Durable cast coupler features the easy-to-use Wedge Latch for simple, quick hookup and can be used with an adjustable-height bracket for moderate customization.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody Adam here, with etrailer. Today we're gonna be taking a look at the Bulldog Cast Head Adjustable Trailer Coupler. So what you're gonna need with this, it only comes with the coupler. It's gonna need a two inch ball for your vehicle. So if you don't have one, pick one here up at etrailer. It's made of cast, has a nice powder coated finish and this is gonna insert inside a three inch wide channel.
So if you don't have a channel, you can grab those here at etrailer as well. But if you do, just make sure that the inside is gonna be three inches. There is a little bit of play and the hardware is included. So if you have maybe a couple washers, you can put that in there just to make this nice and tight. That would definitely be something I would add to it.
Another thing you're gonna need is, we have a wedge style latch right here. Spring loaded, which is really cool but it does not come with a pin. So I like these pins. That'll insert in here. This one's a little long for this but you're definitely gonna want to get a pin as well.
But when it comes to this, it's gonna have a capacity of 8,000 pounds. So you just wanna make sure that whatever you plan on putting on your trailer, make sure you're not gonna exceed that, but everything really comes with it. All you have to do is just either weld on a channel like this, or if you already have one, all have to do is just take the old one out and put the new one in. You just need a 24 millimeter socket wrench to tighten these down. And it's pretty simple stuff.
If I we're to compare this to something else that we have on our website, the latch is probably the biggest difference. So we have one that we pulled off and this is the Easy Latch. So with this one, you can pull this latch up and it'll stay up. And as you can see this one isn't gonna do that, unless we have a pin or something in place. So that is one upgrade that you could look for. Because this, you can even keep it closed like this. And as you lower it down, it's gonna go up like that. And then pop into place. So we do have those options on our website as well. But I do think this is gonna be a great option for you. Couple of measurements for you. The overall length of this coupler is about eight and a half inches. From the center of the mounting holes to the end, it's about eight inches and the overall length it's gonna add to the edge of our channel is about seven. And that'll do it for our look at the Bulldog Adjustable Cast Head Trailer Coupler..
Condition: Surface Scratches
Notes: Item has cosmetic paint chips. Otherwise unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.