Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keeping your trailer visible doesn’t have to be complicated. This Optronics red trailer reflector meets FMVSS standards for reflex reflectors, so it delivers the brightness and safety coverage you need. It’s also DOT compliant, meaning it meets federal visibility requirements when properly mounted.
No drilling or hardware needed—just peel and stick. The self-adhesive backing makes installation quick on any clean, flat surface. That means you can easily add or replace reflectors without extra tools or wiring. Once in place, it holds securely for a neat, low-profile look.
Made from tough acrylic, this 3-3/16" long by 1-7/16" wide rectangular reflector stands up to weather and road grime. The solid construction helps resist cracking and fading over time, keeping your trailer visible season after season.
If you’re replacing an older reflector, this one lines up with several common models—Wesbar #3355, Truck Lite #98003R3, and Peterson #B483R—so it’s a straightforward swap without guesswork.
With a 3-year warranty backing it, this reflector adds lasting peace of mind along with dependable visibility every time you tow.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hola neighbors, It's Brad here at etrailer. And today we're taking a look and installing the Optronics Red Reflector. That's gonna be nice and easy to just press on and give us the illumination we need without having to run wires. Now, sometimes when driving a trailer and it's dusk and lights are in the eyes of other drivers, you may not have your headlights on yet. But it's gonna be hard to see that trailer. And having a reflector when those headlights, or just the light, hits it is gonna be a great way to let them know that there is a trailer ahead of them.
These are gonna be a quick easy way to denote any protruding portions of your trailer. And you can obviously stick them wherever you want. And that way you can see the outside diameters of anything that's sticking out, like our fender here. Now these are made of acrylic. And so they are relatively strong here.
I don't worry too much about them cracking, even during impact. And as far as size goes, they are a nice little footprint coming in at 3 and 3/16 by 1 and 7/16. And they are DOT compliant. So this is a quick easy way to make your trailer a little bit more visible and just be safer out on the road. The installation's gonna be extremely easy.
The hardest part is gonna be making sure that your trailer fender, or wherever you're mounting it to, is gonna be prepped. So since ours is going on the fender, it had some build up. So we actually sanded that down. Put a nice coat of paint on there. That way it's nice and solid and flat.
Now, this has a double-sided adhesive here. So, really once you have your surface prepped, the hardest part also is gonna be just determining exactly where you want it. And making it even with the other side. So to get this on, just peel this off. And you can see it's got some nice foam here, so there's gonna be a little bit of give. So you kind of contour exactly. Even on this curve, it should be no problem. And, you can see, it says top molded in. So we're gonna keep that facing this way and I've gone ahead and kind of found the spot where I wanna mount it. So we'll go ahead. Just get this pressed in place. Just gonna put a little pressure here. And that's gonna do it. And that was a look at the Optronics Red Rectangular Reflector..
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Product was received in a timely manner and was as depicted in the product information. Small details such as this are important because they completed my project in a professional way. The trailer looks new and the reflectors (along the with the lights) offer good visibility for safety.
I would order from these people again
Like always I am extremely satisfied with etrailer and their parts and service. The part was exactly what I ordered and was delivered un harmed and in a timely manner. The size matched perfectly to the description, and seems to have a good quality peel and place adhesive. Installation is very straight forward and requires no tools, other than I would recommend cleaning the surface with alcohol before placement.
Nice reflectors. I stuck mine on 3 years ago and they're holding up just fine. These got my trailer through state inspection, which requires red reflectors on the rear corners.
Orders are always trouble free and if there is a issue customer service is epic, Apex of their game....Ron
We broke a reflector on our boat trailer, bummer. My husband picked out the reflector he wanted and I ordered it. Simple and easy ordering system. I do recommend etrailer.
Instead of using the sticker that came on the power wheels to represent a reflector I use these. Durable and outstanding quality
Exact Replacement for my NEO enclosed trailer. Price was Right, Fast Delivery.
Glen
12/28/2018
After 1 year, product still working perfectly!
I plugged the unit in the factory plug using
I have never installed or used a brake controller before. I used the connector that was suggested plugged it into the car's connector followed the instructions and it worked with no issues the hardest part, in my Subaru Ascent, was finding a place to put it luckily it fit in a cubby to the left of the steering wheel.
I broke a reflector off of my boatmate trailer. Another store wanted 4$ + 10.50 to ship a new one. Etrailers had the exact same reflector for less than half the cost. I bought one plus a backup for another accident which will probably happen eventually. Very happy. etrailers.com pulled through. Last year I bought a drop hitch and ball unit from etrailers.com when nobody else carried that length. Also average price was much cheaper than competitors for same brand.AGAIN awesome deal. Thanks etrailers.com.
Since I have a 1986 boat and trailer, the trailer reflector lights have disappeared due to age. These replacement reflector lights are great. High quality and easy to install. I ordered the replacements through etrailer.com and received an e-mail when they received my order, followed by a second e-mail, informing me when my order was shipped. Good service and good prices. I will use etrailer.com for any future orders.
Ordered led lights to replace all the lighting on my triaxle trailer. Parts arrived sooner than expected and were a terrific upgrade. I had an issue with one taillight. The item was replaced at no charge, no hassle, no questions asked. Fantastic customer service.
I had looked all over my area here on the central coast of California for these simple stick on reflectors for our horse trailer. Nobody carried them from the local auto parts to the national chain stores. I looked online and found them here. Just what I was looking for. I ordered them and recieved updates every step of the way including when they arrived. Great buying experience, exceptional customer service and very fast shipping in an appropriate package. I will be buying all my trailer parts from your business as I now know who to go to and that you can be counted on to deliver. Thank you so much.
Bought two of these along with two amber ones to replace the already peeling off "paper style" reflectors on my brand new enclosed trailer. I really like the foam backing so they don't peel off as easily. Another great purchase from etrailer!
Cole P.
12/12/2014
Thank you Patrick, these products are still working great!
Exactly what I wanted
The products I purchased are very good, and the service I received was equally good.
The price was satisfactory as well as the rate for shipping charges. Overall, I
would strongly recommend eTrailer.com as a great place to find and purchase
those small and must have items to keep your trailers in top shape.
Ronald W.
10/24/2017
I have had the reflectors for over a year and they are doing great and there is no reason for them not to last for years to come. These are the go to people for your trailer parts.
Good product
exact match to the old reflector. Received the part on time. Thanks
I have installed these Red Conspicuity Reflectors on the blacked-out bumper portion of my 2014 Toyota Corolla. The upper portion of the blacked-out bumper was too curved and the surface too rough to mount these reflectors. The reflectors adhesive sticks fairly well to this surface, but because the surface is slightly curved, it will be necessary to mount the reflectors with small black screws. I have not yet found the appropriate screws for this application. Otherwise I find these reflectors an attractive and functional addition to the automobile.
Fenders worked out better than the original fenders on the trailer. Made my own brackets and mounted fenders with reflectors.
Sorry that it took so long to write a review...good weather for fishing!!!
Quick easy ordering process and fast shipping/tracking and delivery. The product I received was exactly what I needed to repair my boat trailer.
exact replacement
Nice reflector. Trailer sells good parts in
Call was fine. customer support was fine. Guy was nice. No complaints.
nice replacement
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Oliver C.
12/19/2017
Still holding strong