See what our Experts say about this Lippert Camper Jacks

• Will Lippert Scissor Jack # LC285325 Fit Tristar 5000
  Yes, since RV scissor jacks like the Lippert # LC285325 are all universally designed this would fit your Tristar 5000.
  view full answer...
  
• Stabilizer Scissor Jack with 5000lb Capacity and 24” Lift For Use With Power Drill
  I have a solution for you, but when I called Lippert to confirm the size of the bolt on the Lippert Components Scissor Jack # LC285325 they informed me that this particular jack should not be raised or lowered using a power tool, but it does have a 3/4" nut. For that reason, I recommend instead going with the Stromberg Carlson # JSC-24-IND which works with a standard 3/4" socket. If you needed a matching socket for this jack, you can use the Ultra-Fab Speed Socket which is an adapter for...
  view full answer...
  
• Best Stabilizers To Replace Scissor Style Jacks On 2019 Rockwood 2109RS That Rusted
  I recommend switching to the Ark Drop Down Corner RV Stabilizer Jacks # AR34FR on your 2019 Rockwood 2109S. These use a zinc coating for corrosion resistance which is superior to the powder coat finish used on the Scissor Jacks # LC285325 included with your camper. While these jacks do have a different design they compatible and will make extending the jacks quicker since they will fold down.
  view full answer...
• Recommended Replacement Upgrade Stabilizer Jacks for a Winnebago Winnie Drop 170S
  I have some great stabilizing jack options for a Winnebago Winnie Drop 170S. The factory jacks would have likely been Lippert so in which case we offer the Lippert Scissor Stabilizer Jack part # LC285332 or part # LC285325 for manual or the Lippert Components High-Speed Power Stabilizer Jack part # LC298707 for an upgraded electric option. Winnebago does not actually make the stabilizer jacks, they are outsourced to another company, Lippert Components I believe is the OEM.
  view full answer...
• Stabilizer Jacks for 2022 Jayco Jay Flight Travel Trailer
  I have no way of looking up which stabilizer jacks were used on your Jay Flight travel trailer, as the RV manufacturers don't categorize that information in a way that's easily accessed, but the Lippert # LC285325 offers a high 5000 lb capacity and a maximum lift of 24 inches which fits most needs. The stabilizer is sold individually, so for one on each side, you'll need to order two of them. Another option is a powered stabilizer jack system like the Lippert # LC369774 which provides...
  view full answer...
• Replacement Stabilizer Jack for 2013 Starcraft AR-ONE
  A 2013 StarCraft AR-ONE will use a Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs - Qty 1 # LC285325. I've attached some measurement in an attached photo to assist. There isn't a direct replacement part number I can look up but this jack is a standard from manufacturers and will work well for your replacement.
  view full answer...
  
• Can You Replace the Threaded Rod in the RV Scissor Jacks
  There are no replacement parts for the trailer scissor jacks, if they are damaged such as the rod being bent then you will simply need to replace the jack for which we have the Lippert Scissor Stabilizer Jack part # LC285325 or part # LC285326 for the pair. The mounting pattern is pretty standard so they should be an easy bolt-on swap for most applications.
  view full answer...
• What Size is the Nut on the Lippert Scissor Stabilizer Jack?
  You will need a 3/4" socket to operate the Lippert Scissor Stabilizer Jack item # LC285325.
  view full answer...
• Mounting Bracket Dimensions For Lippert 24 Inch Stabilizer Scissor Jack
  The mounting brackets for the scissor jacks we offer do vary. I went to the warehouse and took some measurements of the Lippert Components 24 inch Scissor Jack, part # LC285325. I have attached a photo of the mounting brackets with the dimensions shown. This scissor jack measures 4-5/16 inches tall when fully retracted and 28-5/16 inches when extended. The jack measures 26-13/16 inches long when retracted. I have attached a link to our product page for the scissor jacks we offer.
  view full answer...
  
• Single Replacement Stabilizer Scissor Jack for 2020 Imagine 2670MK Trailer
  I can help you determine which single stabilizer jack is the best option for your 2020 Imagine 2670MK, though there isn't a list or any type of database, for example, that has specific replacement parts for trailers. That said, all you really need to know is the amount of travel you need as scissor jacks are universal fits. The best option is likely the 24 inches of lift of the Lippert Scissor Stabilizer Jack # LC285325, which has a 5,000 lb capacity. It also uses a handle (part # LC285324)...
  view full answer...
• Which Direction Should I Mount the Lippert Scissor Stabilizer Jack LC285325?
  Hey James! It comes down to whatever is the easiest way to mount them and access the jack with a crank handle. The Lippert Scissor Stabilizer Jack item # LC285325 you were looking at can be mounted in either orientation. I have linked an installation video to show you how to get this jack set up.
  view full answer...
• Can Electric Motor be Installed on Lippert Scissor Stabilizer Jack
  As long as you are able to get the motor to fit the Lippert Scissor Stabilizer Jack # LC285325 I see no problems with doing that. Typically you'd use the Manual Hand Crank # LC285324 to operate the jack which has a 3/4" socket. It would also be worth noting the various dimensions of this stabilizer jack. I have attached some photos to this answer page for you to reference and compare with what you currently have. Please note that this jack is only meant to help stabilize your trailer and...
  view full answer...
  
• What Is The Width Of Base On The Lippert Scissor Stabilizer Jack
  Thank you for including your photo. I pulled the Lippert Scissor Stabilizer Jack - 24" Lift - 5,000 lbs # LC285325 from our warehouse and measured across (right over the Stabilizer Jack sticker pictured) and this jack provides the 2-1/4" of width you're looking for. The side surface is definitely flat however you can see from the image that the corners are rounded. Included is a helpful review video for additional information as well.
  view full answer...
  
• Will Drilling Be Required to Install Lippert Scissor Stabilizer Jacks
  The Lippert Scissor Stabilizer Jacks # LC285325 mounting plate is designed to be a universal fit that will match most scissor jacks installed at the factory, but it's not necessarily always going to be a perfect match. Unfortunately there is not a mounting bracket available for these jacks and in the event that the holes don't match up to your existing holes you'll need to drill new holes in the trailer frame to match the stabilizers.
  view full answer...
• Scissor Stabilizer Jack Screws Will Not Turn
  Hello Tino, thanks for reaching out. Are you able to turn the handle for the jack at all? Or is the whole thing locked up? If the handle turns but the jack does not move, it could be the nut on the other side is stripped and is not allowing the jack to go up or down. If the main screw isn't turning, it could be the screw has somehow disconnected from the screw. There is no lock mechanism for these jacks. It could be they are just too rusty/corroded, and they seized up. Either way, it sounds...
  view full answer...
• Where Are the etrailer Scissor Stabilizer Jacks Made
  The majority if not all of the Scissor Stabilizer Jacks like part # TJSC-24 are going to be made overseas. That said, this is not a sign of poor quality because if you look at the reviews you will see a reflection of a quality well made product. If interested, we also have other options with more lift such as ones from Ultra-Fab part # UF48-979006, Lippert part # LC285325, and Stromberg Carlson part # JSC-24-IND.
  view full answer...
• Will Lippert Stabilizer Jacks Fit 2015 Passport Ultralight
  Yes, the Lippert Scissor Stabilizer Jack # LC285325 that you referenced will work great on your 2015 Passport UltraLight bunk house. These have 24 inches of height and have a capacity of 5,000 lbs per jack so with four of these your RV would be very stable!
  view full answer...
• What is the Measurement of the Mounting Brackets and Mounting Bolt Space on the Lippert Scissor Jack
  The inside of the mounting plates on the Lippert Scissor Stabilizer Jack - 24" Lift # LC285325 are 3-1/2 inches wide. As far as the circular mounting bolt spaces from center-to-center, that measurement is 1-1/4 inches. The bolts that you need for those holes need to be 5/16". I went ahead and attached a diagram that shows more dimensions. Note: the width of the plates are in the written description and not shown in the diagram. With that being said, we unfortunately do not carry any other...
  view full answer...
  
• Does Lippert Scissor Stabilizer Jack Have a Capacity at Different Heights
  There is not a specific capacity for the Lippert Scissor Stabilizer Jack # LC285325 at 6 inches to 8 inches high; they simply have a 5,000 lb capacity per the manufacturer. I have added a link to a video review as well of the Lippert Scissor Stabilizer Jack # LC285325.
  view full answer...
• Stabilizer Jack That Extends 24 Inches For 5th Wheel Trailer
  While there is a stabilizer jack that extends 24 inches, there aren't any swing-down jacks like the # TJ01RT that have that amount of extension. What you can use is an option from Lippert: - Lippert Scissor Stabilizer Jack - 24" Lift # LC285325 This jack has a 5,000 lb capacity as well, which is a far better weight capacity for a 5th wheel trailer than the 650 lbs of the swing-down jack, which is more for smaller travel trailers.
  view full answer...
• Can the Lippert Components 24 Install on Both Sides of Trailer
  The scissor jack part # LC285325 that you referenced can be installed on the right or left hand side of a trailer. In other words they are ambidextrous. To raise the jack you would turn the handle clockwise, and to lower it counter-clockwise.
  view full answer...
• Do You Make Custom Compartment Doors?
  I am sorry Greg that is not something we do.
  view full answer...

Do you have a question about this Camper Jack?