What is the Measurement of the Mounting Brackets and Mounting Bolt Space on the Lippert Scissor Jack

Published 08/27/2021

Question:

What is the measurement on the inside of the mounting brackets? My trailer has welded on brackets from the factory, they are 2.25 inches inside Also it would be helpful to have the mounting bolts space as well center to to center. Mine are spaced 2 inches apart. this is for a 2019 aspen trail 1900RB

asked by: Mike W

Expert Reply:

The inside of the mounting plates on the Lippert Scissor Stabilizer Jack - 24" Lift # LC285325 are 3-1/2 inches wide. As far as the circular mounting bolt spaces from center-to-center, that measurement is 1-1/4 inches. The bolts that you need for those holes need to be 5/16". I went ahead and attached a diagram that shows more dimensions. Note: the width of the plates are in the written description and not shown in the diagram.

With that being said, we unfortunately do not carry any other brands/models that have 2-1/4 inch wide mounting bracket measurements or have 2-inch bolt spacings. The best way to proceed is to cut off the welded brackets and to a jack like the Lippert Scissor Stabilizer Jack to your frame of your 2019 Aspen Trail 1900RB.

expert reply by: Bob C