What Side Marker Replacement Lens Fits the Peterson Square Trailer Tail Light # 432400
Updated 06/05/2013 | Published 05/30/2013
Products Featured in This Question
Question:
need replacement side marker that snaps in like in the picture ,#55-15r has screws
asked by: Virgil B
Expert Reply:
I spoke with my contact at Peterson and the correct replacement lens for the Peterson Square Tail Light is the Peterson Replacement Side Marker # 55-15R. In the manufacturing process, when the lights are being assembled, the side lights are snapped in via machinery, however, when they need to be replaced, they do need to be screwed into place.
There are actual entry points for the screws under the lens that you will see when you pop it out. Peterson does not make a snap-in replacement lens for this light.
Product Page this Question was Asked From
Peterson Combination Trailer Tail Light - 7 Function - Incandescent - Square - Driver Side
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Square
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 4-3/4L x 4-1/2W Inch
- Red
- Peterson
more information >
Continue Researching
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Q&A: Will The Peterson M540 Light Kit Fit A Bracket With 2-1/4" of Head Room?
- Q&A: Does a Trailer Junction Box Have to be Used when Switching from 4-Way to 7-Way Trailer Connector
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Q&A: Replacement Hub for 10k Dexter Drum with 9-44 Marking
- Q&A: How to Easily Determine Trailer Wheel Bolt Pattern
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is 5 on 4-1/2 inch Bolt Pattern for Trailer Wheel
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)