This actuator uses a surge-type hydraulic system that works in sync with your tow vehicle’s brakes. When you slow down, the internal roller design keeps the telescoping motion straight and smooth, pushing hydraulic pressure to your disc brakes for even stopping power. With a 20,000-lb capacity and 2,000-lb maximum tongue weight, it’s built to manage serious weight without jerking or lag.
The zinc plating shields the sturdy steel body from rust and corrosion, so it holds up well on trailers that see wet or gritty conditions. The durable housing also resists bending if the trailer jackknifes, keeping the actuator aligned and functional over years of use.
Mounting this actuator is straightforward thanks to its bolt-on design for a 3" wide channel tongue. The adjustable channel gives you three mounting positions and a 4" vertical range to dial in the height you need for your setup. No special welding or fabrication is required—just a clean, solid fit.
The integrated breakaway system adds an extra layer of safety by applying the trailer brakes automatically if it ever separates from the tow vehicle. The included lunette ring pairs with a pintle hitch for a strong, no-nonsense connection that’s ideal for heavy farm or construction trailers.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at the adjustable channel brake actuator. This hydraulic actuator is designed to synchronize your trailer brakes with your tow vehicle breaks. It features a unique roller design which reduces resistance during telescoping to create straight line movement. Basically what happens is when you apply the brakes in your tow vehicle deceleration occurs and momentum actually pushes your trailer towards the rear of your vehicle. With surge brake systems the actuator is triggered as your trailer moves forward while the tow vehicle slows down. The actuator telescopes which applies force to a master cylinder which in turn supplies the necessary hydraulic pressure to engage the brakes on your trailer.We're looking at a really nice sturdy durable steel construction.
It's designed to resist bending and jackknife situations. Easy maintenance design when it comes to lubricating the internal components. You've got the grease zerks right here so you attach a grease gun, pump in the grease. It's going to keep everything functioning as it's intended to. The adjustable channel on the front has three different mounting positions for a coupler.
It does come with the included lunette ring. This is for use with pintle hitches. Also, it has the chain on here connected to the break away lever so this would connect to your tow vehicle and in the event where your trailer and tow vehicle separate your vehicle will pull on this chain. It'll pull the lever which will then engage the trailers brakes bringing it to a safe eventual stop. Break away kit is in included.We're looking at a nice zinc plating which provides rust and corrosion resistance.
It's a bolt on installation. Mounting channels down here. This is designed for disc brakes only. The mounting channel is designed to fit a three inch wide channel tongue. Vertical range of adjustment is four inches.
The lunette ring inner diameter is three inches and then this section right here measures one and five eighths inside edge to outside edge. Capacity, that's engraved right here on the top of the unit, 20,000 pound capacity with a maximum tongue weight capacity of 2000 pounds. This black piece right here, this is the cap for the fluid reservoir so you can remove that, gain access to the reservoir if and when needed. You've got your connection points for your hydraulic lines right there on the back side of the unit.Over all, nice durable design. I do want to point out that the hardware for attaching the coupler to the actual bracket, that's included. It comes with your bolts and it comes with the lock nuts there. That's going to do it for today's look at the adjustable channel brake actuator.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.