Replacement A-Frame Trailer Tongue Jack For a Jayco Baja Pop Up Camper
Published 06/10/2024
Products Featured in This Question
Question:
I have a jayco Baja pop up. The current jack needs to be replaced. Fully retracted with no wheel the jack stick down just under 6 inches. I need the jack to raise at least 16 inches. Do you have one like that?
asked by: Tj p
Expert Reply:
First you are going to want to check the diameter of the opening on your Jayco Baja pop up camper. I have seen several times the round hole is only going to allow for a 2" diameter Jack # DL22530. Otherwise we do have the more common 2-1/4" Jack # TJA-5000S-B like you found. While these jacks do only have a 15" or 15-5/8" extension they do hang a bit lower than your current jack. Also you can use the Flip Foot # FA88-00-4500 on the 2-1/4" jack to quickly gain another 4" of height. Personally I like to use the Jack Stand # CAM44635 as it provides a large surface area to distribute the weight rather than sinking into the ground or asphalt. It is 8" tall so this will save you from having to crank the jack all the way to its maximum length which will make it more stable and less likely to become damaged or bent.
Product Page this Question was Asked From
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jacks
- Standard Grade
- 4001 - 5000 lbs
- Manual Jack
- 16 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- etrailer
more information >
Continue Researching
- Shop: Phoenix Electric Trailer Jack with Remote - A-Frame - 26" Lift - 5,500 lbs
- Q&A: A-Frame Jack Recommendation for Jayco Trailer that Needs 2 inch Outer Tube Diameter
- Shop: Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 6" Extension - 1,400 lbs
- Shop: Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 4" Extension - 1,600 lbs
- Search Results: phoenix
- Video: Ultimate Overview of the Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks
- Video: An In-Depth Look at the Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks
- Video: In-Depth Review of the Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks
- Q&A: Can a Leg/Foot be Added to the Pro Series Jack # PS1401440303
- Q&A: Will Fastway Flip Automatic Fold-Up Jack Foot Function When the First Ground Contact is Horizontal
- Q&A: Reduction in Ground Clearance with Fastway Flip Fold-Up Jack Foot FA88-00-4500 in Stowed Position
- Q&A: Will the Fastway Flip Automatic Fold-Up Jack Foot Work With the Bulldog Round, A-Frame Trailer Jack
- Q&A: Is the Bulldog BD178203 Compatible with the Fastway Flip Foot
- Q&A: Is the Camco Trailer Tongue Jack Stand # CAM44635 Safe To Use With 760LBS Of Tongue Weight?