed all of our replacement red light lenses, shown on the linked page, but none shares this exact same construction. The Peterson lens # 55-15R that you referenced appears to match in design and shape but it uses screws for attachment. This lens measures 2 x 2-3/4-inches....
view full answer...
- Replacement Red Lens for Trailer Light That Measures 2-3/4 x 2 x 1-1/4 InchesUsually the actual part numbers for a trailer light will be found on the light's base or on its rear surface. The DOT codes you found on the lens are not part numbers, but since you took measurements of the lens we can check for a replacement red lens using your dimensions. Optronics red lens # A2RB measures 2-3/4 x 2 x 1-1/2 and has mounting holes spaced 2-5/16-inches apart on center. Peterson lens # 55-15R measures 2-3/4 x 2 and has mounting holes spaced 2-5/16-inches apart on center....
view full answer... - Replacement Marker Lamp Lens w/ DOT Number NANE SAE AP2 93The numbers you provided really aren't an identifier for the lens or the lamp they came from so unfortunately it won't help much in identifying a replacement lens, as they're just numbers that signify that the lens meets DOT standards. However, the photo was pretty helpful (thanks for sending it in!) To help conclusively match the lamp to the proper replacement lens, I'd need to know the following: -Dimensions of Lens -Center to Center Spacing of Screw Holes -Any Identifying Numbers From...
view full answer...
- Side Marker Lens Recommendation for a Peterson Taillight Assembly PM440The Peterson Replacement Lens # 55-15R is the correct replacement side marker lens for your trailer lights part # 432200. Screw holes are beneath the original tail light side marker lenses for use with this replacement lens. In the manufacturing process, when the lights are being assembled, the side lights are snapped in via machinery, however, when they need to be replaced, they do need to be screwed into place.
view full answer... - Red Rectangular Trailer Light Lens Cover (2-3/4 Inch x 2 Inch)Thanks for the photo. The Peterson Replacement Lens for Side Marker Light part # 55-15R should be exactly what you need as it measures to be 2-3/4" wide x 2" tall. The mounting holes are 2-5/16" apart on center. The SAE AP2 04 code that you mentioned is only used by the department of transportation and is not a good identifier for replacements as there could be two completely different lights with the same code.
view full answer...
- Replacement Side Clearance Light for Peterson 440 Trailer TaillightSince you have a Peterson 440 trailer taillight currently the correct replacement side lens is the part # 55-15R that you referenced. While your current lens does not have mounting holes once you remove the lens you'll see that there are holes there to install this lens.
view full answer... - Replacement Trailer Tail Lights that Go with Peterson Replacement Lens # 55-15RLens # 55-15R fits Peterson lights # 432200 for the right side and # 432400 for the left side. These should be the tail lights you are looking for. I linked a video showing a typical light replacement for you.
view full answer... - Replacement Side Marker Lens Like # A36RB That Comes with ScrewsHey Remi, if what you need for your trailer taillight lens is the part # A36RB a better solution would be the part # 55-15R which is same lens except it comes with the needed screws too so you wouldn't need to source them elsewhere.
view full answer... - Replacement Trailer Light Lens that Measures 2 inch by 2-3/4 inchSounds like you are looking for the part # 55-15R as this light is 2 inches bye 2-3/4 inches. From mounting hole to mounting hole this light measures 2-5/16 inches. The # AL9RB measures 2-13/16" wide x 2-1/8" tall.
view full answer... - Replacement Side Lens Cover for Square Trailer TaillightI do recommend measuring but it should be the Replacement Red Lens for Peterson Rectangular Side Marker Light part # 55-15R which is 2-3/4" long x 2" tall with mounting holes (center to center) 2-5/16".
view full answer... - Replacement Side Lens For Trailer Clearance Light Marked PM440151Based on the number you listed and the fact that you said side light it sounds like you are looking for the part # 55-15R.
view full answer... - What Side Marker Replacement Lens Fits the Peterson Square Trailer Tail Light PM 440I spoke with my contact at Peterson and the correct replacement lens for the Peterson Square Tail Light is the Peterson Replacement Side Marker # 55-15R. In the manufacturing process, when the lights are being assembled, the side lights are snapped in via machinery, however, when they need to be replaced, they do need to be screwed into place. There are actual entry points for the screws under the lens that you will see when you pop it out. Peterson does not make a snap-in replacement...
view full answer...
- What Side Marker Replacement Lens Fits the Peterson Square Trailer Tail Light # 432400I spoke with my contact at Peterson and the correct replacement lens for the Peterson Square Tail Light is the Peterson Replacement Side Marker # 55-15R. In the manufacturing process, when the lights are being assembled, the side lights are snapped in via machinery, however, when they need to be replaced, they do need to be screwed into place. There are actual entry points for the screws under the lens that you will see when you pop it out. Peterson does not make a snap-in replacement...
view full answer... - Replacement Lens for Peterson Combination Trailer Light # 432400 The correct replacement lens for your Peterson Combination Trailer Light # 432400 is the part # 440-15R. If you happen to also need the side marker lens you will use part # 55-15R. To order the parts simply click "Add To Cart" on the product page and proceed to the checkout process.
view full answer... - Availability of Replacement Side Marker Lens For Trailer Light PM440You might look at Optronics Replacement Side Marker Lens, part # A2RB. This side marker lens is the same length and width as the Peterson Replacement Lens, part # 55-15R, you have referenced, but is 1-1/2 inches tall. The # A2RB lens will fit on a trailer light like the Optronics Square Trailer Tail Light, part # ST2RB.
view full answer... - Replacement Tail Marker Lens part # 55-15R RecommendationThe Peterson Replacement Lens, part # 55-15R, would be the correct replacement lens for your application. You should be able to use the included screws to attach this to the light housing.
view full answer...
- Do I Need To Buy Screws When I Buy The Rectangular Peterson Replacement Lens?The replacement Red Lens # 55-15R actually comes with replacement screws. So no need to grab new ones when replacing your lens!
view full answer... - Replacement Lens for Peterson M125A and M125R Trailer Marker LightsAccording to my contact at Peterson the correct replacement amber lens for your Peterson M125A light is part # 55-15A. This consists of a 2 x 2-3/4-inch lens and two screws. For a red lens use part # 55-15R. Both have a mounting hole spacing of 2-5/16-inches. Please feel free to let me know if your lens' dimensions and mounting hole spacing differs from the above parts.
view full answer... - Replacement Lens For Peterson Square Trailer Light # 440151Per our contact at Peterson, the original lights came with a snap-on lens. The replacement lens is part # 55-15R you came from. They said that they do not make a replacement lens that snaps in place and they mentioned that there are places buit-in on the light so the screws can be used to install the new lens.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Installed by:
Michael B
Installed by:
Evangeline M
Video by:
Thomas T
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
4/22/2022
Still there, doing it’s job.